B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black

Item # BWTS10038B

lowest price pledge

Retail:$240.00

Our Price: $225.00

You Save: $15.00
Ball Mounts

This item qualifies for Free Shipping

Shipping Weight: 28 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball. Call 800-298-8924 to order B and W ball mounts part number BWTS10038B or order online at etrailer.com. Free expert support on all B and W products. Guaranteed Lowest Price and Fastest Shipping for B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black. Ball Mounts reviews from real customers.
  • All Info
  • Reviews (7)
  • Q & A (98)
  • Videos (2)
  • Photos
  • Why etrailer?

B and W Ball Mounts - BWTS10038B

  • Adjustable Ball Mount
  • Fits 2 Inch Hitch
  • Class IV
  • 7500 lbs GTW
  • Drop - 5 Inch
  • Rise - 5 Inch
  • B and W
  • Two Balls
  • Steel Shank
  • Steel Ball

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball.


Features:

  • Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver
    • Ball provides connection point for trailer coupler
  • Stowable design lets you store ball and mounting platform underneath your vehicle
    • Remove pins holding ball mount platform in place on shank
    • Flip platform underneath the hitch
    • Reinsert pins and clips to secure ball mount platform for travel
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Slide ball mount up or down along shank and secure in place with included pins and clips
  • Anti-theft design ensures ball mount platform can't be removed when Tow & Stow is installed in hitch
    • No additional locks required to prevent platform and balls from being removed
  • 2 Different-size hitch balls let you tow trailers with different coupler sizes
    • To switch ball, simply remove pin, rotate balls, and reinsert pin
  • Dual-process chrome plating on balls provides excellent rust resistance
  • Black powder coated shank is corrosion resistant
  • Stainless steel pins create sturdy, rust-resistant connections
  • Durable steel construction with high yield tubing offers superior strength
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight:
    • When used with 1-7/8" ball: 3,500 lbs
    • When used with 2" ball: 7,500 lbs
  • Distance from center of hitch pin hole to center of hitch ball:
    • Hitch pin hole closest to ball: 9-1/4"
    • Hitch pin hole farthest from ball: 10-3/8"
  • Distance from center of hitch pin hole to pin hole in mounting block:
    • Pin hole closest to mounting block: 3-3/4"
    • Pin hole farthest from mounting block: 4-7/8"
  • Maximum drop: 5"
  • Maximum rise: 5-1/2"
  • Incremental height adjustment: 1"
  • Limited lifetime warranty


The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.


Easily Adjusts and Stows

B&W Tow & Stow Ball Mount Operation

To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place.


Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.


When you're not towing, you can flip the ball mount platform around and stow it beneath your hitch so that you won't bang your shins. Just remove the pins to slide the ball platform down along the channel and up the back side so that the hitch balls face towards your vehicle. Then replace the pins.


Built-In Anti-Theft System

The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer.


Single Dimensions

A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.


When the Tow & Stow is secured in your hitch receiver, you will not be able to remove the ball mount platform. This is because the slot in the shank is positioned in such a way that the collar on your hitch will block the pin on the platform from being able to leave the channel. Even if the pins holding the ball mount platform in place are removed, the platform will still be confined to this channel. So, as long as a hitch lock is used to secure the entire ball mount in your hitch receiver, and a coupler lock is used to prevent your trailer's coupler from being disengaged from the ball, your trailer will be secure.




TS10038B B and W Stow and Tow Dual Ball Mount - Model 8 - 1-7/8" Ball and 2" Ball - Black






California residents: click here


Video of B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for B&W Tow and Stow 2 Ball Mount Review

Today we'll be taking a look at the B&W Tow and Stow 2 Ball Mounts for 2" Hitches available in a variety of different drops and rises, with a 7,500 or a 10,000 pound towing capacity. This tow and stow ball mount stows up and out of the way when not in use and is easily returned to its towing position by pulling these two clips here, removing the pins, as you can see it slides down the shank without having to remove it and back around. We'll replace the pins and the clips and then we can rotate our ball by pulling this clip here, removing the pin. We've got a choice between 2" and 2-5/16". We'll simply rotate it, put the pin in the front hole, replace our clip and then we're ready to tow. All of the ball mounts feature a drop and a rise, adjustable in 1" increments allowing you to tow trailers of different heights with the same vehicle. The shank has a nice black powder coat finish while the dual hitch balls feature a chrome plating. Both are going to be excellent at resisting rust and corrosion.

