1. Ball Mounts
  2. Curt
  3. Fixed Ball Mount
  4. Fits 1-1/4 Inch Hitch
  5. Class II
  6. 3500 lbs GTW
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs

Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs

Item # C45520
lowest price pledge
Retail:$32.78
Our Price: $23.57
You Save: 28%
Ball Mounts
Orders above $99 qualify for Free Shipping
Shipping Weight: 6 lbs
Quantity: 
In Stock, Ships Today
C45520 - Steel Shank Curt Ball Mounts
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Sturdy steel ball mount with solid shank measures 9-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. CNC-machined for clean, straight lines. Powder coat gloss finish is corrosion resistant. Call 800-298-8924 to order Curt ball mounts part number C45520 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs. Ball Mounts reviews from real customers.
  • All Info
  • Reviews (93)
  • Q & A (116)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Ball Mounts - C45520

  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Class II
  • 3500 lbs GTW
  • Drop - None
  • Rise - 3 Inch
  • Curt
  • No Ball
  • Steel Shank

Sturdy steel ball mount with solid shank measures 9-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. CNC-machined for clean, straight lines. Powder coat gloss finish is corrosion resistant.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Drawbar can be used in rise position only
  • Sturdy steel construction with solid shank
  • High-quality manufacturing process
    • CNC-machined for strong, consistent cuts and welds
    • 7-Stage washing method delivers smooth, clean surface
  • Corrosion-resistant, black gloss powder coat finish
  • Hitch pin and clip or hitch lock sold separately
  • Assembled in the USA


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Compatible with Class l and Class ll hitches
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 350 lbs
  • Length: 9-1/4" from center of hitch pin hole to center of ball hole
  • Rise: 3-1/8" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


D-20 45520 Curt Ball Mount - 3-1/8" Rise - 3,500 lbs







Video of Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Ball Mounts - Fixed Ball Mount - C45520 Review

Today we'll be reviewing part number C45520. This is the Curt Class 2 draw bar with a 3 1/8 inch rise, 9 1/4 inches long rated at 3,500 pounds. This is made from a sturdy steel construction. It's also corrosion resistant with a black gloss powder coat finish. It has a high quality manufacturing process. It's CNC machined for strong consistent cuts and welds, and it goes through a seven stage washing method that delivers smooth clean surfacing. Keep in mind that when using this product the draw bar can be used in the rise position only so that's in this position here.

This part would slide into the receiver tube of your hitch. You would line up your pin hole and then you'd need to secure it with a 1/2 inch pin or clip, or hitch pin and lock. Those items are sold separately and you can refer to our website with this product page underneath related items to view those products. This is designed to fit 1 1/4 inch by 1 1/4inch trailer hitch receiver. The shank here at the back is a nice solid shank. The only hollow point is here where your hitch pin and clip would go.

This has a gross towing weight of 3,500 pounds with a maximum tongue weight capacity of 350 pounds. This product gives us a ball hole diameter of 3/4 inch. The measurement from the center of our hitch pin hole to the center of the ball hole measures 9 1/4 inches. This is going to give us a rise of 3 1/8 inch and that's from the top of the inside of where you hitch opens which would also be the top of our shank to the top of our ball platform. That's going to complete today's review for part number C45520. This is the Curt Class 2 draw bar with a 3 1/8 inch rise rated at 3,500 pounds.

.


Customer Reviews

Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs - C45520

Average Customer Rating:  4.7 out of 5 stars   (93 Customer Reviews)

Sturdy steel ball mount with solid shank measures 9-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. CNC-machined for clean, straight lines. Powder coat gloss finish is corrosion resistant.

- C45520
by:

Natalie, was very knowledgeable and helpful throughout the whole ordering process. she googled and verified with her vender to make sure the order matched my Volkswagen. I have never installed a hitch on a car before and was very worried if I was going to get the right things. She even emailed me letting me know my that my order was delivered to my door this afternoon. If you call and order as for NATALIE. 690916



- C45520
by:

I was very suspicious how will it fit and suit Dodge Challenger. But when I received trailer hitch, and by they way it travelled across the planet to reach me, I was totally impressed with the quality, ease of installation and accessories which I ordered with it. I basically installed it myself with a help of a friend, it took about 30 minutes to fix it. It really saved me as I needed the trailer to transport my bike to the race track and I didn't want to change the car. So the conclusion, I own it for more than a year and have zero issues or complaints about the hitch or accessories. I used to travel long and short distances and in average I use it every second week. You barely can notice it when you remove drawbar so it is very good solution. 681808



