Price: $18.44

Curt Ball Mount for 2" Hitches - 2-1/2" Rise, 3-3/4" Drop - Angled Shank - 7,500 lbs

Item # C45067

lowest price pledge

Retail:$20.75

Our Price: $18.44

1 used item available

Orders above $99 qualify for Free Shipping

Quantity: 

In Stock
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

spin image icon
curt ball mounts no class iii 7500 lbs gtw c45067
curt ball mounts fixed mount drop - 4 inch rise 2 for hitches 2-1/2 3-3/4 angled shank 7 500 lbs
curt ball mounts fixed mount no for 2 inch hitches - 2-1/2 rise 3-3/4 drop angled shank 7 500 lbs
curt ball mounts fixed mount drop - 4 inch rise 2 for hitches 2-1/2 3-3/4 angled shank 7 500 lbs
curt ball mounts no drop - 4 inch rise 2
curt ball mounts fixed mount class iii 7500 lbs gtw for 2 inch hitches - 2-1/2 rise 3-3/4 drop angled shank 7 500
curt ball mounts no drop - 4 inch rise 2 c45067
curt ball mounts fixed mount drop - 4 inch rise 2 c45067
curt ball mounts drop - 4 inch rise 2 class iii 7500 lbs gtw c45067

Customer Photos

curt ball mounts fixed mount drop - 4 inch rise 2 c45067
curt ball mounts fixed mount drop - 4 inch rise 2 c45067

  • Fits 2 Inch Hitch
  • Fixed Ball Mount
  • Class III
  • 7500 lbs GTW
  • Drop - 4 Inch
  • Rise - 2 Inch
  • Curt
  • No Ball
  • Steel Shank
The best technical support and full ball mounts installation instructions. Lowest price Sienna ball mounts guarantee and expert service. Toyota Sienna, 2012 ball mounts by Curt are available from etrailer.com. For expert service call 800-298-8924 to order your Curt Ball Mount for 2" Hitches - 2-1/2" Rise, 3-3/4" Drop - Angled Shank - 7,500 lbs part number C45067, or order online at etrailer.com.



2012 Toyota Sienna - Curt Ball Mount for 2" Hitches - 2-1/2" Rise, 3-3/4" Drop - Angled Shank - 7,500 lbs

Corrosion-resistant, black powder coated ball mount measures 10-1/4" from center of hitch pin hole to center of ball hole. Angled shank is easy to insert into the receiver. For use in drop or rise position. Hitch pin and clip sold separately.


Features:

  • Ball mount lets you hook up your trailer to your tow Toyota Sienna
    • Shank slides into your Toyota Sienna's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Angled shank makes it easy to insert ball mount into hitch receiver
  • Sturdy steel construction
  • Corrosion-resistant, high-gloss black powder coat finish
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Gross towing weight: 7,500 lbs
  • Tongue weight: 750 lbs
  • Length: 9-3/4" from center of hitch pin hole to center of ball hole
  • Rise: 2-1/2" from top of inside of hitch opening
  • Drop: 3-3/4" from top of inside of hitch opening
  • Ball hole diameter: 1"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


45067 Curt Class 3 Ball Mount - Standard Duty 2" Right-Angle Ball Mount - 2" Rise, 4" Drop





Economy - This item

Curt Ball Mount for 2" Hitches - 2-1/2" Rise, 3-3/4" Drop - Angled Shank - 7,500 lbs


Curt Ball Mount for 2" Hitches - 2-1/2" Rise, 3-3/4" Drop - Angled Shank - 7,500 lbs
Curt Ball Mounts

103 reviews

Code: C45067

In Stock

Retail:$20.75

Our Price: $18.44


  • Ball Mounts
  • Fixed Ball Mount
  • No Ball
  • Steel Shank
  • Drop - 4 Inch
  • Rise - 2 Inch
  • Fits 2 Inch Hitch
  • Class III
  • 7500 lbs GTW
  • Curt


Corrosion-resistant, black powder coated ball mount measures 10-1/4" from center of hitch pin hole to center of ball hole. Angled shank is easy to insert into the receiver. For use in drop or rise position. Hitch pin and clip sold separately.

more information →
Compare Similar Products
Economy
Price: $14.14
$4.30 Less

Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K


Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Draw-Tite Ball Mounts

247 reviews

Code: 2753

In Stock

Our Price: $14.14


  • Rise - 3 Inch
  • Draw-Tite


Sturdy steel ball mount with hollow shank measures 9" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection.

more information →
Value
Price: $27.71
$9.27 More

Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs


Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
Curt Ball Mounts

38 reviews

Code: C45270

In Stock

Retail:$30.59

Our Price: $27.71


  • Long Shank


Corrosion-resistant ball mount is 13" long and fits 2" x 2" trailer hitch receivers.

more information →
Premium
Price: $73.83
$55.39 More

etrailer.com 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs


etrailer.com 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
etrailer Ball Mounts

100 reviews

Code: EBMK4

In Stock

Our Price: $73.83


  • Two Balls
  • Steel Ball
  • Rise - 3 Inch
  • 6000 lbs GTW
  • Ball Mount Kit
  • etrailer

Related Products



2012 Sienna by Toyota Owners Who Purchased this Ball Mounts Also Bought...







Video of Curt Ball Mount for 2" Hitches - 2-1/2" Rise, 3-3/4" Drop - Angled Shank - 7,500 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Ball Mounts C45067 Review

Today, we're going to be taking a look at part number C45067. This is a Curt ball mount. It's going to offer both drop and rise positions. It's going to be rated at 7500 pounds. The ball mount is going to let you hook up your trailer to your tow vehicle. The shank portion here is going to slide into the receiver tube of your hitch. Then the ball platform is going to provide a good mounting point for a hitch ball.

