1. RV Camera System
  2. Rear View Safety Inc
  3. Backup Camera
  4. 7 Inch Display
  5. Distance Grid Lines
  6. Mirrored Image
  7. Night Vision
Rear View Safety Backup Camera System - 2 Camera Setup

Rear View Safety Backup Camera System - 2 Camera Setup

Item # RVS-770614
lowest price pledge
Our Price: $383.99
RV Camera System
This item qualifies for Free Shipping
Shipping Weight: 9 lbs
Quantity: 
In Stock
Rear View Safety Inc Hardwired RV Camera System - RVS-770614
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Lowest Prices for the best rv camera system from Rear View Safety Inc. Rear View Safety Backup Camera System - 2 Camera Setup part number RVS-770614 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (7)
  • Q & A (23)
  • Videos (2)
  • Photos
  • Why etrailer?

Rear View Safety Inc RV Camera System - RVS-770614

  • Backup Camera
  • Rear View Safety Inc
  • 7 Inch Display
  • Distance Grid Lines
  • Mirrored Image
  • Night Vision
  • Hardwired
  • Below Rear Clearance
  • 130 Degrees
  • Dashboard Pedestal Mount


  • Rear View Safety backup camera system
  • 7" Digital LED color monitor
    • Distance grid lines
    • Mirror image capability
    • Power harness for connecting DVD player or other cameras
    • Automatic system switch
  • 2 Color CCD backup cameras
    • 130-Degree viewing angle
    • 50' Infrared night vision
    • IP69 Rated - keeps out dirt and moisture
    • Shock resistant with 20G vibration and 100G impact rating
  • Includes all wires, connectors, and mounts
  • 1-Year warranty


RVS-770614-NM-01 Rear View Safety Backup Camera System - 2 Camera Setup

Replaces Rear View Safety RVS-770614 and RVS-770614-NM

Installation Details RVS-770614 Installation instructionsAlternate Instructions RVS-770614 Installation instructions



Video of Rear View Safety Backup Camera System - 2 Camera Setup

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for RVS Rear View Safety Backup Camera System Review

Hi there, RVers. Today we're going to be taking a look at RVS' rear view safety backup system. These are available in different configurations up to four cameras. We've currently got the four camera system installed on our RV. The four camera system comes with a front, a rear, and two side cameras. Here at the back we've got our two rear cameras.

Now, the system is designed for one of these to go on the front, but you can mount the front camera wherever you really like. My friend Tom's dad mounts his over the door of his RV so he can watch his camp site and use it as a security camera.Right now you're looking at the one we've set up low at the back of our vehicle to make it easy when backing up for hooking up this flat tow setup. When we toggle to the next camera, we've now got our high mounted rear camera that'll allow you to see your entire flat tow setup pulling behind you. This is also nice for pulling a trailer and you want to monitor your cargo in the back. We also have a left and right side camera system, which makes it easy when parking and backing up where you need to see down the side of your RV.If we continue to toggle through, we'll have multiple display modes up.

Here, we have both of the cameras we have installed in the rear. Here, we have both of our side cameras. You've got a three camera set up here with the rear and both the sides, and a four channel setup, where you have both the sides. And we have two rears here, but it could be your front and rear.It's just another layout with all four cameras, and we've circled back around to our first camera, which is our low rear camera. These display options will vary depending on how many cameras you have.

The monitor system will accept up to four.This is our side camera on our driver's side. All of the cameras feature infrared lights to assist its vision in low light settings. The nice thing about the front rear cameras is they come with a sun shade to assist its vision in high light settings, and the brackets that come included with those will allow the camera to swivel both up and down. The screws on the side can be loosened and tightened to allow you to make that adjustment.Here's our passenger side camera. All the cameras that come included with the kit are going to be vibration and impact resistant.