- C45520
by:

I would give five stars but due to what looks like packaging problems the hitch came very marred and the coating chipping off. 483912



- C45520
by:

Product comes basically unusable due to a lazy omission of the pin needed to connect the hitch receiver and tongue. This part must be purchased separately from an outside source if the absence is not realized in time, rendering the entire experience troublesome and inconvenient. Customer service is defensive and unable to convey empathy or remorse for customer dissatisfaction. Would strongly discourage future customers from considering this company. 646463


Comments
The pin and clip is sold separately as part F-4, as stated in the product description.
-- Mike L - 05/25/2019

55740

- C45520
by:

It's a awesome hitch and it fits perfectly good on my 1986 chevy elcomino to pull a trailer some time 735062



- C45520
by:

Everything was great and it was a quick delivery. Unfortunately. I was expecting a hitch pin but it was not included. 729823


Comments
Some drawbars do include a pin and clip, but Curt does not include the pin and clip with this drawbar. This allows you to choose a standard hitch pin like # F-4
Curt Class I and II Pin and Clip - 1/2" Diameter
$1.94
or a locking hitch pin like # e98879
etrailer.com Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2" Span - Chrome
$13.70
to use with your setup.
-- Victoria B - 12/09/2019

63737

- C45520
by:

Nice solid product. Can’t beat price, e ither. 705313



- C45520
by:

Sturdy, quality Curt product. Accepted ball without a problem. 678917



- C45520
by:

I ordered a hitch and wiring kit for my 2010 Kia soul.ordering was easy and it was delivered when they said it would .got in my shop that evening and installed both on my car .it was easy and really didn't take that long and saved me a bunch of money .if I would have bought it locally it would have cost me several hundred dollars more.good prices 665146



- C45520
by:

Seems to be of Great Quality and Crafts manship. 652527



- C45520
by:

works as one thinks it should. 647305



- C45520
by:

for a little more money, get this one ! !! 638387



- C45520
by:

I ordered this ball mount with the recommendation based on vehicle application. I found it to be an accurate fit with just the right amount of rise to level my trailer. After a year of winter salt spray the finish still looks great! 621561



- C45520
by:

Good fit. Works as it should. 617256



- C45520
by:

I got a trailer from you to haul an ATV that I got for my son. It works great, great price and good quality. and your employes where very helpful. Thanks 611358



- C45520
by:

I got a trailer [hitch] from you to haul an ATV that I got for my son. It works great, great price and good quality. and your employes where very helpful. Thanks . 611356



- C45520
by:

Fit great. No issues. 606584



- C45520
by:

Yes 606400



- C45520
by:

Right parts, right place, great service. 598956



- C45520
by:

Fit my 4 wheeler 580274



- C45520
by:

Fits good package was broke open needs boxed differently would be nice to add pins onto them 564140



- C45520
by:

Drawbar is of top quality in appearance, finish, and certainly looks to be heavy duty enough to tow around a 3000lb car. Looks to me to be sturdier than the euro style drawbar. 563392



- C45520
by:

It does the job at a great price. 561319



- C45520
by:

Love this product. Thank you for you su pport. 551714



- C45520
by:

Product was delivered as described and on time. The sales rep who helped me place the order was terrific. I highly recommend this service. 544239