Hitch balls are going to be sold separately. Now, again, both the drop and rise positions are available to help insure a level tow. One of the things I want to point out is here at the back, you can see that it's going to have a hollow shank. It's also going to have an angled shank. The angled shank is going to make it a lot easier to insert the ball mount into the receiver tube of your hitch. It's made from a sturdy steel construction. It's going to have a corrosion resistant, high gloss, black, powder coat finish.

Once you have this installed on your hitch, you're going to need to secure it with a hitch pin and clip or a hitch lock. Those items are sold separately. You can find those here on our website, using part numbers C21500 for a 5/8 inch pin and clip, or part number 7583 for a hitch pin and lock. This ball mount is going to be made in the USA. It's designed for 2 inch x 2 inch trailer hitch receivers. It's going to offer a gross towing weight of 7500 pounds with a maximum tongue weight of 750 pounds. There are a few measurements I want to go over with you real quick. If we take a measurement from the center of the hitch pin hole to the center of the hitch ball hole, that's going to give us a measurement of 9-3/4 of an inch. Here on the sticker of the Curt ball mount, you're going to see that it says a "4 inch drop and a 2 inch rise." These are rounded or approximate measurements.

I'm going to go ahead and give you the exact measurements real quick. When we take a measurement from the top of the ball platform to the top of the shank, we're going to get an exact measurement of 3-3/4 of an inch. That's going to be the amount of drop that this ball mount offers. You can use it in the rise position. If we do that same measurement, top of the shank to the top of the ball platform, that's going to give us a rise of 2-1/2 inches. It's going to have a drawbar thickness of about 3/4 of an inch. The ball hole diameter is going to measure 1 inch. When choosing the hitch ball, you want to make sure that the shank of that hitch ball matches up with the ball hole diameter. Really simple installation.

All you have to do is place it through the receiver tube of your hitch, line up your pin holes, and then insert a 5/8 inch pin and clip, or a hitch pin and lock. Once you have that set, you're going to be ready to go. I do have a hitch ball with a 1 inch shank diameter, just to show you what it looks like. Again, these are sold separately. You can see there how it fits, how it looks. Then all you'd have to do is install your lock-washer and the nutrition, and get it torqued to specifications. That's going to do it for our review of part number C45067. This is the Curt ball mount for 2 inch hitches. .


Customer Reviews

Curt Ball Mount for 2" Hitches - 2-1/2" Rise, 3-3/4" Drop - Angled Shank - 7,500 lbs - C45067

Average Customer Rating:  4.9 out of 5 stars   (103 Customer Reviews)

Corrosion-resistant, black powder coated ball mount measures 10-1/4" from center of hitch pin hole to center of ball hole. Angled shank is easy to insert into the receiver. For use in drop or rise position. Hitch pin and clip sold separately.

- C45067

by: Bill B08/15/2017


I installed the Curt trailer hitch on my 2013 Acura RDX. Installation was simple. After sliding the hitch into position, I set a bucket under the center of the hitch and that held it up while installing the bolts. Since my car is not new, I cleaned the threads with a nylon brush and penetrating oil. After inserting the bolts and nuts, I torqued each type to the specified ft-lbs with my torque wrench. No problems; the installation was done in less than an hour. I also installed the Curt wiring harness. The connector is on the left side of my 2013 RDX under the removable panel and forward of it. I did not take out any additional panels but fed the wiring under the panel and along into the spare tire compartment. To protect that wiring from chafe, I put in in a plastic wiring split tube purchased elsewhere. I disconnected that battery as suggested which meant that I had to restart my navigation system when the job was done (easy to do); this did not lose any of the items in memory. There was no fuse in the slot for the trailer in the fuse box under the hood so I used a spare 20A in that slot. Total time less than an hour. 423681



- C45067

by: Tommy D10/22/2016


Hello George: I recently ordered the following for my 2005 Silverado : 13322 Class III Hitch - Gm 1500/2500 Pickup Curt Angled Ball Mnt - 2 Rise, 4 Drop, 10-1/4 Long Pin And Clip For Class III Iv And V Trailer Hitch Receiver Pollak 7- And 4-pole Connector Socket W/mount Bracket I got free shipping and received the hitch in 4 days. I thought I would save some money and install it myself not knowing what all it entailed. So I reviewed the U-Tube video and figured it wouldn't be so hard. The video was exactly representative of my vehicle. Everything bolted right up. To those that wish to do this I will caution you the my biggest challenge was removing the ball that was rusted onto my bumper. The other things you may run into is removing the spare because sometimes the lowering mechanisms are seized due to rust like mine was. Both the ball and spare tire hoist had to be cut off. Other than those two items the install went smoothly. The hitch looks awesome and as though it was factory installed. Thank you for a quality product and an excellent price. 309615