Your side cameras will have two mounting options. You'll have the adhesive backing that we chose to install on ours, which gives it a nice flush mount, which gives it a real good factory look. There are also a bracket set up that you can install on these. It will have it stick out about an inch when the brackets installed, but what's nice about the brackets is that the cameras will be adjustable so you can tweak those to the best vision option that works for your RV.Three out of the four cameras that you can hook up to the monitor system will have trigger wires available. These trigger wires, when 12 volts as applied to them, will turn on that specific camera. So on our system here, we hooked our side cameras up to our front blinkers, so that way whenever I turn the blinker on, that 12 volt signal from the blinker is sent to our system and it turns those on. We also have one hooked up to our reverse lights for the rear camera. Here, you can see it activating as I turn my blinkers on.There's a slight delay when you turn the blinker off before it returns to the normal position, which is usually your front camera or camera one. And here's our left. As long as the blinker remains active, this camera will stay on. Same goes for reverse.Now, when you put your vehicle in reverse, it automatically switches to your reverse camera. Here, you would see it on. When it gets this trigger signal, that will inaudible 00:03:33 switch to that camera. inaudible 00:03:34 grid lines up, making it easy to back into a parking space. And it also turns on the audio circuit. You're hearing me through the camera system right now. This is nice if you've got anybody in the back guiding you into your spot. You'll be able to hear the directions.This camera system's not only great for increasing your confidence and safety as you're driving down the road by providing you with vision all around your RV. It also is great for a security system, so when you get to your destination, you can monitor your camp site and your belongings, in the event that any animals may come along to try and get some food, or you have any unwanted guests that want to troll into your camp site.The menu button next to the power button will pull up the menu where you can adjust all the display output options on your camera here. This is going to vary between picture quality, brightness, as well as which cameras are currently being displayed. In the bottom right, you can also reverse the camera. This gives you a few more mounting options. If the location that you want to mount it works best with the camera upside down, go ahead and place it upside down and then press the reverse button. Through the menu on the turn option, you can adjust it so that specific camera displays upside down all the time, which would be right side up for you.The unit also comes with a remote. This is nice if you're using it as a security system. I can be sitting here at the table, just inaudible 00:04:54 look around outside. We can cycle through all of our cameras and see that everything here at the site is a-okay.When comparing this other camera systems on our website such as the ones from Voyager, I found that the RVS system has a better audio quality coming out of it in comparison. However, I found that the Voyager has a little bit crisper picture. So if picture quality is better for you, then the Voyager might be a better option, but if you really are having trouble hearing the people behind you and you want those directions, the RVS system that we have here is probably a better option.Another difference between them is that the RVS cameras use a five wire connector, where the Voyager systems use a four pin connector. The four pin connector, I've found, is a little more common and is often pre-installed on many RVs, even if they don't have a camera system. So installing a Voyager system is often a little bit easier if the wiring is already run to the back, because routing the wiring can be some of the most time consuming parts. So if you can use the wire that already exists in the RV, it greatly decreases the amount of time for the installation.You'll want to begin your installation by determining what you already have on your RV. Some systems already have cameras mounted in the back, and may already have cameras mounted at the side, and they may already have camera wiring run through them.Once you determine what you have, then you'll want to determine where you want to put the cameras that come in your kit. We're going to be placing two cameras at the back. This kit's typically designed for one of those to go on the front, but our customer requested the other to be in the rear. And we're going to be mounting both the side cameras. There was already wiring ran for our camera through the back. There is wiring that comes in your kit if you don't have a wire that's already run.If you need to route your wiring, you're going to run that from your monitor to wherever you've mounted your camera. When routing your wiring, it's best to avoid any moving objects, such as your steering and suspension, and anything excessively hot, such as your exhaust. In a lot of cases, running it down and then underneath the vehicle back up and then inside is the easiest way to do it.For your front and rear cameras, you'll have a bracket that you'll need to mount. We're going to be mounting the rear. We're going to use the hardware that already existed on our RV. There is some hardware that comes with it, but depending on where you want to mount your camera, you may need to pick a more appropriate hardware for that application, whether that be wood screws or nut and bolts that are different sizes than what comes in your kit.We're going to mount the bracket by sliding our screws through the slotted holes on each side here in the back. And using a Phillips screwdriver for this hardware to tighten it down.Next, we're going to mount our camera into our mount there. It's not a bad idea, if you're mounting it up high on the back of the RV like we are here, to go ahead and, connect the electrical wire now. This way, just in case you drop it, it's not going to go all the way to the ground. So just line up. There's a couple little slots on each end. Line those up, so it only goes together one way. Go ahead and screw the locking nut together and then you can take the rubber protective covering and slide it over both.Now, it's optional, but there is a sun shield that comes with it. If you decide to use it, you simply just slide this over your bracket. I like to slide it on first. It's going to be held on by the same hardware that holds on the camera. I just find it a little easier to put that in place because it does a pretty good job of staying there. We'll now take our camera. We're going to line up the holes in the side, you have three holes on each side, with the hole in the center of our bracket, and the slots. We're going to start by doing the center hole to the center hole on the camera.Once you've got the bolt the center ones on on each side, and you can angle the camera to your desired position and then use the remaining hardware to put one on each side of that center one, locking it in place. You'll do that on each side of the camera. We can now push our wiring back up inside the motor home to hide it. We mounted our camera where