29
97
Show More Reviews

Ask the Experts about this Curt Ball Mounts

  • Recommended Trailer Hitch for 2019 Volkswagen Jetta
    The available 1-1/4-inch Class I hitch options for your 2019 Jetta include the Curt round tube hitch # C11540 and the Draw-Tite model # 24978. The Curt offers easier installation but its cross tube will be visible under the bumper cover. The Draw-Tite hitch installation requires removal of the entire bumper fascia and the bumper itself but gives you a much more discrete appearance once installed. The linked photo shows the Draw-Tite hitch. Both hitches include all of the required mounting...
    view full answer...
  • Do Trailer Hitch Receivers for 2017 Chevrolet Trax Include a Wiring Harness
    We do have two trailer hitch receivers to fit your 2017 Chevrolet Trax: a Curt # C11527 and a Draw-Tite # 36554. Neither of them include a wiring harness. As of right now we only carry one wiring harness for your Trax, the Tekonsha # 118751. It plugs into a factory connector that's in your rear cargo area under the floor cover and some interior paneling. Then you'll need to run a wire to the Trax's battery through the included fuse holder. The fuse is included as well. This harness...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2018 Hyundai Tucson Sel Plus
    When we research towing capacities we base it off of what the owner's manual says but for some unknown reason there are no online manuals available for a 2018 Hyundai Tucson. I did take a look at the Hyundai website and as you said it listed the SEL Plus as having a 2,000 lb towing capacity as opposed to the 1,500 lb capacity of the SE and SEL; however, it looks like the SEL Plus only has some interior features differentiating it from the SE and SEL so it would not make sense for the capacity...
    view full answer...
  • Parts Needed to Tow 4 x 8 Utility Trailer with 2017 Volkswagen Jetta
    We do have light-duty 1-1/4-inch Class I hitches for the 2017 Volkswagen Jetta 4-door sedan that are shown on the linked page. Both share the same towing capacity of 2000-lbs. Since there are four different versions of the 2017 VW Jetta (the S, SE, SEL and GLI) to confirm your model's towing capacity you need to check your printed manual. Currently VW's website does not have online manual access due to them redesigning their application. I suggest the Curt Class I hitch # C11474 over...
    view full answer...
  • Correct Ball Mount Recommendation to Tow Malone XtraLight Trailer with PT Cruiser and Curt Hitch
    You asked a great question about picking out the correct rise/drop ball mount for towing the Malone XtraLight Trailer part # MPG525G. Basically you want to go with the ball mount that has the correct rise/drop to allow the trailer to sit as level as possible. So when the Curt hitch part # C11132 is installed on your 2010 Chrysler PT Cruiser it's going to have a distance of 11-1/4 inches from the top of the hitch opening down to the ground and the Malone trailer has a distance of 15 inches...
    view full answer...
  • Recommended 3 Inch Rise Ball Mount for 2 Inch Trailer Hitch Receiver
    The closest option we have available to the Curt Drawbar # C45520 you referenced that is designed for 2 inch hitch receivers is the Curt Solid Ball Mount # C45313. This is a really nice ball mount that features the same 3 inch rise but can also be used in the drop position for a 4 inch drop. It has a towing capacity of 12,000 pounds. It measures 10 inches from the center of the hitch pin hole to the center of the ball hole. I have attached a short video demonstration on this product...
    view full answer...
  • How to Determine the Rise/Drop of Class I Ball Mounts
    There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that of the receiver, you'll need a ball mount with a rise. If the coupler height is smaller than that of the...
    view full answer...
  • Why are There Different Hitch Fits for the 2015 Jetta SE and TDI
    The undersides of the two vehicles you referenced are different enough to need a different hitch for the SE and TDI models of the 2015 Volkswagen Jetta. If you look at the two pictures I attached you will see that there are quite a few differences. Especially on the passenger side. Since you have a non-TDI the only hitch I can recommend for you is the # C11474 which I attached an install video link for. For trailer wiring you would then want the part # 118572 which I attached an...
    view full answer...
  • What Trimming is Required to Install a Trailer Hitch on a 2013 Honda CR-Z
    According to the instructions for Curt trailer hitch # C11077 you will need to trim the underbody panels to remove the area where plastic clips attach the panel to the frame rails. I have linked the instructions and also included a picture from them showing the area to trim. If you plan on doing any towing with this hitch keep in mind that the gross trailer weight capacity is 1,000 pounds and the tongue weight capacity is 100 pounds. Consult the owners manual to determine what the tow...
    view full answer...
  • Recommended Way to Tow an Electric Wheelchair with a 2012 Nissan Versa Hatchback or Sedan