- C45067

by: Don S.09/30/2015


I bought the 3 piece package, class 3 hitch receiver, wiring harness, and ball mount assembly. Installation of the wiring harness and receiver went well even without a having helper position the receiver to the bolt holes. After installation on my 2015 Honda CRV I note that both my boat trailer and utility trailer need a ball mount with no rise or drop so will have to buy another one locally. The one you recommended and sent has a 2.5" rise/3.75" drop. 228497


Comments

After a year the hitch works great and looks great. 2 CRV owners were jealous when told mine cost 1/3 what they paid the dealer for lighter duty units.

Don S - 09/29/2016

21329

- C45067

by: Jeff G.07/13/2017


Once again etrailer delivers; Great customer service and very fast shipping to APO AE address via USPS Priority Mail. The product was installed on a 2017 Jeep Grand Cherokee Summit 4x4. The product fits right in the 2x2 inch hole on the OEM class IV receiver. Feels and has a high quality touch/finish (looks like it will last for years). I use to have a 2 inch drop, but got a new trailer and the 2 inch drop was too high, making the new trailer ride high in the front (not much, but the trailer was not level). Took the correct measurements after leveling the trailer and determined that a 4 inch drop was needed. Took the 50mm ball (fits European trailers - which I also bought from etrailer) off my 2 inch drop and mounted it on the 4 inch drop and now all is correct and the new trailer sits and rides level when hook up to the Jeep Grand Cherokee. Overall great product, awesome customer service and shipping +++, was exactly what I needed. Will definitely buy from or point to etrailer again whenever I or someone needs something. Thanks, Jeff 405042



- C45067

by: Dan05/02/2015


This was quite reasonable to install on our 2004 Pontiac Montana and I am not one to work on cars - at all. Our local shop just wanted way too much to install one for us. The online videos were most helpful. The only tricky parts were getting the nuts and bolt through the holes in the vehicle frame. But the hitch manufacturer has engineered excellent solutions for this so it just takes a little patience. The wiring harness was right where they said it would be, inside the trim panel at the very back of the vehicle. I couldn't see it through the access panel so removed the full panel itself. But it turned out this was likely unnecessary. If I had fished around more in their by hand, I probably could have identified it by feel. Our van has drivers side power door and rear ac so there is a lot of stuff inside the access panel. Overall, it took about 2.5 hours from start to pulling a trailer! That was with a fair amount of chatting with the friend who helped me. Excellent product. 189414



- C45067

by: Bruce09/28/2015


No problems. 228234


Comments

No problems, working great.

Bruce - 09/28/2016

21277

- C45067

by: Michael08/17/2015


I ordered multiple items online, and within 2 1/2 hours I received an email stating the items had been shipped. The items arrived in a timely manner, and were exactly as described online. I was able to install the hitch by myself in approximately 30 mins, and everything fit perfectly. I'd give etrailer.com an A+ rating for customer service and support. This is my new go to place for all my future trailer needs, and I've put out the good word to my fellow truck owners. Keep up the good work!!!! Thanks George... 219768



- C45067

by: Stefan S06/24/2016


Very well built, installs and removes easily. I'm using it on our Toyota Sienna mini van, the 2 1/2" rise gets the ball at a perfect height for towing our boat. One thing I didn't consider when I bought it is the torque required when you attach the hitch ball - if I remember right it was over 200 lb-ft. I didn't have a torque wrench that went anywhere near that so I had to bring it to a mechanic to get it installed. Having the option to have the ball pre-installed would have been great. 264445



- C45067

by: Alex Koeppl08/02/2015


Purchased the CURT trailer hitch receiver, ball, and very heavy-duty ball mount. No problems with the shipment and the hitch is quite secure and I am satisfied with that. However the ball mount has excessive play in the receiver making the towing experience nerve racking. I'm really surprised the clearance between the ball mount and hitch isn't closer as to reduce the rattling. There is some anti-rattling products available, but to me this seems like an after thought. 216178



- C45067

by: Al05/13/2015


I like the trailer hitch very much. It fits perfectly and it looks great. I took a fair amount of time, but that was partly by choice because I didn't want to make mistakes but also because I didn't have all my tools together as I should have. The best part of this project was having the video to see the whole process. Also the installation of the tail light with converter hardwire kit went very well. It was all very clear. 192768



- C45067

by: Maurice07/24/2015


I recently ordered and installed a new hitch on my new 2016 Mazda cx5 that I purchased with etrailer. It was an easy installation and a nice custom fit. When I called to order I spoke with Melinda and she was very knowledgeable about the product and got me everything I needed to complete the installation. The communication and shipping of the product was very quick. I would highly recommend doing business with this company. 214032



