1. Trailer Hitch Ball Mount
  2. etrailer
  3. Fixed Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 4 Inch
  6. Rise - 3 Inch
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs

etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs

Item # EBMK4
lowest price pledge
Our Price: $107.84
Trailer Hitch Ball Mount
This item qualifies for Free Shipping
Shipping Weight: 13 lbs
Quantity: 
In Stock
Trailer Hitch Ball Mount EBMK4 - Fits 2 Inch Hitch - etrailer
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Call etrailer.com at 800-298-8924 for expert service. We are your Dodge trailer hitch ball mount experts, and offer a lowest price guarantee. etrailer.com carries a complete line of etrailer products for your Dodge 2001. etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs part EBMK4 from etrailer can be ordered online at etrailer.com. Complete trailer hitch ball mount installation instructions and technical support.
  • All Info
  • Reviews (103)
  • Q & A (265)
  • Videos (2)
  • Photos
  • Why etrailer?

etrailer Trailer Hitch Ball Mount - EBMK4

  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 4 Inch
  • Rise - 3 Inch
  • Two Balls
  • etrailer
  • Class III
  • 6000 lbs GTW
  • Ball Mount Kit
  • Steel Shank
  • Steel Ball


etrailer 4" Drop Ball Mount Kit

  • Works with 2" x 2" trailer hitch receivers (class III)
  • Kit Includes:
    • (1) Ball mount with 2-3/4" rise or 4" drop (# 2753)
      • Capacity: 7,500 lbs GTW and 750 lbs TW
    • (1) Convert-A-Ball Interchangeable Ball System with a 1-7/8" and 2" hitch ball (# 901B)
      • Ball capacity: 10,000 lbs GTW
    • (1) Pin and Clip (# PC3)
    • (1) etrailer Ball Mount Bag (# ETBMB)


2953w/PC3 + 901B etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs



Video of etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Ball Mounts - Fixed Ball Mount - EBMK4 Review

Today were going to review part number EBMK4, this is the Etrailer.com Ball Mount Kit for 2-inch hitch receivers. This ball mount kit will include one ball mount, it will include a pin and a clip; it will include Convert-A-Ball Interchangeable Ball System that comes with a 1 7/8-inch hitch ball head and a 2-inch hitch ball head. It will also the Etrailer.com ball mount bag.This kit will be nice to use when youre going to be towing multiple trailers that might have a different coupler size on them.Im going to start with the ball mount. Basically the part number is 2753. And this ball mount will have a 2 -inch rise or a 4-inch drop depending on how you use it. What Im going to do is measure it for you and give you an idea.

This is in the drop position so the measurement would be here to here; the top of this to the top of where the ball sits. So if we put a tape on that, it would measure 4-inch drop. Now if we put a tape on that, it would measure 4-inch drop. Now if you put it in the other way, that will give you a 2 -inch rise which is measured from here to here. So if we measure that it would be 2 of an inch.

Now this ball mount does have a gross towing weight capacity of 6,000 and has a tongue weight capacity of 600 pounds. It also comes with part number PC3 which is a 5/8-inch diameter pin and the clip that would be used to attach the ball mount to the hitch receiver. This would slide into your hitch receiver, you line the holes up, run your pin through, put the clip on; that will keep your ball mount inserted into your hitch receiver.Next item is the converti-ball interchangeable ball system and what that would be is this would mount onto the ball mount using the included washer and nut. The size of this nut is 1 inches. That would tighten down to your ball mount and notice theres a hole through it, you would slide the cotter in through that hole, spread it apart and that would be a safety feature in case that nut happen to back off and keep it from falling off the shank.

Now this shank with the ball attached will have a gross tongue weight capacity of 10,000 pounds. And Im going to give you a few dimensions on the shank. The diameter of the shank which is right here will 1 inch. The length which is from here to here will measure 2 inches. And then this would be, its stamped on top, is the 1 7/8 hitch ball diameter size and this stamped on top would be 2-inch diameter hitch ball size.