It features a durable steel construction with a high-yield tubing for superior strength. With the 10,000 pound rated tow and stow you can tow up to 10,000 pounds with the 2-5/16" ball and 7,500 pounds with the 2" ball. With the 7,500 pound rated tow and stow you can tow up to 7,500 pounds with the 2-5/16" ball and 3,500 pounds with the 2" ball. From the center of the furthest hitch pin hole to the center of the ball, measures 10-1/4". Form the center of the closest hole to the center of the center of the hitch ball, it measures 9-1/4". All of the B&W tow and stow ball mounts feature a limited lifetime warranty. Now let's go ahead and hook it up to our trailer and show you what it looks like in action. That's going to complete our look at the B&W Tow and Stow Ball Mounts for 2" Hitches.

.


Customer Reviews

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black - BWTS10038B

Average Customer Rating:  5.0 out of 5 stars   (7 Customer Reviews)

Easily stow the ball and mounting platform on this heavy-duty, dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Tow up to 3,500 lbs with the 1-7/8" ball or 7,500 lbs with the 2" ball.

- BWTS10038B
by:

Couldn't be happier with my new hitch. Excellent quality, exactly as advertised. The video explaining the characteristics and operation of the hitch was extremely helpful and answered all my concerns. I now only need one hitch for all 5 of my trailers. This was my 2nd purchase from etrailer and I highly recommend them. 334070


Comments

After 1 year I couldn’t be happier with my ball hitch. I recommend this hitch to anyone that pulls multiple trailers.

Brad U - 01/20/2018

33422

- BWTS10038B
by:

Good price, quick shipping, fits great! 538640



- BWTS10038B
by:

B&W makes a top of the line product, this is the third B&W I have owned. I wouldn’t settle for anything less. Well worth the money. Very versatile, does everything I need it to. I have two boats, the transition is effortless depending on what we are doing at the lake I hope it will be the last one I own. Thanks 517704



- BWTS10038B
by:

Bought this for my husband. He LOVES it! Constructed well, easy to operate. Great product 496912


Comments

We love the hitch!

Michele - 04/16/2019

52988

- BWTS10038B
by:

excellent product ball is showing signs of surface rust after going threw one winter not to bad. love the adjustibility of it. On my 07 silverado with factory receiver it is possible to still remove the ball on the back slot 473462



- BWTS10038B
by:

The stow & go hitch is very well made with good material. It is the first B&W hitch I have ever used and I just love it. It is easy to adjust and solid when hooked up. 227723



- BWTS10038B
by:

Best hitch ,fast shipping and excellent service 214291


7
7

Ask the Experts about this B and W Ball Mounts

Do you have a question about this Ball Mount?


  • Recommended Trailer Hitch Receiver, 7-Way Trailer Connector, and Brake Controller on 2017 Tacoma
  • Sounds like you're trying to build your own tow package on your new 2017 Toyota Tacoma. We can certainly help you with that. We'll begin with the hitch receiver. I suggest the Draw-Tite # 75238. It's a Class III, 2 inch hitch with a gross trailer weight of 7,000 pounds and maximum tongue weight of 1,50 pounds. Higher than a lot of Class III hitches. It's a fairly straight forward installation because it bolts right to your truck's frame. For a wiring harness to get power to your...
    view full answer...

  • Recommended Trailer Hitch Receiver for 2017 Ford Explorer with Hands Free Lift Gate Sensor
  • Both the Draw-Tite # 76034 and Curt # C13386 trailer hitch receivers that are designed for your 2017 Ford Explorer will allow the hands free lift gate sensor to work. However, you will need to activate it by putting your foot to the side of the hitch receiver opening with both hitches. The sensors will not recognize your foot through the hitch unfortunately. I've linked videos of both hitches being installed for you. If you're going to be towing a trailer with the Explorer and need...
    view full answer...

  • Parts Needed to Tow a Trailer with a 2017 Ford Transit T150 Van
  • For your 2017 Ford Transit T150 I suggest the Draw-Tite # 75912. This is a 2 inch, Class III trailer hitch receiver confirmed to fit your van. All of the hardware is included and no drilling is required for installation. If your Transit does not have the factory tow package you can use # 118643 for a 4-way trailer connector or # 22114 for a 7-way. They both install by plugging in behind the tail lights. Use # C55774 for both a 4-way and 7-way in one part if the Transit has the...
    view full answer...

  • Recommended Aftermarket Towing Products that Won't Void Vehicle Warranty on 2017 Kia Niro
  • Adding a trailer hitch receiver like the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13329 that bolts on to the frame of your 2017 Kia Niro will not void your warranty from Kia. You are covered under federal law. Consumers of aftermarket products are protected by the Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have...
    view full answer...