- C45067

by: Joe K.06/30/2015


Excellent service from etrailer.com. The hitch and wiring to my 2015 Honda CRV was delivered within 3 days and the videos on the web site and emails sent from etrailer.com were excellent and made the installation effortless. Highly recommend etrailer.com. Thank you for saving me $600.00 by doing it myself and not letting the Honda dealership install the hitch and wiring at a whopping $800.00 quote. 208373



- C45067

by: George Jr.03/09/2017


All items Hitch, Ball Mount and wiring harness all arrived very promptly. the only issue was UPS simply just left the box on the backside of my home versus my door and I was home. The box was severly damaged and ripped. Had to call E-trailer to make sure all items were in the damaged box, E-trailer staff are the Best Keep up the great work and follow through. 350181



- C45067

by: Dennis D06/26/2015


The hitch and bike rack are very high quality and were easy to install - instructions were great. No problems. I would have gladly paid a bit more for better packaging; very torn up and tape over large holes in box when it arrived. The box worked great to lay on under the van for installation. I installed it alone in about an hour. 207302



- C45067

by: Maynard G.09/12/2015


We watched the video you have several times before we ordered the hitch.The one we ordered is for a 2014 Honda CRV. I am 80 years old and it took me about 11/2 hours to install and everything works perfect. We live in Florida so I had to come in a couple times to cool off . I would recommend your product to everybody. Thank you 225153



- C45067

by: Jim C05/05/2015


You have this as recommended for a 2013 Subaru XV Crosstrek A 3 3/4 drop is too much-a 2 or 2 1/2 seems best. For this, an 8 ft. landscape trailer, the 2" drop is a perfect level. Overall the receiver,wiring & lock were quick to install, and as I've used Curt for years, I'm sure it will last for years.We are a repair shop. 190216



- C45067

by: Mike D08/12/2017


Excellent product. Once the nuts on the van are cleaned properly installation is fast and easy. It does help to have a second person. Installation and removal is so easy that actually remove it each winter. I do recommend installing airlifts as the clearance with a trailer is quite minimal without them. 423147



- C45067

by: Becky J.08/01/2017


We are still happy with the hitch set-up we purchased. The website was great to show the other items that worked with the mount and all items purchased work well together. We needed a rise and this product can be turned either direction to rise or drop. eTrailer was the only place that had such a mount. 413652



- C45067

by: MG Mike10/03/2016


I rarely give a 5 star rating to any product, but I can't think of any reason not to on this trailer hitch. I will go a step further and state that I am totally pleased with all the products I have bought from e trailer.......2 receiver hitches and 2 wiring kits for Honda CRV and Subaru Outback. 302691


Comments

Im still very happy with the products.

mike r - 10/03/2017

28636

- C45067

by: Betty12/10/2016


Excellent product . Easy to install . Has taken me on many camping trips ! 324024



- C45067

by: Trevor07/16/2015


Bought a Curt class III for a '10 Honda Odyssey. This is the second hitch I've purchased from etrailer.com and it installed just as easy as the first ('07 Hyundai Sonata). The install videos on the website show how simple it is. This company seems to get it right. 212275



- C45067

by: Sal H.06/18/2016


Product came in as promised. Installation was extremely easy. 262337



- C45067

by: allen b boatright05/04/2015


I am pleased with my 2002 dodge ram trailer hitch it was delivered in about 4 days. It took about 30 min to put on my truck. also orderd a curt ball mount and lock it all worked great and all came at once I would recommend e trailer great exp. thanks allen b 190063



- C45067

by: allen b boatright05/04/2015


I am pleased with my 2002 dodge ram trailer hitch it was delivered in about 4 days. It took about 30 min to put on my truck. also orderd a curt ball mount and lock it all worked great and all came at once I would recommend e trailer great exp. thanks allen b 190061



- C45067

by: Harry06/02/2015


Ordered this with the Curt hitch. Fit no problem. Although make sure you take this extension in with you when you get the ball so you get the right size diameter shank. Curt has different size holes in their extensions. 199932



- C45067

by: Joe S12/21/2016


I was pleasantly surprised at the quality of this product. It is heavy duty without question. After 1 year it still looks new. Also, Carla and team provided fast, courteous service - a pleasurable experience. 326923



- C45067

by: Jim H.10/17/2017


The class III receiver was easy to install. The ball mount and lock were of good quality and I will probably contact you about purchasing sway control equipment soon. Thanks, Jim Harvey 443447



- C45067

by: Mike S.05/16/2015


Excellent product with great instructions. Easy installation. Free shipping and arrived in 2 days without the shipping upgrade. Just used floor jack to position and install was a snap. 193567



- C45067

by: Tracemo05/27/2017


Received everything to install hitch for Dodge 2013 van. All items were received as promised and installation was relatively simple. Excellent customer service! Thank you Donna : ) 385549



- C45067

by: Anthony04/06/2017


Great quality especialy for the price, bolted up perfect and all the hardware was included, been using it to tow my boat with a '13 honda crv. Instructional video was dead on. 365828



