1. Trailer Hitch Ball Mount
  2. Curt
  3. Fixed Ball Mount
  4. Fits 1-1/4 Inch Hitch
  5. Drop - None
  6. Rise - 5 Inch
Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs

Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs

lowest price pledge
Our Price: $53.23
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 8 lbs
Quantity: 
Curt Class I,2000 lbs GTW Trailer Hitch Ball Mount - C45025
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Corrosion-resistant ball mount is 11-9/16" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only. Lowest Prices for the best trailer hitch ball mount from Curt. Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs part number C45025 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (66)
  • Q & A (15)
  • Photos
  • Why etrailer?

Curt Trailer Hitch Ball Mount

  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Drop - None
  • Rise - 5 Inch
  • Curt
  • No Ball
  • Class I
  • 2000 lbs GTW
  • Steel Shank

Corrosion-resistant ball mount is 11-9/16" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.


Features:

  • Sturdy, steel construction
  • Corrosion-resistant, black gloss powder coat finish
  • High-quality manufacturing process
    • CNC machined for strong, consistent cuts and welds
    • 7-Stage washing method delivers smooth, clean surface
  • Drawbar can be used in rise position only
  • Hitch pin and clip or hitch lock sold separately
  • Assembled in USA


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Ball hole diameter: 3/4"
  • Length: 11-9/16" from center of hitch pin hole to center of ball hole
  • Rise: 5" from top of inside of hitch opening


D-233 45025 Curt Ball Mount - 1-1/4" - Class I

Item # C45025






Customer Reviews

Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs - C45025

Average Customer Rating:  4.8 out of 5 stars   (66 Customer Reviews)

Corrosion-resistant ball mount is 11-9/16" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.

- C45025
by:

Keeps the trailer nice and level if you do some simple measuring. Took a bright yellow paint stick and wrote on it "CHAINS" so my son and I don't forget to hook up the safety chains. 867958



- C45025
by:

858977



- C45025
by:

858685



- C45025
by:

This product is as advertised. Unfortunately I had to order it as a replacement for the draw bar I originally ordered because the original didn't have enough length to sufficiently clear the bumper. This draw bar clears the bumper with space to spare, and was the only option we could find with both the length and rise to fit my Mazda. Overall I am satisfied to have found a draw bar that would work for me, even if it took two tries. 825279



- C45025
by:

Excellent Product just as described. It fits perfectly on my Toyota Corolla 2010. Perfect to Tow my jet ski. 804233



- C45025
by:

I bought this hitch with the reciever for pulling my jon boat with my car . The 5 inch rise worked perfect for my . It seems strong and sturdy for what I am using it for . Perfect for pulling smaller trailers with a car. 800143



- C45025
by:

Made well , But very loose fit , there's a ton of play when inserted into the hitch , I could understand if it was two different makers, but there both Curtis products !! 786559


Comments
There are tolerances for both the hitch receiver and the ball mount, so there often is some play between the hitch receiver and accessories. An anti-rattle device like the Roadmaster Quiet Hitch # RM-061-125 is a great option to keep your ball mount tight inside your hitch receiver.
-- Victoria B - 04/29/2020

75424

- C45025
by:

Great quality and price. Free shipping was really quick. 786024



- C45025
by:

The Curt Class I Drawbar - 5" Rise - 11-9/16" Long is perfect for my 2013 Kia Soul. I needed the rise to level my boat trailer and the length got it back away from back of kia soul. Very nice drawbar.Kia soul tows my 14 ft boat very well with this setup. Etrailer is great to help you get the right parts,and very quick getting them to you 783976



- C45025
by:

Excellent product. 765760



- C45025
by:

I was surprised as to how heavy duty this item was/is. Perfect match for a great hitch. 746581



- C45025
by:

Top quality and excellent videos. 745320



- C45025
by:

Product is as described. Have yet to use but expect it to function as expected. Wish there was a larger rise available. 5 inches is just barely what I need. Also wish there was an adjustable 1.25 product liker there is with the 2.0 inch products. It would have been nice if the product was packaged better. There was no padding in the box and the product broke through the box most likely because of product weight and mishandling by the common carrier. Luckily it did not fall out completely. 726838



- C45025
by:

Etrailer was the only place I could find this particular hitch. As always quick delivery of good products. 680503



- C45025
by:

I just can't believe my order was here the next day. I ordered it in the late afternoon on Monday and it was here Tuesday before 3:00. I was in disbelief but ecstatic. It was exactly what I ordered. I built a tiny sleeper and am getting it ready to take camping. I will take pictures after i install the receiver, ball, and pin. I was worried I wouldnt get it before the weekend. Thank you etrailer. This was the 2nd time I've ordered from your company and I definately won't hesitate to order from you in the future and I will highly recommend you to my friends and colleagues. 662880



- C45025
by:

Looks great and fits perfectly on my 2015 Sonata Sport 644187



- C45025
by:

Use this on my Subaru Impreza to pull my thousand pound boat work great 643291



- C45025
by:

Great seller; thank you! 625336



- C45025
by:

Works great for our track car. We tow a small trailer with wheels and tools. 619608



- C45025
by:

The product was exactly what I needed; but more importantly, the help that I received from Madison during the ordering process was fantastic. She helped fill in the gaps of missing information that I had been provided by the trailer rental place who installed the hitch. Thank you again for your great customer service! 589536



- C45025
by:

hard to find 1 1/4 drawbars but ETRAILER has what nobody else has. Thanks 574998



- C45025
by:

Gave me the lift I needed to pull a kayak trailer. Solid piece. 525326



- C45025
by:

This unit was used on a trike to clear the back end and correctly position at the ball height for a tent trailer. It was excellent! Great quality and delivered as advertised. 502817


Comments
This hitch has performed flawlessly.
Franklin H - 05/05/2019

54892

- C45025
by:

Great product at great price and fast s hiping 473810



- C45025
by:

Stays off the ground, despite the low level of by VW Beetle. With the appropriate ball, purchased from Uhaul, I've been able to drive across Florida hauling a trailer behind my tiny car. 456861