  • Comparison of Wiring Harnesses to Fit 2011 Jeep Liberty and Other Parts Needed to Tow a Trailer
  • There are three trailer wiring harnesses that fit the 2011 Jeep Liberty. The Tekonsha # 118554, Curt # C56334, and a Hopkins # HM11142485. All three provide a 4-way connector and install by plugging in behind both tail lights. There is also a hot lead wire that will be run to the battery and a fuse to be installed. Everything for the install is included with each harness. Then the connector will is stowed beneath the Jeep near the trailer hitch. Of the three I recommend the Tekonsha...
    view full answer...

  • Will Parking and Rear Hatch Sensors Work After Installing Draw-Tite Hitch Receiver on 2017 BMW X3
  • When installing the Draw-Tite Trailer Hitch Receiver # 76226 on your 2017 BMW X3 the parking sensors will not be impacted. However, the hands free rear hatch feature could be impacted. It depends on the location of the sensor for the kick feature in your BMW. It's possible the sensor can be relocated so the hitch will not interfere. If you plan to tow a trailer with the X3 the wiring harness I recommend is the Tekonsha # 119190KIT. I've linked a video of the harness being installed...
    view full answer...

  • Recommended Trailer Hitch Receiver for 2013 Audi Q7
  • For your 2013 Audi Q7, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75950 over the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13220 because it requires a stability strap # 18050 for any non-trailer loads like bike racks and cargo carriers. The attached installation details do not state trimming is required for your model vehicle. If you will be towing or using a lighted accessory, I recommend the Curt Powered Tail Light...
    view full answer...

  • Parts Needed to Tow a Trailer with a 2017 Nissan Rogue Hybrid
  • I verified with Curt that their trailer hitch receiver # C13204 and wiring harness # C56033 will both fit on your 2017 Nissan Rogue Hybrid. I've linked videos of both being installed on Rogues, although not hybrid models. The install process is the same. Since you're going to be towing a trailer with the Rogue you'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the...
    view full answer...

  • Trailer Hitch Receiver Confirmed to Fit a 2018 Subaru Outback
  • I did reach out to Torklift and confirmed that the Ecohitch # 306-X7266 fits the 2018 Subaru Outback Wagon. If you also need a wiring harness to power a trailer's lights the Tekonsha # 118467 is a fit. This gives you a 4-way trailer connector at the rear of the Outback. You'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once...
    view full answer...

  • Recommended Trailer Hitch for 2018 Kia Sportage
  • Yes. The Curt Trailer Hitch Receiver # C13281 is a confirmed fit for your 2018 Kia Sportage SX. It is a confirmed fit for all trim models. I've attached a video of this installation for you. If you will be using this hitch for an accessory like a bike rack, Curt's warranty also requires the support strap # 18050. If you will be towing with this hitch, I recommend the wiring harness # 118698. This T-One connector will mate with your factory harness behind the tail lights on...
    view full answer...

  • Recommended Trailer Hitch for 2018 Chrysler Pacifica Hybrid
  • The Curt Trailer Hitch Receiver # C13383 is a confirmed fit for a 2018 Chrysler Pacifica Hybrid. If you will be using the hitch for accessories like a bike rack, you will also need stabilizer strap # 18050 for the manufacturer's warranty. If you will be towing with this hitch, I recommend the Upgraded Circuit Protected ModuLite with 4 Pole Harness and Hardwire Kit - Includes Tester # 119179KIT. This kit will allow you to easily splice into your factory wiring using quick-splice connections...
    view full answer...

  • Parts Needed to Tow a Trailer with a 2010 Mitsubishi Outlander
  • If you haven't already check the owner's manual of your 2010 Mitsubishi Outlander and make sure you have the towing capacity to handle a 2,200 pound trailer. From my research the 2.4L Outlander has a maximum towing capacity of 1,500 pounds and that's if the trailer has brakes. If you find you can indeed tow the trailer the best trailer hitch receiver for your Outlander is the Draw-Tite # 75555. It's custom made for your vehicle and bolts right onto the frame. The wiring harness...
    view full answer...

  • Wiring Harness Compatible with 2017 Mazda CX-5 That has LED Lights
  • Yes, the Tekonsha wiring harness # 119147KIT will work with the LED lights on your 2017 Mazda CX-5. I've linked a video of the install process for you. If you don't already have a trailer hitch receiver I suggest the Draw-Tite # 76138. It's a 2 inch, Class III hitch receiver which will give you more capacity and variety when it comes to towing or carrying accessories on the hitch. To tow a trailer you'll also need a ball mount and hitch ball. I've attached link of our selection...
    view full answer...