- C45067

by: Jeremy08/17/2017


Great quality product, fast deliver and excellent customer service. I have already referred several people and will continue to purchase from them! Do not hesitate to order! 421493



- C45067

by: Charlie Mac08/25/2015


Ordered on Wednesday at 8pm, by Friday afternoon, it was sitting in the garage. No issues with the order and very fast shipping. Perfect height for 2016 Mazda CX-5. Thanks! 221715



- C45067

by: Kenneth08/09/2017


Completely satisfied with the products and service. I was able to install everything myself with the help of the specific videos provided for the products. 417991



- C45067

by: Wesley W08/02/2017


Hitch quality and instructions were great. It's been a little over a year and I have had no issues. I will definitely use then again when I buy my truck. 413937



- C45067

by: Dan W04/12/2017


This Hitch ball mount was the recommended item for my 2012 Toyota Sienna. I found it has the correct amount of offset for my trailer and works great. 366369



- C45067

by: Matt K06/29/2015


The products arrived, totally as advertised, in a timely manner and were exactly what we were looking for. I would definitely use this website again! 208022



- C45067

by: Bob L.06/27/2016


I put the hitch on my daughter's 2015 Patriot. Installation was easy and the instructions were complete and accurate. Excellent product! 265504



- C45067

by: Byron08/06/2017


Quite pleased with etrailer ball hitch accessories which I am using on a spindle wheel motorcycle carrier behind a fifth-wheel trailer..... 420210



- C45067

by: Andy S03/02/2017


I am very pleased with this purchase. I have a fairly light utility trailer but this is clearly built to handle a heavy load easily. 347622



- C45067

by: Steven C.05/03/2015


Fast shipping, good packaging, and a very high quality product. Installation went quickly and smoothly, even for this neophyte. 189521



- C45067

by: Dean H.09/15/2016


Have not gotten to use the product much but when I did it worked as advertised. Fells solid very good piece of towing equipment. 295048



- C45067

by: Craig05/13/2016


The Curt Ball Mount trailer hitch is a solid piece of steel with good welds. Have been using it for a year and no problems. 250091



- C45067

by: Dale W02/24/2017


Product great , delivery great , customer service exceptional! This is the only place to shop! And I do often!!!!!!!!! 345500



- C45067

by: Todd K.08/17/2017


Good product, and for once good instructions. Obviously not written in China or India. Looks good on my vehicle too. 421791



- C45067

by: Ted P07/16/2017


Never installed one before ... easy, simple ... took 15 minutes only because I watched youtube video twice. Thank You! 407105



- C45067

by: Tim Y.05/20/2015


This was my fourth purchase from etrailer and the product and delivery were quick and in excellent condition. Thx 194618



- C45067

by: Chanda M.08/30/2017


I received terrific phone service and my order arrived exactly when I was told it would. Thank you so much! 427028



- C45067

by: Johnnie P12/06/2016


Good product and good inventory. Service and shipment were much faster than anticipated. Will use again. 322500



- C45067

by: Mr Linn01/19/2017


Great price, fast deliver and very well made. Can't tow without it, so get the best one from etrailer! 333870



- C45067

by: Jack06/19/2017


Fast shipping, very easy to install. Great customer support and follow-up. Certainly will recommend. 398068


50
103
Show More Reviews

Ask the Experts about this Curt Ball Mounts
Do you have a question about this Ball Mount?


  • Trailer Hitch and Wiring for a 2016 Toyota Sienna XLE
  • For your 2016 Toyota Sienna XLE I recommend Curt trailer hitch # C13105. This is a Class III trailer hitch with a 2 inch receiver. If you plan on doing some towing with the hitch the recommended ball mount is # C45067. It has a 2-1/2 inch rise and 3-3/4 inch drop. For a 2 inch ball I recommend # 40038. For a 2-5/16 inch ball I recommend # C40007. And for a hitch pin I recommend the classic # PC3. If the ball mount kit does not have the right rise or drop to tow the trailer level,...
    view full answer...

  • How Does a Hitch Cover Install on a Hitch and Can It Be Locked in Place
  • The part you referenced, Firefighter's Axe Trailer Hitch Cover # 03409210217, is intended to install into a 2-inch hitch receiver tube. This is the square opening shown in the linked image. The image also shows the receiver's hitch pin hole into which a lock such as # 7683 can be installed to lock a hitch cover to the hitch tube. In a towing setup a ball mount (sometimes called a draw bar) like # C45067 is inserted into the hitch receiver tube and the actual hitch ball then mounts to...
    view full answer...

  • Trailer Hitch Recommendation for 2012 Jeep Liberty
  • For the 2012 Jeep Liberty, I recommend the Curt Trailer Hitch # 13245. This is a Class III rated trailer hitch with a 2 inch hitch receiver. This hitch has a maximum gross trailer weight of 5,000 pounds, but I recommend checking your vehicle's max towing capacity before choosing a trailer and cargo to tow. The Curt hitch has the same quality construction and capacity as the other choices, but with a more economically friendly price. I have attached an installation video of this hitch on...
    view full answer...