cameras are typically mounted in the back, and a lot of RVs already have a location here to put one if they don't already have a camera, just like this vehicle did. But if you we're installing it in a place where there was no spot for it, you can drill a hole for your wiring, and I would recommend using an 11 16ths drill bit to make it large enough to fit your wiring and connector ends through there. That also happens to be a good size for the grommet that comes in the kit to poke up in there and seal up the hole you just drilled.To help get your grommet in place, you might need a small screwdriver to just poke the lip edge up in the hole as it is kind of a tight fit, but this is what we want, so that way it's a water-tight seal. We mounted our front camera here at the rear. Our customer wanted to use this as a closer camera towards this hitch. Hooking up this hitch mounted accessories and also backing up, hook this vehicle up for his flat tow setup.Your side cameras, so they're going to mount in a similar way. You do have brackets that will allow adjustment just like your rear and front cameras, but it also comes with a double sided adhesive pad that you can use. That's what we chose to use here, as it gives it a nice flush mount and it's just a little bit more appealing to the eyes using the flush mount.Once you've got all your cameras mounted and you've routed all your wiring up to the front of the vehicle, we now need to get our monitoring system hooked up. There's a harness that comes with your monitor and we're going to start hooking that up. The end with all the wires poking out of it that you see here, it's going to have all of your camera connections here, so if you routed your wiring inside, you can go ahead and connect all of your cameras to it. Those connect just like the ones in the back. And after you've connected them, you can cover them up with the rubber sleeve.You'll have a brown, a blue and a yellow wire that comes off of your harness. These are your trigger wires for your cameras. Your trigger wires will look for a 12 volt input, and when it sees one, it will automatically turn on the camera for that specific trigger wire. So you can see here this one's labeled channel four, channel three, and channel two.Channel one is supposed to be for your front camera. Channel two is designed to be your rear camera. Channel three is designed to be your left side camera, and channel four is designed to be your right side camera. So we've hooked channels three and four to our blinkers, channel three to the left front turn signal, and channel four to the right front turn signal. We just spliced right off of the bulbs for the turn signals, in order to get that 12 volt. So whenever we turn our blinker on, that blinker signal that's going to the bulb, making the bulb light up, is going here in flashing. Our system will detect that flashing and know, oh, that's your left turn, and it will automatically turn on the camera when it sees that left turn signal input.Same thing with our channel two. We hooked this to the reverse light circuit and brought it up here. So whenever we pull our vehicle in reverse, the 12 volts that was going to our reverse light is also going to our camera system. Once it sees the signal, it turns on the backup camera. You'll also then have a black and red wire that comes off this harness. Your black wire is ground, and you could hook this to any ground point. We went ahead and just used a ground stud located back behind our brake pedal. This will vary depending on your motor home, where you decide to mount it.And lastly, we have power. There's a couple of different ways you hook up power. You could hook it directly to the battery and that would power your camera system all the time. If you do have it hooked up to your battery all the time, you can turn the monitor off to save battery life, but there is still LEDs on it that will be lit up for the buttons, and over a long period of time, those could drain the battery.So what I've opted to do, instead of hooking it directly to the battery, we used a fuse tap to tap into a fuse that's only powered when the ignition's in the run position. This way the camera system turns on when you turn the key on. So if you are not planning to use it as a security system and you want to make sure that it's not going to drain your battery so you don't have to worry about it ever, this is a good option. You can pick up fuse taps here at etrailer.com.For the front camera, there is no trigger wire. If you want to select the front camera, you do so using the buttons on the monitor. Now, you can see here we've got a lot of extra wire. Depending on the length of your motor home, you may have a lot of wire like this too. This is a shorter motor home, so the excessive length that you get here, we can just bundle up and zip tie out of the way. I do however really like that you get so much cable length. This camera system will work with just about all RVs out there without needing additional extensions. Some of your longest ones may require them, but for your average and slightly larger sized ones, there'll be plenty here. So we're just going to take this and we're going to shove it under the dash and zip tie it up out of the way.Then pick out a location to mount your monitor. We've decided to put ours on the dash, a little bit on the passenger side, but close to center. And we've angled it towards the driver. It's a pretty large monitor, so placing it in the center and on the driver's side will likely obstruct the driver's view, so I do highly recommend putting it off towards the passenger side of it.There's a couple of different mounting brackets that you'll receive, to choose some different locations to mount ours. We used the dash mount, which has a double sided adhesive underneath, and there are a couple of holes in it where you can run some self-tapping screws down to further secure it to your dash.The other option you'll get is a wall or ceiling mount that you can put and be able to pivot and rotate it. This is nice if you've got the extra room so you don't have to worry about obstructing your windshield. However, on our particular RV here, there really just wasn't a good location. This kind of puts it a little too far back, makes it hard to see for the driver. You can't really go off to one side because it will interfere with our visors. But it is a good option if you do have the space.The only thing left to do is test it out. We've gone ahead and turned our key on. The system automatically powered up due to how we have it run. You can see here, we're currently looking at, this would be our front camera, but this, on our vehicle, is our lower rear mounted camera. You can cycle through the cameras with the button here, so you just want to make sure they all work. This is our backup camera, the high mounted one. We have our left and right side mount cameras as well.You can also watch multiple monitors at the same time when cycling through. Next, we'll test out our trigger wires. You'll want to try both your blinkers in reverse and make sure you've got those signals. As you can see here, whenever I flick the blinker switch, it switches to each side. And when we put it in reverse, we'll get our backup camera.And that completes our look at RVS' rear view safety backup system.