    Whether your customer has a Sedan or Hatchback, his maximum tongue weight is 200 pounds. Based on the wheelchair carrier weighing 90 pounds and the power wheelchair at 200 pounds Draw-Tite trailer hitch part # 24798 will not work with the 2012 Nissan Versa. The reason is the tongue weight maximum capacity is 200 pounds and Class I hitches often lack the capacity to carry an electric wheelchair. The hitch mounted accessory does not lack the capacity, it is the vehicle. In your situation...
    view full answer...
  • Ball Mount and Hitch Ball Recommendation for Curt Hitch part # C11072
    With a Class I hitch like the Curt # C11474 that you referenced you want to go with the recommended ball mount by the manufacturer. You would want to use the ball mount part # C45520 and then for a 2 inch ball part # C40018.
    view full answer...
  • Availability of Trailer Hitch for 2015 Ford Focus ST
    The Curt trailer hitch # C11431 is a fit for all ST models. If you want to do a little light towing you will want ball mount # C45520 and pin and clip # F-4. For a 1-7/8 inch ball use # C40001 and for a 2 inch ball use # C40018. All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. The strap you need is sold separately, part # 18050. I attached an install video that shows how it is used.
    view full answer...
  • Parts Needed to Tow a Trailer with a 2006 Audi A3
    I cannot go against the trailer manufacturer and tell you that a class I hitch will be fine when they recommend using a class II hitch but that seems like a rather odd request to me as most other trailer manufacturers do not specify the hitch class so long as the vehicle and hitch are both capable of pulling the weight of the trailer. Therefore, I would think you would be okay but again I can't tell you to do something the trailer manufacturer says not to. Unfortunately the only trailer...
    view full answer...
  • Trailer Hitch that Does Not Require Drilling for a 2000 Toyota Camry
    There are 2 holes that have to be drilled in the bottom of the frame to install Curt trailer hitch # C12339 on your 2000 Toyota Camry. I have included a link to the installation instructions for you so you can see the installation steps. I have also linked a video showing how the hitch installs. All of the Class II trailer hitches for your Camry require drilling. There is one Class I hitch, # 24715, that does not require drilling. I have included a link to its instructions and a video...
    view full answer...
  • Can 2015 Volkswagen Jetta TDI Tow Small Jet Ski Trailer
    This is a hotly debated topic online whether your vehicle can actually tow. It looks like Volkswagen states it cannot tow but in the UK Volkswagen says it's fine so people over here use that as enough proof that it's safe. We have to recommend you stick with what the manufacturer states. Since there is a demand for a hitch on your vehicle our manufacturers did come up with a solution. We have the Curt part # C11410 which is a confirmed fit. For trailer wiring I'd recommend the Tekonsha...
    view full answer...
  • Hitch Installation on 2014 Nissan Versa
    Page 9-16 of the online edition of the owner's manual for the 2014 Nissan Versa says only this about towing a trailer: "Do not tow a trailer with your vehicle". Attaching a hitch such as light-duty Class I hitch # C11256 from Curt will not change the vehicle's capacities. When hitches are made for cars that are not intended to tow this is so that they can use accessory items like bike racks such as # S64650 and cargo carriers such as # C18145. An installation video for this hitch is...
    view full answer...
  • Hitch Recommendation for a 2013 Nissan Leaf Model S
    Yes, the Curt Hitch part # C11396 will fit your 2013 Nissan Leaf S model as this hitch fits all models of the 2013 Nissan Leaf. If you want to do some light duty towing you will want the following parts: The recommended ball mount for this hitch is # C45520. The recommended pin and clip is # F-4. The recommended 1-7/8" hitch ball is # C40001. The recommended 2" hitch ball is # C40018. You will want to consult the owners manual of your vehicle to determine if there are any...
    view full answer...
  • Trailer Hitch and Wiring Harness Fits for 2015 Volkswagen Golf Sportwagen TDI
    We offer a 1-1/4-inch light-duty Class I hitch for your 2015 Volkswagen Golf Sportwagen TDI (as long as it is not the R version), part # C11411 from Curt. Since your intended application is towing all you'll need to add is a ball mount # C45520 and a hitch ball, either 1-7/8-inch # C40001 or 2-inch # C40018. Two helpful hitch installation articles are included for you. In addition to basic hand tools you will need a torque wrench like # ALL944001 to install the hitch to the manufacturer's...
    view full answer...
  • Everything Needed to Tow a Trailer with a 2012 Volkswagen Jetta SportWagen TDI
    I will be happy to help you get everything you will need to tow a trailer and go on the road with your band: except roadies. We are all out of roadies. First, you will need a trailer hitch. I recommend hitch # 24866 with ball mount # 3593. This trailer hitch has a tongue weight capacity of 200 pounds. This is important so I have included a link on how to determine tongue weight for you. The gross trailer weight capacity is 2,000 pounds. The gross trailer weight includes the weight...