And basically the way this would be installed, this has an integrated pin in the ball which what you would do is find the side that has a dimple on it and just push that side and it will allow you to pull this pin all the way out and what youll do is line it up to the shank the hole in the shank push your pin all the way through until its flush and then youll have a 1 7/8-inch hitch ball on your shank. Now if you end up having to tow a different trailer with a larger hitch ball size like a 2-inch, you just remove that, take the 2-inch one, push on the side with the dimple, line it up with the hole, push it all the way until its flush, now you have a 2-inch hitch ball. So in a few seconds you went from a 1 7/8 to a 2-inch.Now the last item I want to talk about is the Etrailer.com Ball Mount Bag part number ETBMB. This durable bag will work great not only for ball mounts but for all your towing equipments such as tie down straps, pins, clips, locks. It has a strong handle, makes it easy to carry and it has a large zipper opening that runs the length of the bag which makes it easier to insert the ball mounts and other large items into the bag. It is made of a durable nylon construction which will provide many years of use. The zipper is a no-hassle zipper closure. It has the handle for transportation and Ill give you a few dimensions on the bag. The overall length will be 16 inches. The height on this bag would be 5 inches and the width on the bag would be 4 inches. And that should do it for part number EBMK4.


Customer Reviews

etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs - EBMK4

Average Customer Rating:  4.9 out of 5 stars   (103 Customer Reviews)


- EBMK4
by:

Highly recommend. Easy to install, the installation videos were really helpful. It delivered really fast and the PRICE was GREAT! Thank you guys! 430868



- EBMK4
by:

Used a few times. Still working fine. the steel balls got rusted relatively quickly. 600801


Comments
Because of the metal to metal friction applied to the trailer ball from the inside of the coupler, the chrome plating will be worn away. A thin coat of grease would provide some protection against corrosion.
-- Mike L - 01/28/2019

48998

- EBMK4
by:

What can I say, It works, It is easy to swap the ball, and has a nice bag. It does feel slightly loose in the hitch, So I am sure it will bang around. Honestly though that doesnt bother me! 775360



- EBMK4
by:

Quick delivery and great quality 493834



- EBMK4
by:

Excellent purchase! The price was right and great value. Shipping was unusually quick. I got my shipment in 3 days and was pleasantly surprised... 441690



- EBMK4
by:

Everything that I ordered came quickly and in place. The video was very helpful in install hitch. 433975



- EBMK4
by:

The hitch, wiring kit, and equipment all arrived in a timely manner. The instructions were very easy to follow, and I was able to get it bolted on with the help of my friend in less than an hour. Wiring instructions were clear and worked just fine. Haven't towed anything to test the ground, but I'm confident it will work great. 426270



- EBMK4
by:

The hitch was delivered on time as scheduled. It looks great and will fit the van perfectly. I will provide a follow up post once it's installed and functional. This is my 5th hitch from etrailer and i wouldn't buy from anyone else. Thanks etrailer! 423502



- EBMK4
by:

Very good product fit perfect on a 2012 jeep patriot Thanks etrailer! 421155



- EBMK4
by:

WOW! What can I say? Easiest install ever! I called ahead of time and spoke with Katie about what I needed. She confirmed what I wanted would work with my van. I'm in the shipping business. The bar arrived in mint condition in a double wall box with the accessories boxed separately. After removing the hardware, reading the instructions and watching their video online, I went to work. The whole thing took less than 20 mins and I did not have to remove the exhaust. I actually used it to help hold the bar up. It took longer to remove the mud guard and rear body molding than to install. It is heavy, weighing in at about 65lbs but I did not even have to use a jack on the van. I'm very happy with my purchase and can now put bikes on the back of the van rather than in the van. I can tow our Cub Scout trailer and hall my sons football teams gear with the optional rear carrying racks. I also love the fact that the bar hides about 6" behind the bumper preventing injuries to the shins. The price was cheap and the install a breeze. 418345


Comments
Love em
Darren B - 08/10/2018

42146

- EBMK4
by:

Product received was of great quality and value and was delivered on-time. 407996



- EBMK4
by:

Delivered on time; easy to install; and very reliable on a cross-country drive! 407745



- EBMK4
by:

Perfect fit, no hassle to install, works just like one off the factory line. :)~ This online company has some of the best customer service I have ever dealt with, and we all know customer service is tough to find in this day and age. Low prices and great products. I highly recommend etrailer.com! 406971



- EBMK4
by:

This installation couldn't have been easier. Product came exactly as advertised, and the video was helpful and clear. 398085