  • Is it Better to Go with Higher or Lower Rise Ball Mount than Needed
  • You've got good instincts. I recommend going with a ball mount that has a 2 inch rise for the exact reason you mentioned, the truck will settle a bit with the tongue weight and any cargo weight. The ball mount we offer with a 2 inch rise is the Curt Class III Drawbar # C45270. This is considered an extra long ball mount, measuring 13 inches from the hitch pin hole to the ball hole. Another option is the Curt Ball Mount for 2 Inch Hitches - Angled Shank # C45067. This ball mount...
    view full answer...

  • 2 inch Rise Ball Mount Availability
  • We carry several ball mounts that have a 2 inch rise. I attached a link to a page that has all of them listed. The most popular one we carry for a 1-1/4 inch hitch would be part # C45521 and for a 2 inch hitch part # C45067. We do carry a 2 inch hitch ball with a 2 inch rise built into it that has a 1 inch shank diameter, part # C40034. The thing about Class I ball mounts is that you are only supposed to use the recommended ball mount for the hitch that is installed in the vehicle....
    view full answer...

  • Trailer Hitch Recommendation for a 2016 Subaru Crosstrek
  • For your 2016 Subaru Crosstrek I recommend Curt trailer hitch # C13135. This is a Class III trailer hitch rated for 525 pounds tongue weight and 3,500 pounds gross trailer weight. Consult the vehicle owner's manual for the capacities of the vehicle and go by the lower rating. I have also included a link to a video showing installation of the hitch on a 2015 Subaru XV Crosstrek as well as a link to the installation instructions. For this hitch the recommended ball mount is # C45067 with...
    view full answer...

  • Will Draw-Tite Class III Trailer Hitch Receiver Fit on All Models of 2016 Toyota Sienna
  • The Draw-Tite Max-Frame Trailer Hitch Receiver # 76112 is a Class III hitch that is a confirmed fit for all 2016 Toyota Sienna models. If you plan to tow with your van the Tekonsha Wiring Harness # 118498 will provide a 4-way connector for you. This harness plugs into connectors behind both tail lights and doesn't require any wire cutting. I've attached a link to our selection of ball mounts for you. The Curt Class III # C45067 is a great option that gives you either 2-1/2 inches...
    view full answer...

  • Comparison of Available Hitches and Towing Accessories for 2016 Mazda CX-5
  • The available Draw-Tite Class III, part # 76138 has a slightly higher capacity than the Curt Class III, part # C13315. The Draw-Tite is a bit less expensive, but the Curt model is very slightly easier to install. For a plug and play trailer wiring harness, use part # 118563 which is compatible regardless of whether or not your vehicle is equipped with LED taillights. For a ball mount, use part # 2753, and for a trailer ball, use # 19260 for a 1-7/8 inch ball or # 63845 for a 2 inch. If...
    view full answer...

  • Trailer Hitch and Wiring Harness Recommendation for 2015 Kia Sedona
  • We offer a replacement 4-pole flat trailer wiring harness for the 2015 Kia Sedona that has the factory tow package connectors. Curt harness # C56256 plugs in behind the underbody panel on the rear driver's-side corner as shown in the linked video. You will make two plug-in connections at this OEM wiring, install the supplied 10-amp fuse and mount the converter box using the included double-sided tape. This 4-pole trailer connector will then provide stop, turn and taillight signals to your...
    view full answer...

  • Recommended Hitch for 2015 Toyota Sienna XLE
  • We offer both light-duty 1-1/4-inch Class II and medium-duty 2-inch Class III hitches for your 2015 Toyota Sienna XLE. All can be seen on the linked page. The two linked articles offer helpful background on hitch types. We always recommend opting for the higher capacity 2-inch hitch when the choice exists. This hitch size offers better compatibility with a wide range of hitch-mount accessory items like bike and cargo carriers and a Class III will usually also have a higher weight capacity....
    view full answer...

  • Recommended Trailer Hitch and Towing Parts Needed to Tow Camper with 2016 Ford F-150 XLT
  • For your 2016 Ford F-150 XLT without a factory trailer hitch, I recommend the Curt Class III Receiver Hitch # C13118. This is custom fit for your truck and will provide a 2 inch hitch opening with a 900 pound tongue weight capacity and 6,000 pound towing capacity. No drilling will be required during installation but the spare tire will need to be lowered or removed temporarily. I have attached an installation video on your vehicle for you to check out. For a ball mount and hitch ball...
    view full answer...

  • Recommended Trailer Hitch for Towing Small Boat w/ 2015 Subaru XV Crosstrek
  • If all you'll be using the hitch for is towing, I'd go with the Curt Class III hitch, part # C13135. If you're also planning on using the hitch as an attachment point for a hitch mounted accessory, the C13135 wouldn't be your best choice. All the Curt hitches available for your XV Crosstrek have a warranty stipulation that requires that a stabilizing strap like # 18050 be used for all non-trailer loads like cargo carriers or bike racks. The problem is, the stabilizing straps don't work...
    view full answer...

