etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 7,500 lbs

See what our Experts say about this etrailer Trailer Hitch Ball Mount

• Recommended Trailer Hitch Receiver For a 2024 Hyundai Palisade Calligraphy
  If you are concerned with the budget our etrailer Trailer Hitch Receiver # e95ZR you found is a great option for your 2024 Hyundai Palisade Calligraphy. If you want the best looking I would go with the Stealth Hitches Hidden Rack Receiver # 391HYUNPALIS19 since you can easily remove the receiver shank when not needed and maintain the clean factory appearance. To tow with the Stealth Hitches receiver they have the Towing Kit # SH28GR which contains wiring and a ball mount with a 2" ball....
  view full answer...
• How to Determine Correct Ball Mount Drop For Toyota Highlander With 2 Inch Hitch
  Hey Lisa, So while I wouldn't' be able to tell you the exact drop you need for your ball mount when towing with your 2019 Toyota Highlander, but I can tell you how to determine the right one. It's actually really easy as you just need to measure from the ground to the top of your Highlander's hitch, and then from the ground to the bottom of your trailer's coupler. For example, if you measured 17 inches from the ground to the top of your Highlander's hitch, and 15 inches from the ground...
  view full answer...
• Recommended Hitch and Wiring for 2022 Subaru Outback
  Hello Chan; for a hitch that fits your 2022 Subaru Outback I recommend the etrailer Hitch # e25TR. This is a Class III hitch with a 2" receiver and a bolt-on installation. It has a concealed cross tube, so only the receiver is visible, and a matte black finish. The hitch also features a limited lifetime warranty. For wiring, you need the Curt T-Connector Vehicle Wiring Harness # C56040. This plugs into the connection point in the rear cargo area and will give you a 4-way to power your...
  view full answer...
• What Hitch Ball Size For 2023 Lance 1475 Travel Trailer
  Hey Mike, The hitch ball size should match the trailer's coupler, and per Lance, your 2023 Lance 1475 travel trailer uses a 2" hitch ball. So you'll just want to match the diameter of the hitch ball's shank to that of your ball mount. For example, if your ball mount has a 1-1/4" diameter hitch ball hole you could use the 2" Hitch Ball # CB26C, or if it has a 1" diameter hole you could use the 2" Hitch Ball # SC23-C. You could also use a ball mount that has a 2" ball already installed,...
  view full answer...
• Best Trailer Hitch and Wiring for 2024 Kia Telluride SX X-Line
  Hello Ron; the best trailer hitch for your 2024 Kia Telluride SX X-Line is the etrailer # e45ZR. All of the hitches have a similar design and specs but the etrailer hitch stands apart with its matte black finish. This gives it an OEM look and also helps hide inevitable dirt and scratches. Since you have the SX with LED taillights the correct wiring harness is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C29ZV. I'm assuming you're towing so you will also...
  view full answer...
• Will etrailer Hitch Fit 2024 Hyundai Palisade
  Hello Roberto; the etrailer Trailer Hitch Receiver # e95ZR will fit your 2024 Hyundai Palisade. This hitch has a bolt-on installation and comes with a limited lifetime warranty. If you plan on towing you will also need wiring and a ball mount. The Curt T-Connector Vehicle Wiring Harness # C43FV will give you a 4-way to power your trailer's signal lights. If you want to add a 7-way you can use the Tekonsha OEM Replacement Vehicle Wiring Harness # TK64CR instead. For a ball mount, check...
  view full answer...
• How to Find Out What Hitch Size is Installed on Your Vehicle
  Hey Jen, thanks for reaching out! To figure out what hitch receiver size you have on your vehicle, all you have to do is measure the inside height and inside width. If you check out the attached photo you'll see what I'm talking about. I'm also attaching a link to our hitch receiver FAQ page that goes into a bit more detail if you're interested. If you let me know what size hitch receiver you have as well as what you plan on using it for, I'd be happy to help out any other way that I can!
  view full answer...
• Recommended Trailer Hitch for 2024 Ford Maverick
  Hello Albert; for your 2024 Ford Maverick I recommend the Curt # C84BR. This is a Class III hitch with a bolt-on installation and a limited lifetime warranty. It has a max gross trailer weight of 4,000 lbs and max tongue weight of 600 lbs. For an installer, check out the link below for a list of local installers near Portland, TN. If you're planning on towing you will also need wiring and a ball mount. If you want to add a 4-way you can use the Curt # C59DR or for a 7-way the Tekonsha...
  view full answer...
• Availability of Class III Hitch and Wiring For 2021 Jeep Compass Limited
  Hello Dan; we do have a Class III hitch and wiring for your 2021 Jeep Compass Limited. For the hitch I recommend the etrailer # e48AR. All of the available hitches have a similar design but the etrailer hitch stands apart with the matte black finish. This gives it more of an OEM look and also helps hide dirt and scratches. The correct wiring harness is the Curt T-Connector Vehicle Wiring Harness # C56369. This plugs into the connection points behind your tail lights so it won't be anything...
  view full answer...
• Components Needed To Tow A Malone LowBed MicroSport Trailer With A 2017 Jeep Cherokee Trailhawk
  Hi Coleen, In order to tow the Malone LowBed MicroSport Trailer # MPG464-LB you'll need a trailer hitch receiver, 4-pole trailer wiring harness, and a ball mount with a 2" hitch ball. If you don't have one or more of these components then I have the following recommendations: Trailer Hitch: etrailer Trailer Hitch Receiver # e62TR. Wiring: Pollak # HM40975-11933. This is for models with the factory tow package and would plug into a connector at the back of the vehicle for a quick and...
  view full answer...
• Trailer Hitch Ball Mount For 2" Trailer Coupler That Sits Than Toyota 4Runner Receiver
  Hello Lathaniel, we have just what you're looking for with our etrailer Ball Mount w/ Pre-Torqued 2" Ball # e67DR. It only has 2" of drop so that should allow your trailer to sit level; also this ball mount is ready to go and you won't have to worry about trying to install the ball and torque it down to an insane amount of torque. It's also matte black so it blends in well, and has a strong black nickel coating which protects the hitch ball more than chrome or raw. Since you want an anti-rattle...
  view full answer...
• Availability of Class I Hitch for 2024 Ford Maverick Hybrid
  Hello Stephen; all of the hitches available for your 2024 Ford Maverick Hybrid are Class III like the Curt # C84BR. To use your bike rack you can add a reducer like the # e58YR. The only issue with an adapter is that it will cut the capacity of the hitch by 50%. I doubt this will be an issue since you have a Class I bike rack. I'm sure the tow dolly has a coupler so all you will need for that is a ball mount that fits a 2" receiver like the # e67DR.
  view full answer...
• Best Hitch for 2020 Ford Escape Hybrid
  Hello Bob; we have two hitches available for your 2020 Ford Escape Hybrid, the etrailer # e89YR and the Curt # C23FR. The design and specs are the same so it really comes down to a preference on the finish between the two. I prefer the matte black on the etrailer hitch since it has more of an OEM look. This also helps to hide dirt and scratches. Since you will be towing you will also need wiring and a ball mount. The Curt # C75CR will provide you with a 4-way to power your trailer's signal...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?