- EBMK4
by:

Good kit for trailer owners.. 300537



- EBMK4
by:

Shipped quickly with tracking information. Parts were exactly what I ordered. No problems. Thank you. 296936



- EBMK4
by:

We received our Honda CRV kit very quickly, took about a week to get it into the mechanic for installation. He said it went in very quickly and easily, used it for the first time yesterday and it was exceptional! Very easy to take the hitch in and out, comes with a carrying kit for the extras to store away, light kit is simple to use and hook up. My wife easily put the hitch and ball on herself! Would definitely recommend the company and product to anyone looking to add one to their SUV! 293463



- EBMK4
by:

Beyond impressed with the versatility of this product. Makes changing between ball sizes so easy, plus I don't have to carry 2 or 3 bulky ball mounts around. Great product! 286387



- EBMK4
by:

I don't think think the Hulk could bend this thing. 280637



- EBMK4
by:

I like this because I can keep it in the truck under the seat 273376



- EBMK4
by:

The item came as expected. Easy to order and easy to select the right product for our van. Can't wait to try it out. 254421



- EBMK4
by:

great product - easy installation 224424



- EBMK4
by:

Nice package at a fair price. The only thing I would like to see in this kit would be a receiver lock instead of the pin. If you plan to tow multiple trailers with different ball sizes this is a must, so you don't have to have different receivers. 215940



- EBMK4
by:

Love that heavy duty bag to put all accessories together. 206861


Comments
Its perfect, thanks for great product
Hana N - 06/23/2016

18900

- EBMK4
by:

Excellent service and fast delivery 200440


25
103
Show More Reviews

Ask the Experts about this etrailer Trailer Hitch Ball Mount

  • Choosing a Ball Mount for 2011 Mercedes GLK 350 With Draw Tite Hitch
    In order to choose the right 2-ball mount for your 2011 Mercedes GLK 350, there are two measurements you'll need to know. The first one you already have, which is the 13-1/2 inches from the ground to the top of your receiver. Next, you'll just need to measure from the ground to the bottom of your coupler. If the height of your hitch receiver is higher, you'll need a mount with that amount of drop; if your coupler's height is greater, you will need a ball mount with that amount of rise....
    view full answer...
  • Ball Mount Kit To Allow 17 inch Tall Trailer to Be Towed Level with 2015 Dodge Grand Caravan
    When we installed the hitch part # 75579 on a 2015 Dodge Grand Caravan we found that the hitch height from the ground to the top of the hitch opening was 12-3/4 inches. To allow a trailer with a 17 inch coupler height to be towed level you would need 5-1/4 inches of rise. So instead for a ball mount you would want the part # 4282. Then for hitch balls part # A-90 for a 2 inch ball or part # 19286 for a 2-5/16 inch hitch ball.
    view full answer...
  • Options on How to Fix Loose Ball Mount
    I have just the thing to fix a loose ball mount or drawbar. The Anti-Rattle Hitch Pin, # SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount. The No-Rattle Trailer Hitch Wedge, # 93347, wedges itself between the receiver and ball mount to take up play and eliminate rattle.
    view full answer...
  • Best Trailer Brake Controller and Trailer Wiring Harness for 2020 Honda Odyssey
    Draw-Tite Trailer Hitch Receiver # 76171 and Ball Mount Kit # EBMK4 are great initial choices so you can get towing with your 2020 Honda Odyssey. To complete a safe towing set up, you do need a harness and brake controller, and the best wiring harness is the T-One Vehicle Wiring Harness # 118781 because it is the most reliable wiring harnesses for your Odyssey. You will also need the Universal Installation Kit for Trailer Brake Controller # ETBC7 for installation of these controllers. As...
    view full answer...
  • Needing a 2-5/16 Convert-A-Ball Hitch Ball for the EBMK4 Ball Mount Kit
    I found what you need. The Convert-A-Ball Interchangeable Ball for 2-5/16 # 600B will be the item that you will need for your ball mount kit.
    view full answer...
  • Recommended Trailer Hitch Compatible with 2018 BMW X3
    For your 2018 BMW X3, we have a couple different hitch options. We have the Draw-Tite # 76226 and the Curt # C13387. Both install in the same manner so I have attached a couple photos to help you with the installed appearance. Either of these options will work well with a bike rack or other accessory. If you will be using this hitch for light towing, I also recommend the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with Install Kit # 119190KIT, and the etrailer.com...
    view full answer...
  • Trailer Hitch Receiver Fit For 2019 Mazda CX-5 Grand Touring
    I can confirm for you that each of the trailer hitches that fit a 2019 Mazda CX-5 absolutely fit your Grand Touring model. The best option is going to be a Class III model with a 2 inch receiver, and the fits are: - Draw-Tite Max-Frame Trailer Hitch Receiver # 76138 - Curt Trailer Hitch Receiver # C13315 - etrailer.com Trailer Hitch Receiver # e98902 Of these three, I really like the Draw-Tite because of its quality and the fact it has the highest-rated capacities at 4,500 lbs towing...
    view full answer...
  • Trailer Hitch and Wiring Harness Recommendations for 2020 Honda Odyssey
    We can help you with that. I have two hitches to recommend, the etrailer brand # e98855 and the Draw-Tite # 76170. The primary difference between the two is that the crossbar area of the Draw-Tite hitch will be concealed behind the rear bumper fascia, with only the receiver tube being visible. Most folks would prefer this option, however because the hitch installs behind the bumper fascia, installation is much more time consuming. The etrailer brand is much easier to install, but will be...
    view full answer...
  • Trailer Hitch Fit for a 2020 Acura RDX A-Spec
    Draw-Tite has no fit exclusions for the A-Spec, so they consider the # 76268 hitch to be a fit. I've spent a bit of time looking at photos of the rear of the standard RDX versus the A-Spec model, and haven't seen too much of a difference. Usually the two factors are a different exhaust or a lowered rear fascia. In doing the eye test, nothing jumped out anything that would prevent the hitch from fitting. If you'll be towing with your RDX, you'll need a few other items to complete your...
    view full answer...
  • Will a Draw-Tite Hitch for 2020 Kia Telluride Fit with 20 Spare Tire and What Is Height From Ground
    I'll start off by saying that the two stock tire sizes on the 2020 Kia Telluride are 245/60r18 and 245/50r20- which are both 29.6" in total diameter- so the hitch is not going to interfere with your spare tire as long as it's the 245/50r20 tire and not larger. When it comes to the height of the hitch from the ground, the hitches that we've installed on the 2020 Kia Telluride like the Draw-Tite # DR24FR are coming in around 15-1/2" from the top of the receiver to the ground. This measurement...
    view full answer...