  • Recommended Trailer Receiver Hitch for 2004 Dodge Ram 1500
  • The correct hitch for your truck will depend on what capacity you were needing. For instance, if you'll be towing trailers weighing less than 6000 lbs, a Class III hitch like the # 75662 would be ideal. The hitch would bolt to the existing crossmember and the rear bumper. For a heaver trailer (assuming your truck has the necessary capacity), a Class IV hitch like # 14361 would work well. The Curt # C15409 you referenced is only a fit for trucks already equipped with the factory hitch. You...
    view full answer...

  • How to Choose the Correct Ball Mount for a 2005 Toyota Sienna
  • In order to choose the correct ball mount for your 2005 Toyota Sienna you would want to measure from the ground to the top of your hitch receiver tube opening and from the ground to the bottom of the coupler on your trailer while level. The difference between the two measurements will give you the correct amount of rise/drop you will need to look for in a ball mount. I have attached a help article that will walk you through this process as well. The most common ball mount used for this...
    view full answer...

  • Trailer Hitch and Wiring for a 2006 Ford F-150 with Tommy Lift Gate
  • We do have a trailer hitch designed to fit a 2006 Ford F-150 with the Tommy Lift Gate but # 41933 is not an option. The hitch that will work is # 13372. this is a 2 inch hitch rated for 600 pounds tongue weight and 6,000 pounds gross trailer weight or 1,000/10,000 pounds when used with weight distribution. The recommended ball mount for this hitch is # C45067 with a 2-1/2 inch rise or 3-3/4 inch drop. If the ball mount does not have the right rise or drop to tow the trailer level, use...
    view full answer...

  • Class III Trailer Hitch Recommendation for 2015 Subaru XV Crosstrek
  • The Curt Class III hitch, part # C13135 would be an excellent choice for your 2015 Subaru XV Crosstrek. When installed, the hitch pin hole in the receiver would only be recessed under the vehicle by 2 inches, which means you'd have plenty of clearance for any Thule hitch mounted bike rack. I've linked you to an install video that you might find helpful. If you plan on doing any towing with the hitch, you might also be interested in the following items to complete your towing set-up: Trailer...
    view full answer...

  • How to Select Correct Ball Mount to Allow Towed Trailer to Remain Level
  • You ask a good question. It is important to select a ball mount for your towing set-up that allows the trailer frame to be level with the ground when it is hitched to the tow vehicle. Level trailers handle better and tend to have less sway. With that said, it is generally a good idea to start out with your tow vehicle's hitch ball sitting a good inch (or maybe a little bit more) HIGHER than the trailer coupler. This height difference tends to compensate for the normal rear-end squat...
    view full answer...

  • Capacity of Curt Class III # C13119 Trailer Hitch Versus Capacities of 2012 Honda CR-V
  • For a 2012 Honda CRV, you'd want to use the Curt Class III hitch, part # C13119. The Curt # 13555 fits 2007-2011 CRV models only, and wouldn't be a fit for your 2012 model. The hitch itself carries a 3500 lb towing/350 lb tongue weight capacity, but these capacities will be limited by the capacities of the vehicle itself, since the capacities of your CRV are lower. You'll want to abide by the capacity of the lowest rated component. According to Honda, the maximum towing capacity of the...
    view full answer...

  • Difference Between Long and Extra Long Ball Mounts
  • The long ball mounts like the part # C45067 have around 10 inches from the center of the hitch pin hole to the center of the ball hole whereas the extra long ball mounts like the # D-26 have around 12-1/2 inches from the pin hole to the ball hole. These categories are ones that we developed to help organize the ball mounts on our ball mount page. There aren't hard and fast guidelines on how each ball mount is organized. If you need a specific length and rise/drop email me back and will...
    view full answer...

  • Recommended Trailer Hitch and Wiring for 2016 Toyota Sienna
  • The Curt Class III Trailer Hitch Receiver # C13105 referenced in your question is confirmed to fit your 2016 Toyota Sienna. This 2 inch trailer hitch receiver has a tongue weight capacity of 350 pounds and a gross trailer weight capacity of 3,500 pounds. It is custom fit for your vehicle, so there will be no drilling required during installation. I have attached an installation video on your vehicle for you to check out. The Curt T-Connector Vehicle Wiring Harness # C56106 also...
    view full answer...

  • Can Curt Class III Ball Mount # C45056 Be Used in Rise Position
  • I spoke with my contact at Curt regarding the Curt Class III Ball Mount with 2 Inch Ball # C45056 referenced in your question. He did state that the ball mount can be used in the rise position, which will indeed provide a 2 inch rise. The issue with this particular model is that the hitch ball will come already torqued from the factory. My contact stated that it is torqued at a high amount so it might be quite difficult to actually remove the ball so you can flip it over to use in the rise...
    view full answer...

