Curt Class I Drawbar - 4" Rise - 9" Long - 2,000 lbs

Curt Class I Drawbar - 4" Rise - 9" Long - 2,000 lbs

Item # C45021

lowest price pledge

Retail:$26.34

Our Price: $22.93

You Save: 13%
Ball Mounts

Orders above $99 qualify for Free Shipping

Shipping Weight: 6 lbs

Quantity: 
In Stock, Ships Today
C45021 - Drop - None,Rise - 4 Inch Curt Fixed Ball Mount
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Class I
  • 2000 lbs GTW
  • Drop - None
  • Rise - 4 Inch
  • Curt
  • No Ball
  • Steel Shank
Corrosion-resistant ball mount is 9" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only. Call 800-298-8924 to order Curt ball mounts part number C45021 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for Curt Class I Drawbar - 4" Rise - 9" Long - 2,000 lbs. Ball Mounts reviews from real customers.


  • All Info
  • Reviews (11)
  • Q & A (6)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Ball Mounts - C45021

Corrosion-resistant ball mount is 9" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.


Features:

  • Sturdy, steel construction
  • Corrosion-resistant, black gloss powder coat finish
  • High-quality manufacturing process
    • CNC machined for strong, consistent cuts and welds
    • 7-Stage washing method delivers smooth, clean surface
  • Drawbar can be used in rise position only
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Ball hole diameter: 3/4"
  • Length: 9" from center of hitch pin hole to center of ball hole
  • Rise: 4" from top of inside of hitch opening to top of ball platform


45021 Curt Ball Mount - 1-1/4" - Class I

Replaces D-229






Video of Curt Class I Drawbar - 4" Rise - 9" Long - 2,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Ball Mounts - Fixed Ball Mount - C45021 Review


Customer Reviews

Curt Class I Drawbar - 4" Rise - 9" Long - 2,000 lbs - C45021

Average Customer Rating:  4.9 out of 5 stars   (11 Customer Reviews)

Corrosion-resistant ball mount is 9" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.

- C45021

by:


Very well made with an attractive finish. I'm sure it will give me years of good service. I was also impressed with how fast (2 days) I received the order. Thanks for the excellent service. 227060



- C45021

by:


Bought two hitch mounts and a tie-down strap. Quality of all is outstanding but, even better, the service was fantastic. The three items arrived 2 days after I ordered them. I did not have to pay anything for shipping. Before ordering them I asked a couple online questions and the answers came quickly, within a couple hours. Highly recommend etrailer.com. 458678



- C45021

by:


I ordered a similar drawbar with a 5" rise a few weeks ago, but found that my trailer seemed a tad too high with it. So I ordered this 4" alternative, and —as Goldilocks would say— it is "just right." I would recommend that customers who use etrailer's recommended calculations (measuring the difference between the inside top of the receiver opening to the bottom of the trailer's coupler when level) should then subtract 1" from the result. Why? Because the base of the ball raises the coupler 1" higher than the top of the drawbar. Other than that miscalculation, these drawbars are rock solid, top quality, more than adequate, reasonably priced. 559868


Comments

Theres actually two reasons why we dont mention subtracting an addition inch. 1 The rear of the vehicle will sag by a certain amount generally an inch or so when the trailer is hitched up and 2 The trailer doesnt need to be exactly level. As long as youre within an inch or two, youll be just fine.

-- Mike L - 08/30/2018

43009

- C45021

by:


Just wanted to let you know that the trailer hitch is all installed and works great. 340480


Comments

The products are great, we are still happy with them.