  • Towing Capacity And Recommended Components For 2013 Mercedes-Benz GLK-250 BlueTEC
  • For your 2013 Mercedes-Benz GLK-250 BlueTEC, we don't have a 1-1/4 inch hitch receiver as a confirmed fit so I can't give you the manufacturer specs on that hitch. We do have a 2 inch trailer hitch receiver confirmed to fit. It is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13155. This receiver is rated for 3500 lbs towing and 350 lbs tongue weight max. It is not able to be used with weight distributions systems. The manufacturer puts your max towing capacity at...
    view full answer...

  • Installing a 7-Way Trailer Connector and Other Parts to Tow a Trailer with a 2017 Kia Sorento
  • To install a 7-way trailer connector on the back of your 2017 Kia Sorento you'll first need a 4-way connector. Use # 118583 which installs by plugging in behind the Kia's tail lights. If your trailer does not have brakes you can use the 4-way with # 37185 and just cap off the wires you don't need. If your trailer has brakes once you have the 4-way installed use our # ETBC7 kit to install the 7-way. This will also include everything you need for the electric brake controller. For...
    view full answer...

  • Parts Needed to Tow a Trailer with a 2017 Dodge Journey
  • The trailer hitch receiver I suggest for your 2017 Dodge Journey is the Draw-Tite # 75648. It's a Class III, 2 inch hitch which will give you more towing capacity and more options for accessories. If you're going to be towing with the Journey for a 4-way trailer harness you can use # 118536 if it has LED lights. If it has incandescent lights use # 118567. Both install by plugging into connectors behind the tail lights. You'll also need a ball mount and hitch ball. I've attached...
    view full answer...

  • Which Draw-Tite Trailer Hitch Receiver Fits a 2013 Ford Edge SEL with Dual Exhaust
  • The Draw-Tite Trailer Hitch Receiver # 75728 is for the Ford Edge Sport and will not fit your 2013 Ford Edge SEL. On you SEL model instead you need Draw-Tite # 75992. It is designed to fit models with dual exhaust. I've attached a picture of the hitch on an SEL with dual exhaust that I found in the install details. I've also linked the install details and an install video for you. If you're going to be towing with your Edge the wiring harness to fit is # 118515. It plugs into...
    view full answer...

  • Recommended Trailer Hitch Receiver and Wiring Harness for 2018 Honda CR-V
  • Well, thank your nephew for us. We do installations on all our products for customers here in Wentzville near O'Fallon. The Draw-Tite Max-Frame Trailer Hitch Receiver # 76128 is the best option in my opinion for your 2018 Honda CR-V. It is rated for a stronger capacity than the Curt option # C13397 and is a slightly easier install as well with no fascia trimming required. For your trailer wiring, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector...
    view full answer...

  • Will Spare Fit With Trailer Hitch Receiver Installed on a 2017 Hyundai Santa Fe Sport 2.0t Ultimate
  • Both the Draw-Tite # 75772 and Curt # C13152 trailer hitch receivers for your 2017 Hyundai Santa Fe Sport require the spare tire to be temporarily removed for installation. Once installed the hitches fit with the spare tire. If you look at the videos I've attached the spare tire is put back in place and that is the 2017 Sport 2.0t Ultimate like yours. Between the two hitches I recommend the Curt because of the higher weight capacity. If you're going to be towing with your Hyundai...
    view full answer...

  • Recommended Trailer Hitch Receiver and Other Parts for Towing a Trailer with a 2004 Ford Ranger
  • Hidden Hitch has actually been discontinued completely. They were purchased some time ago by the same parent company as Draw-Tite. If there are any still floating around it's because they haven't run out yet. However, we no longer carry the 70181. Instead for your 2004 Ford Ranger I recommend the Curt # 13138. It has similar specs and look to the 70181. I've attached a video of it being installed on a 2006 Ranger. If you're going to be towing a trailer with the Ranger you'll also...
    view full answer...

  • Trailer Wiring Harness and Other Parts to Tow a Trailer with a 2017 Chevrolet Traverse with Rear AC
  • From what we have found all the Chevrolet Traverse models from 2017 like yours have the factory tow package connector under the vehicle near the frame rail on the passenger's side even if it doesn't have the tow package. I've attached a picture that shows the connector you need to find. If your Traverse does have this connector you can use # 118270 for a 4-way trailer connector. This also includes the fuses and relays you'll need to install to activate the tow package. I've linked a...
    view full answer...