  • Curt Ball Mount Recommendation that Has 2-1/2 inches Rise and 3-3/4 inches Drop
  • We actually used to carry that part number but just discontinued it since it's no longer available. We do have similar ball mounts though. For almost an exact match we have the part # C45067 that has the same 2-1/2 inch rise and 3-3/4 inch drop. Only difference is the back of the ball mount shank is angled which makes for easier insertion into a hitch.
    view full answer...

  • 2 inch Rise Ball Mount Recommendation that is 10 inches from Ball Hole to Pin Hole
  • The part number # C45067 would be your best option. This ball mound will do 2-1/2 inches of rise which would be close enough for your setup most likely when you take into account a bit of sag from the weight of your trailer's tongue weight. The ball mount is 10-1/4 inches from the center of hitch pin hole to center of ball hole as well. For a 2 inch ball the part # 40038 would be what you need and for a 2-5/16 inch ball part # C40007.
    view full answer...

  • Carrying 190lb Scooter in Hitch Mounted Carrier on 2015 Subaru XV Crosstrek
  • I've located on online copy of the owner's manual for your XV Crosstrek. On page 8-21, Subaru states that the maximum trailer tongue weight (maximum allowable amount of downward force applied to trailer hitch) cannot exceed 200 lbs. Unfortunately, any carrier plus the 190 lb weight of the scooter would exceed that 200 lb capacity so therefore I couldn't recommend using a hitch mounted carrier to transport your scooter. A 300 lb rated carrier is what I'd normally recommend, but in this...
    view full answer...

  • Can You Pull Tandem Trailer with 2007 Chevy Uplander Ls with Class 3 Hitch
  • The 2007 Chevrolet Uplander with a Class III hitch has a 4,000 lbs maximum gross trailer weight (6,000 lbs) with weight distribution. You should not experience problems when towing, assuming the tongue weight of your trailer will not exceed 400 lbs and the total weight of the trailer will not exceed 4,000 lbs (or 6,000 lbs with weight distribution). I also did some research on your 2007 Chevrolet Uplander and found that the maximum recommended towing capacity for this vehicle is 3,500 pounds....
    view full answer...

  • Recommended Trailer Hitch And Wiring For 2014 Dodge Grand Caravan
  • We have everything you need for your Grand Caravan, but I cannot guarantee the price will stay within the range you are asking for. It depends on the items you need. First, I recommend the Curt Trailer Hitch, part # 13364. This is a Class lll hitch and it has a 2 inch receiver opening. I have attached a link to an installation video for this hitch on a 2014 Grand Caravan. You will need a ball mount and for that I recommend part # C45067. This ball mount has a 2-1/2 inch rise or...
    view full answer...

  • Recommended Way to Transport a Motorcycle with a 2014 Chrysler Town and Country
  • I took a look at your owners manual and it appears that even though the hitch is rated for 400lbs tongue weight the vehicle's frame itself isn't. You can check the placard on the inside of your driver's door or your owner's manual on page 550 to see that your max tongue weight is at best 360lbs. So your best option is a small trailer like the Little Giant # TLK864. This trailer has bed dimensions of 86-3/4 inches long x 56-1/2 inches wide x 23 inches tall. This trailer weighs up to...
    view full answer...

  • Correct Trailer Hitch for 2003 Dodge Ram 1500 Built in July 2002
  • The Curt hitch # 13326 that you referenced is indeed the correct Class III hitch for your 2003 Dodge Ram 1500 built in July 2002. This hitch offers a 500-lb tongue weight (TW) capacity and includes the required installation hardware. I have linked an installation video for you showing an application in your same truck. Two helpful hitch installation articles are included as well. If you'll be towing you'll need a ball mount and hitch ball. The recommended ball mount for this hitch is...
    view full answer...

  • What is Needed to Tow Safely With a 2011 Toyota Sienna XLE?
  • Happy to see that safety is important enough that you'd ask, and the answer is no, you do not need any additional equipment such as engine coolant in order to tow safely with your 2011 Toyota Sienna. Now, that does not necessarily mean something like a transmission cooler is a bad idea, as it will stop your Sienna from working quite so hard, but it is not necessary. What you will need, however, is a hitch, and the Curt # C13105 has a 2" x 2" opening with a max tongue weight of 350 lbs...
    view full answer...

  • Will Curt Bumper-Mount Trailer Hitch # E-3S Fit 2008 Toyota Sienna
  • The bumper-mount 2-inch hitch you referenced, Curt # E-3S, is not suitable for use on the rear bumper of your 2008 Toyota Sienna but we do offer custom-fit 2-inch Class III hitches that will bolt right on to your Sienna. All choices can be seen on the linked page, but the most cost-effective option is Curt # C13105. This hitch bolts on using included hardware and requires no drilling. The linked video shows the complete installation and two linked articles will give you useful tips...
    view full answer...


Do you have a question about this Ball Mount?


Used Items Available
RU-17-C7-00007661

Condition: Installed

Notes: Item has install marks from having the ball attatched

Our Price: $5.30

Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Kathleen M
Photos by:
Sam P
Written by:
Chelsea B
Test Fit:
Randy B
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.