25
66
Show More Reviews

Ask the Experts about this Curt Trailer Hitch Ball Mount

  • Ball Mount Recommendation for a 2016 Toyota Corolla with Hidden Hitch
    When picking out a ball mount for a Class I hitch like the part # 60345 you have to go with the ball mount that is recommended for the hitch. If the one that came with this hitch doesn't have the right rise there's nothing I can safely recommend since Draw Tite states that the use of any other ball mount will void the warranty. You will have to use the part # 3593 that came with the hitch in the rise position. This will give you 2-1/8 inches of rise. For a 2 inch ball you would need...
    view full answer...
  • Ball Mount and Trailer Wiring for a 2016 Toyota Corolla with Hidden Hitch Class I Trailer Hitch
    Since you have a Hidden Hitch Class I trailer hitch on your 2016 Toyota Corolla you will need to use a Class I ball mount. Also you have to use the ball mount specified by the hitch manufacturer otherwise it will void the hitch warranty. The correct ball mount for this hitch and vehicle is # 3593 and it must be used in the rise position only. It comes with a hitch pin and clip. For a 1-7/8 inch ball I recommend # 19256 and for a 2 inch I recommend # 19258. And for trailer wiring...
    view full answer...
  • What is the Correct Ball Mount for Curt Trailer Hitch C11227 on a 1994 Toyota Celica ST
    This is actually a lot easier to determine than you might think. With any Class I or II trailer hitch you will need to use the ball mount recommended in the hitch instructions. The use of any other ball mount can result in voiding the hitch warranty. The reason is that on Class I and II hitches the ball mount recommended has been tested for and approved for use as the best option for those hitch and vehicle combinations. For trailer hitch # C11227 the recommended ball mount is # C45503....
    view full answer...
  • Correct Draw Bar for Curt Class I Receiver C45025 on 2012 VW Golf TDI
    The draw bar included with the hitch is part # C45016, which has a 2-5/8 inch rise, or 3-1/4 inch drop. Ideally, you want to tow the trailer so that it is as level as possible, but being within an inch and a half either way is close enough for government work. Keep in mind that hitch is designed to work best with a draw bar with the same drop as the C45016, and using a draw bar with a different rise or drop is not recommended. I will link you to our FAQ article that shows how to...
    view full answer...
  • Selecting Ball Mount for Yakima Trailer with 22" Coupler Height and Ford Focus with 10" Hitch Height
    If you measured a distance of 10 inches from the ground to the top of the inside of the Draw-Tite # 24872 hitch receiver on your 2015 Ford Focus, the Curt Drawbar # C45028 is going to put the ball platform at 15-3/8" above the ground. With the hitch ball actually in place you are looking at a ball height of around 17-3/8", which is still quite below the ideal 22" ball height for the Yakima trailers such as the Rack and Roll # Y08107. With this setup the Yakima trailer is going to be...
    view full answer...
  • Parts Needed to Tow a Trailer with a 2014 Toyota Prius 4
    As far as whether or not you can tow a trailer with your 2014 Toyota Prius you will need to check the owners manual or with a Toyota dealer for the final say on that. Our understanding is that Toyota says that you cannot tow at all with your vehicle. With that said, we have seen instances where people will do this anyways and parts are available to do so. For a hitch you can use the Curt # C11276, which is a confirmed fit on the 2014 Toyota Prius. For the wiring I recommend using the...
    view full answer...
  • Will a Class II Drawbar Fit Into the Class I Curt Hitch # C11080
    Curt states that Drawbar, # C45522, is the ball mount designed for use with Curt Trailer Hitch Receiver, # C11080. Although the Curt Drawbar, # C45025, will most likely fit in your hitch, it was not designed for use with this particular hitch. If failure occurs when using this drawbar, Curt may void any warranty on the hitch. As for using a Class II drawbar in a Class I trailer hitch, most Class I trailer hitches have a stop built into them so a Class II drawbar can not be used....
    view full answer...
  • Determining Which Drop/Rise Ball Mount will be Needed to Transport my Coleman Popup Camper
    I can help you figure out what which ball mount you will need for your Mazda and Coleman popup camper. There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that...
    view full answer...
  • Available Drawbars for 1-1/4 Inch Hitches with at Least a 5-inch Rise in the Shank
    The Curt bar # C45028 (5-3/8 inch rise or 6-inch drop) you referenced is one of 3 Curt drawbars we currently offer that will have a 5 inch or more rise in the shank. The reason other shanks may have a different rise is because it may have a different Class rating. I also pulled this drawbar from our warehouse and made a short video and diagram for you. Please note you can only use Class-I rated crossbars because your 1998 Volkswagen Cabrio only works with Class-I hitches. The two...
    view full answer...
  • Ball Mount Recommendation for Class I Draw-Tite Trailer Hitch on a 2005 Honda Accord Coupe
    Take a look at the picture I have included. If the receiver on the Draw-Tite trailer hitch # 24787 on your 2005 Honda Accord has that tab behind the hitch pin hole then the Class II ball mount # C45014 will not fit. But you can use # C45025 which has the same rise and is Class I compatible. Clearing the rear bumper should not be an issue. Ball mount # C45025 measures 11-1/4 inches long from the center of the hitch pin hole to the center of the ball hole. For a compatible 1-7/8 inch ball...
    view full answer...
  • Can Curt Class II Ball Mount # C45014 Be Used With Class I Hitch on 2002 Volkswagen Passat
    All hitches offered for your 2002 Volkswagen Passat are of the Class I type and can only be used with compatible Class I accessories. Although the ball mount # C45014 from Curt is also a 1-1/4-inch size it is a Class II ball mount and will not work in your hitch. We do offer two Class I ball mounts with the same 5-inch rise as the part you referenced. These will work in your hitch. You can see both on the link provided; two lengths are available, including the 9-9/16-inch long # C45024...
    view full answer...
  • How to Determine the Rise/Drop of Class I Ball Mounts
    There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that of the receiver, you'll need a ball mount with a rise. If the coupler height is smaller than that of the...
    view full answer...
  • Recommended Trailer Hitch And Wiring For 2004 Chrysler PT Cruiser
    The trailer wiring is not included with a trailer hitch for your 2004 PT Cruiser. We do offer them separately. There is no drilling required for the installation of the Curt Trailer Hitch, part # C11132. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I have attached a link to an installation video for this hitch on a PT Cruiser you can check out. As the video shows, the trailer hitch uses the tow hook mounting locations on the vehicle frame after they have been removed. The...
    view full answer...
  • Availability of a Long 1-1/4 inch Ball Mount
    The longest Class I ball mount we offer is the Curt Ball Mount part # C45025 which is 11-6/16 inches long. If you could use a Class II ball mount (also 1-1/4 inch) you could use the Curt Class II Draw Bar part # C45000 that measures 13-1/2 inches from the pin hole to the ball hole.
    view full answer...
  • 2 inch Hitch Ball Recommendation to Use with Ball Mounts 3593 and C45025
    For a 2 inch ball to use with the draw bar part # 3593 you would want the part # 19258. For the part # C45025 you would then want the part # C40018. Both balls have 3/4 inch diameter shanks.
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Installed by:
Brandon M
Installed by:
Cole B
Updated by:
Kristina F
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.