  • Parts to Equip 2015 Honda Odyssey to Tow 2017 Winnebago Micro Minnie 1700BH Travel Trailer
    Winnebago's 2017 Micro Minnie 1700BH single axle travel trailer has a gross weight (GVWR) of 3800-lbs which is the most the trailer can weigh when loaded up for a trip. This means full water and propane tanks, all your food and supplies in place, etc. The towing spec for the 2015 Honda Odyssey shows a maximum allowable trailer weight of 3500-lbs. This towing capacity presumes the car has only 2 occupants and the capacity drops as more passengers and cargo are added to the vehicle. If...
    view full answer...
  • Trailer Hitch and Towing Accessory Recommendations for 2020 Acura RDX
    We do indeed offer a 2 inch receiver hitch for the 2020 Acura RDX, the Draw-Tite # 76268. This hitch is compatible with your vehicle, but in order for the spare tire to remain in its original position under the vehicle after the hitch is installed, the spare tire must be on an 18 inch or smaller wheel. The hitch includes all the needed installation hardware, but if you'll be towing with the hitch, you'll need a wiring harness, a ball mount and a trailer ball. For the harness, use # 118804...
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2015 BMW X1
    On Both the Curt trailer hitch # C13140 and Draw-Tite hitch # 75761 the faces of the receivers are just about flush with the rear of the vehicle. Take a look at the installation videos I have linked so you can see how each hitch looks on a 2015 BMW X1. Please note that the trailer hitches only fit models of the 2015 BMW X1 that have the panoramic sunroof. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise...
    view full answer...
  • Complete Towing Setup for 2016 Mazda CX-5
    Draw-Tite Class III hitch # 76138 is a good choice for your 2016 Mazda CX-5 since it offers a higher weight capacity than Curt hitch # C13315. Please note that Curt does NOT require use of their support strap # 18050 with this hitch although they do require it for some other hitches. For a 4-pole wiring harness you can indeed use Tekonsha kit # 118563 which is compatible with your LED lighting. This wiring can be converted to the 7-way type needed for a brake controller by adding kit...
    view full answer...
  • Trailer Hitch & Wiring Harness for 2008 Infiniti FX35
    The Cequent Group that also includes other brands like Draw-Tite and Tekonsha discontinued the Hidden Hitch brand name recently. But we do have a confirmed 2-inch Class III hitch fit for your 2008 Infiniti FX35, the
    view full answer...
  • Trailer Hitch Recommendation for a 1966 Ford F-100 With a Standard Bumper
    I have included a picture of what a deep drop bumper is going to look like for you. If your bumper looks more like the standard bumper, pictured in the FAQ I have linked for you, then you do not have the 10 inch bumper. You would then need a trailer hitch that is designed for the regular bumper, like # 41001. I have included a link to the installation details for both hitches. I also recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set,...
    view full answer...
  • Recommended Trailer Hitch for a 2015 Lincoln MKC with 2 Inch Receiver Hitch
    Trailer hitches for your 2015 Lincoln MKC have only been available since recently. For your 2015 Lincoln MKC, the trailer hitch I recommend is the Curt Trailer hitch # C13194. The weight capacity is 3,500 pounds and has a tongue weight of 525 pounds. It's also a Class-III hitch. If you plan on doing any towing, the custom fit wiring harness is the Curt wiring harness part # C56262. The ball mount kit I recommend is # EBMK4. The ball mount kit comes with a ball mount, interchangeable...
    view full answer...
  • Hidden Hitch Recommendation for a 2009 Subaru Legacy Sedan
    The Hidden Hitch # 75560 that you referenced would be the correct hitch for your 2009 Subaru Legacy Sedan. This rack will fit all model 2008-2009 Subaru Legacies. I attached installation instructions for this product for you to check out also. If you plan on doing some towing you may be interested in the following products to complete your setup: Tow Ready Wiring # 119179KIT (installation instructions and installation video attached) etrailer Ball Mount Kit for the 2009 Subaru Legacy...
    view full answer...
  • Is Curt Hitch C13294 Compatible with Active Curve System on 2017 Mercedes GL350
    Thank you for bringing this to our attention. The Curt Trailer Hitch Receiver # C13294 is in fact compatible with your 2017 Mercedes-Benz GL350 with the Active Curve System. It appears the Draw Tite Hitch # 76141 is not compatible with the Active Curve System and the information was erroneously rolled over to the Curt hitch. This information has been corrected. To complete your trailer towing package, you may consider the following products: ZCI Circuit Protected Vehicle Wiring...
    view full answer...
  • Recommended Class III Trailer Hitch for 2008 Infiniti FX35
    We do have a 2-inch Class III hitch fit for your 2008 Infiniti FX35 and it comes from Curt Manufacturing, part # 13558. This is the only hitch option we have for your car at this time. This hitch bolts on using included hardware and its installation on a 2007 FX35 is shown in the linked video. If you plan to use the hitch to handle a 2-inch bike rack or cargo carrier you will need to use Curt's stabilizing strap # 18050 to help support those loads; this is required for Curt's warranty...