    view full answer...
  • Class I Trailer Hitch Installation on 2007 Honda Accord Sedan
    The Curt Class I hitch # C11327 is a confirmed fit on the 2007 Honda Accord Sedan. It also fits the 2-door Coupe for model years 2003 through 2007. It will require some drilling and minor heat shield modification. I have linked an installation video as well as a helpful article to aid your hitch installation. In this hitch you can use Class I accessories like a 2-bike rack such as # S64670 or a cargo carrier like # C18145. If you plan to tow you'll also need a wiring harness # C55502...
    view full answer...
  • Hitch and Bike Rack Recommendation for a 2011 Chevy Camaro Convertible
    First let's start with a hitch for your 2011 Chevy Camaro. For that you would want the Curt Hitch part # C11222 as long as you don't have ground effects. Otherwise there is no hitch solution available. For a ball mount part # C45520. For a 2 inch ball you would want part # 19258 or for a 1-7/8 inch ball part # 19256. The hitch comes with a pin and clip. For trailer wiring you would want the part # 118486. Now when you are carrying a bike rack you will need to use a stabilizer strap...
    view full answer...
  • Trailer Hitch and WIring Recommendations for a 2014 Chevy Sonic Sedan
    Yes, Curt trailer hitch # C11240 will fit your 2014 Chevy Sonic sedan. I have linked a video to the right showing installation of the trailer hitch for you. If you plan on using the hitch for a bike rack or cargo carrier please make sure that the accessory is rated for a Class I trailer hitch. Also, with bike racks or cargo carriers Curt requires the use of stabilization strap # 18050 when using those items or any non-trailer load in the hitch. If you want to tow you will want to...
    view full answer...
  • Ball Mount and Hitch Ball Recommendation for 2006 Chrysler PT Cruiser with Curt Hitch
    With Class I hitches like the Curt part # C45014 that you have for your 2006 Chrysler PT Cruiser you have to use the recommended ball mount from the hitch manufacturer. Which in your case is the Curt # C45520 which has a 3-1/8 inch rise. For hitch balls you'd then want the part # C40018 for a 2 inch ball and # C40001 for a 1-7/8 inch ball.
    view full answer...
  • Difficulty of Installing a Trailer Hitch on a 2012 Audi A3
    Installation of Curt trailer hitch # C11192 on your 2012 Audi A3 requires some drilling, bumper removal, fascia trimming, and removal of spare tire and tail lights. None of this is all that difficult, it just takes time. To determine if this is something you want to tackle you can take a look at the video I have linked showing an installation. I have also linked the instructions for you. You might not need to buy a torque wrench. Most auto parts stores will loan out tools. If you...
    view full answer...
  • Trailer Hitch Recommendation for a 2013 Volvo S80
    At this time there are no Class III trailer hitches available for the 2013 Volvo S80 but the Class II hitches, see link, are all rated high enough for the trailer you plan to tow. You also have to consider the vehicle capacity as indicated in the owners manual. Whichever is lower, the hitch or the vehicle, is the capacity you need to go by. Curt trailer hitch # C12287 has the highest tongue weight capacity of the hitches that will fit. It is rated for 350 pounds tongue weight and 3,500...
    view full answer...
  • Is Ball Mount Included with Trailer Hitch Receiver # C11127?
    The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11127 is a confirmed fit for 2012-2015 Mazda 5 models. It does come with pin and clip, but the ball mount is sold separately. For a ball mount, I recommend the Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs # C45520. You will also want a hitch ball like # C40001 for a 1-7/8 inch or # C40018 for a 2 inch. For your vehicle trailer connection, I recommend the T-One Vehicle Wiring Harness with...
    view full answer...
  • Hitch Recommendation for a 2012 Cadillac CTS Wagon
    For your 2012 Cadillac CTS Wagon the correct hitch you would want is the Curt Hitch part # C11013. This has been confirmed to fit your vehicle so it would work well for you. The # C11013 does include a pin and clip, but you would also need a hitch ball. For a 1-7/8 inch diameter hitch ball, you could use part # 19256, or we also offer part # 19258 if your trailer uses a 2 inch ball. For a ball mount part # C45520. For trailer wiring you would want the part # 119179KIT.
    view full answer...
  • Trailer Hitch Classes Available for a 2003 Buick LeSabre
    All of the trailer hitches available for your 2003 Buick LeSabre are Class II hitches with 1-1/4 inch receivers. Curt hitch # C12044 has the highest tongue weight capacity of the options at 350 pounds. But Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty requirements. All of the hitches are rated for 3,500 pounds gross trailer weight. If you have a 2 inch accessory you want...
    view full answer...

Do you have a question about this Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Installed by:
Cole B
Updated by:
Brian T
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.