Tedy - 02/10/2018

34513

- C45021

by:


Excellent product, gave me the additional height I needed for my UTV hitch. 593444



- C45021

by:


Just as Ahern said it was. Very easy to buy from etrailer.com 399087


Comments

Perfect! Does everything I expected

Bill W - 06/26/2018

40208

- C45021

by:


As usual etrailer came through again for me. Great web site, with a good description on the product. This enabled me to get exactly what I was seeking. Ordered on Tuesday and received on Friday. Thanks guys! 307248



- C45021

by:


I am very pleased with this product. 302304



- C45021

by:


The product was easy to install by watching an installation video on you tube. The product was shipped very quickly. I procrastinated, waiting until two days before my family was to leave on vacation. I noticed that a piece was missing while installing the hitch. The customer service went out of their way to insure that I received the required piece before we left on vacation by finding the closest warehouse to me, and having the piece shipped overnight. They saved me from having to cancel the family vacation and disappointing the family. The hitch was just as described, and well as the installation, and the customer support was of the highest caliber. Mont M. from Hubbard Ohio. 206708



- C45021

by:


Fit my cobalt perfect very happy 182117



- C45021

by:


Exactly what I needed. Easy to order and delivered a day early. 74308


12
12

Ask the Experts about this Curt Ball Mounts
Do you have a question about this Ball Mount?


  • Determining Which Drop/Rise Ball Mount will be Needed to Transport my Coleman Popup Camper
  • I can help you figure out what which ball mount you will need for your Mazda and Coleman popup camper. There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that...
    view full answer...

  • Drawbar Will Not Fit Trailer Hitch On 2004 John Deere Buck ATV
  • The problem you probably are facing is that you have to use a Class l ball mount in the hitch receiver on your John Deere ATV. The shank on a Class ll ball mount is inserted in the receiver more than on a 1-1/4 inch receiver and the holes will not line up. I went to the warehouse and measured the Curt Class l Drawbar, part # C45021. The distance from the end of the shank that goes in the receiver to the center of the hitch pin hole is 1-1/2 inches. This drawbar has a 4-inch rise and...
    view full answer...

  • Class I Ball Mount to Allow for Total Hitch Ball Height of 17-Inches on 2014 BMW 428i
  • When we installed the Curt Class I hitch # C11367 on a 2014 BMW 4-Series coupe we found that the height of receiver opening was 11-inches above ground level. This is shown in both the linked photo and installation video. Since there are two stock tires sizes offered on the car, P225/50-17 and P255/40-18, the actual height of your vehicle could differ from the one in the video. The recommended Curt Ball Mount is part # C45521 which has 2-5/8-inches of rise and can be used with a ball...
    view full answer...

  • Could Curt Ball Mount # C45021 Tow Camper that Weighs 1,395 lb
  • The Curt ball mount part # C45021 that you mentioned would have the capacity needed for your camper that weighs 1,395 lbs as it's rated for up to 2,000 lbs but you'll want to make sure this ball mount will provide you with the correct rise/drop that your trailer needs. This ball mount provides 4 inches of rise. I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will...
    view full answer...

  • 1-1/4" Ball Mount Needed with a 4" Rise
  • Although we do not have any adapters that change a 1-1/4" ball mount to a 1" ball mount, we do have a wide selection of ball mounts that you can choose from. Among the linked selection we have the Curt Class I Drawbar # C45021 which has a 4" Rise, is 9" Long, and is rated for 200 lbs Tongue Weight (TW). This is compatible with any hitch ball that has a 3/4" shank like the 1-7/8" Hitch Ball # A-80 or the 2" Hitch Ball # A-82. I have also attached a link to our helpful article on...
    view full answer...

  • Can Two 68 Pound Kayaks be Carried on the Roof of a 2016 Ford Fusion
  • Rola Rail Extreme DFE Series Roof Rack # R5004 is rated for 110 pounds so it will not be the best option for your 2016 Ford Fusion and two 68 pound kayaks. The bars themselves are rated higher but the mounting feet in this roof rack is limited to 110 pounds. I do have a solution for you but none of the available roof racks for your Fusion are rated higher enough. The only remaining option is to use what is called a roof rack on wheels. This is basically a trailer with a roof rack on...
    view full answer...


Do you have a question about this Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Written by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Cole B
Expert Research:
Jeffrey L
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204 Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570 Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511 Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+ Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
73 Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357 Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.