    view full answer...
  • What Trailer Hitch and Wiring Will Fit a 2011 BMW X3
    Yes, the CURT Trailer Hitch, # C13316, is designed to fit the 2011 BMW X3. I have included a link to the installation instructions for you to view. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # EBMK4, which comes with a ball mount, interchangeable ball set, pin and clip, and a carrying bag. For trailer wiring, use # 119190KIT. I have included links to the installation details and a video showing a typical installation.
    view full answer...
  • Hitch Recommendation for 2005 Ford F-150 Long Bed
    The Draw-Tite Class III 2 Inch Hitch, part # 41549, that you have referenced will fit your 2005 Ford F-150 long bed. This hitch has a gross towing weight capacity of 6,000 lbs and a tongue weight capacity of 600 lbs. I am including a link to the installation instructions on the Draw-Tite hitch. The # 51020 hitch is listed as a Pro Series hitch that fits 1997 to 2004 Ford F-150, so it is not designed for your 2005 vehicle. If you will be towing with this hitch I would also recommend...
    view full answer...
  • Trailer Hitch, Wiring Harness Kit and Related Towing Components for 2016 BMW X3
    We can help you with a hitch, wiring and the related items needed to tow a rental trailer with your 2016 BMW X3. I recommend the higher-capacity hitch option which comes from Draw-Tite, their hitch # 76226, since it offers a 750-lb tongue weight (TW) rating as compared to 350-lbs for the Curt # C13316. TW is downward force on the hitch from the trailer's weight; you should be able to find out from the rental company what the specific trailer's empty TW is to confirm it will be compatible....
    view full answer...
  • Recommended Hitch for Trailer Hitch Mounted Accessories on 2020 Honda Odyssey
    With a minivan, the hitch tongue weight clearance and its ground clearance are the two main things you'll need to contend with regarding using hitch mounted accessories. The Draw-Tite Class III receiver, part # 76170 features a crossbar that is mainly concealed behind the bumper fascia. It has a respectable 525 lb tongue weight capacity. It also has the best ground clearance of the Class III hitches at approximately 12-1/4 inches between the ground and the underside of the receiver tube....
    view full answer...
  • Comparing the Draw-Tite Trailer Hitch # 75600 and the Curt Trailer Hitch # 13077 for a 2015 BMW X5
    Although the Draw-Tite Trailer Hitch, part # 75600, and the Curt Trailer Hitch, part # 13077, are both great hitches that both have a 6,000 lb max Gross Trailer Weight and a 600 lb max Tongue Weight, I recommend going with the Draw-Tite # 75600. The reason that I recommend the Draw-Tite # 75600 over the Curt # 13077 is because the Curt hitch requires that you use a stabilization strap, like part # 18050, for any non-trailer loads like bike racks and cargo carriers per the Curt warranty....
    view full answer...
  • Trailer Hitch Recommendation for a 1987 Chevy C/K 1500 With a Deep Drop Bumper
    A deep drop bumper is a bumper that hangs further below the frame than a standard bumper. Check out the photo that I attached showing a deep drop bumper compared to a standard bumper and a step bumper. We have three frame mount trailer hitches that will work with a deep drop bumper on your 1987 Chevrolet C/K 1500. You could install the Curt Hitch, # C13099 or the Draw-Tite Hitch, # 41504. These are all Class III trailer hitches that have a towing capacity of 5,000 lbs and a tongue weight...
    view full answer...
  • Hitch Recommendation for a 2009 Acura RDX
    For your 2009 Acura RDX I like the Draw-Tite Hitch # 75563. This is a Class III hitch that will have plenty of capacity for your small trailer but will also allow you to carry a much larger trailer in the future. The capacities for this trailer are 400 lbs tongue weight and 4,000 lbs total trailer weight. Draw Tite has a great reputation and is one of the best hitch manufacturers on the market. If you want to see a picture of this hitch installed on a similar vehicle check out the...
    view full answer...
  • Trailer Hitch for 2018 Subaru Crosstrek for Using Hitch Cargo Carrier and Towing Utility Trailer
    You are correct that both 1-1/4-inch and 2-inch hitches are made for your 2018 Crosstrek, but we always recommend going for the 2-inch size for their usually higher weight capacity and broader compatibility with accessories like cargo carriers and bike racks. There are simply more options for these items in the 2-inch size. I suggest the Draw-Tite 2-inch Class III hitch # 76209 because it offers the highest tongue weight rating of any hitch made for your car, 675-lbs, and because it...
    view full answer...
  • Trailer Hitch Recommendation for a 2012 Toyota Sienna for Trailer Towing and Bike Rack
    Since you want to tow a trailer and use the hitch for bikes, I recommend a Class III trailer hitch for your 2012 Toyota Sienna. A Class III trailer hitch with a 2 inch receiver is going to afford you more options for accessories than a smaller hitch. The receiver on any of the available trailer hitches will be directly below the rear bumper on the van, including the Curt hitch, # C13105, that you have referenced. Because the vehicle sits so low to the ground, ground clearance can be...
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video by:
Kathleen M
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.