  • Recommended Trailer Hitch Receiver and Other Parts to Tow a with a 2017 Hyundai Santa Fe Sport
  • The Curt # C13152 and Draw-Tite # 75772 trailer hitch receivers that fit your 2017 Hyundai Santa Fe Sport are both pretty much the same. They install in the same location and even have the same clearance. The weight capacity of the Curt is higher but in all reality they're both rated as high as your Santa Fe so the higher capacity doesn't really matter. The Draw-Tite does have a slightly better price tag so, if it were me, I'd go with it. For a wiring harness I recommend going with...
    view full answer...

  • Will Trailer Hitch Receiver Interfere with Hands Free Lift Gate Feature on a 2017 Honda CR-V
  • We have tested this ourselves and heard back from customers that when they install a trailer hitch receiver, like the Draw-Tite # 76128, on a 2017 Honda CR-V they've had no problem operating the hands free lift gate. If you're going to be towing a trailer the wiring harness to power the trailer's lights I recommend is the Tekonsha # 118741. This installs pretty easier by plugging in to a connector in the rear cargo area behind a trim panel on the driver's side. There's also a fuse...
    view full answer...

  • Wiring Harness for LED Lights and Other Parts Needed to Tow a Trailer with a Mercedes-Benz R320 CDi
  • Yes, the ZCI Wiring Harness # 119250KIT will work with LED lights and is a great choice for your 2008 Mercedes-Benz R320 CDi. If you don't already have a trailer hitch receiver I suggest the Draw-Tite # 75470. This is a 2 inch Class III trailer hitch receiver and is a completely no-drill install. I've linked an install video for you. If you don't already have them you'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch...
    view full answer...

  • Recommended Trailer Hitch Receiver For 2016 Jeep Rubicon Hard Rock Edition
  • My Curt representative tells me that according to the information they have, the # 9883544 will fit your Hard Rock 2016 Jeep Wrangler Rubicon. This fit to the frame and not the bumper so it will not interfere. Since you already have the wiring harness, you will just need a ball mount to start towing with this hitch. For a ball mount, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black # BWTS10038B. This will give you an adjustable hitch to...
    view full answer...

  • Best Trailer Hitch Receiver and Other Parts To Tow a Trailer with a 2016 Toyota Sienna Limited
  • The best trailer hitch receiver for your 2016 Toyota Sienna Limited is the Draw-Tite # 76112. This is my top choice because once it's installed on the van all you see is the receiver opening and safety chain loops. The cross tube is hidden under the van. If you're going to be towing a trailer you'll also need a wiring harness. The Tekonsha # 118648 will provide you with a 4-way trailer connector at the rear of the van. It plugs into connectors behind both tail lights and also has...
    view full answer...

  • Recommended Trailer Hitch Receiver For 2013 Ford Taurus Police Interceptor
  • For your 2013 Ford Taurus Police Interceptor, the Curt Trailer Hitch Receiver Class III - 2" 13552 is not a fit. For a confirmed fit, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2" # 75670. This will give you a 2 inch trailer hitch receiver on your police interceptor. I have attached a video to help. There is not a Curt brand hitch confirmed to fit, but Draw-Tite will. If you will be towing with this trailer hitch receiver, I recommend the Tekonsha T-One...
    view full answer...

  • Trailer Wiring Harness for 2017 Hyundai Santa Fe Limited without the Factory Tow Package
  • The wiring harness confirmed to fit your 2017 Hyundai Santa Fe Limited is # C56184. I've linked a video of the install on a 2014 Tucson which is a similar process to your Santa Fe. The Curt # C13153 is the trailer hitch I suggest for you. This install video is also linked. You'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once...
    view full answer...

  • Wiring Harness and Other Parts Needed to Tow a Trailer with a 2016 Volvo XC90
  • We haven't run across a situation where the OEM wiring harness was needed on a 2016 Volvo XC90. We offer the Tekonsha # 118683 wiring harness which is a 4-way connector. It includes a powered ModuLite to protect the Volvo's wiring. To install the harness you need to locate the connectors on your vehicle. You'll find them behind both tail lights. Then you need to run the hot lead to a power cable on the driver's side of the Volvo and connect it with a ring terminal with the included...
    view full answer...

  • Recommended Parts to Tow a Trailer with a 2002 Toyota Highlander
  • You're certainly not leaving yourself a lot of time. The trailer hitch receiver I recommend for your 2002 Toyota Highlander is the Draw-Tite Class III # 41541. The 2 inch receiver will have give you the full capacity of the Highlander and also give you a lot more variety in accessories that will fit. If your Highlander has a wiring connector just behind the rear bumper then you have the factory tow package. In which case I recommend using # 118245 for the wiring harness. If you...
    view full answer...


Do you have a question about this Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Amanda M
Updated by:
Kristina F
Video Edited:
Dustin K
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.