Customer Reviews

Rear View Safety Backup Camera System - 2 Camera Setup - RVS-770614

Average Customer Rating:  5.0 out of 5 stars   (7 Customer Reviews)


- RVS-770614
by:

Recieved my etrailer order yesterday. Received it very quickly, I ordered two items, a back-up camera system and sensor set-up. Very pleases with what I have seen of it. Will install it this weekend, can't wait. 356626



- RVS-770614
by:

I bought a two camera setup, works great! One camera on the 5th wheel hitch, and one on the rear of the trailer. The camera on the trailer is setup to be on all the time I am driving. It really helps for backing up, but it is even better on the road. You can see cars coming up on the trailer and see if they are going to pass. 414492



- RVS-770614
by:

Works very well day or night 843133



- RVS-770614
by:

The camera systems we purchase have been easy to install and use. 725671



- RVS-770614
by:

Lots of product options excellent website and fast parts delivery. 720043



- RVS-770614
by:

This 2 camera system gives me a full view of the road behind me as well as providing a closeup look at my toad. The backup guide-lines let me drive my 33' Southwind backwards with a trailer without any problem whatsoever.....and I can easily switch between the full-road or close-up modes to check on my trailer/toad when going through dicey road conditions. Very easy to hook up.....wire your power supply line and plug in the rest. 578082



- RVS-770614
by:

Haven’t used the camera system yet but it was fast on delivery. The cameras and components look like they are made very well. Customer service dept. works well for the consumer. Thanks and I will give a review when installed. 549086


7
7

Ask the Experts about this Rear View Safety Inc RV Camera System

  • Recommended In-Bed Camera System for 2020 Ford F350 With Existing Back Up Camera System
    It sure is possible! Take a look at the camera systems from GCH Automotive Systems. The camera is compatible with your existing camera system, but the specific camera you need will depend on the size (measured diagonally) of your factory monitor. Use # 3460001 for an 8 inch factory monitor, # 3460002 for the 4.2 inch factory monitor. The kits include a switch that lets you toggle back and forth from the tailgate camera to the in-bed camera as needed. If you don't have a reverse camera...
    view full answer...
  • Wired Rear View Camera System Recommendation for Rear of Travel Trailer
    To alleviate the possiblity of interference a wired camera setup will be your best option like you mentioned. For a single camera version of the kit you mentioned the Rear View Safety Camera kit part # RVS-770613-NM would be a great option. You'll also want the extension cable to use from the monitor to the rear of the vehicle like part # RVS-101N so that you can then have a quick disconnect when connecting or disconnecting your trailer. You can use any circuit you like as the trigger...
    view full answer...
  • Rearview Safety Backup Camera Kit Recommendation with Quick Disconnects for Use with Trailer
    There's actually a version of the Rearview Safety Backup Camera kit part # RVS-770614 that comes with a quick disconnect kit for trailer applications like what you mentioned. For that you'd want the part # RVS-770614-213 instead. I attached a picture of what the quick disconnects look like as well. These allow you to easily disconnect the camera wiring of the trailer from the vehicle.
    view full answer...
  • Recommendation on Dual Camera System for Truck and Travel Trailer
    There are options for you to have a dual camera system though there is not one available which will allow you to mount to a license plate and the rear of your trailer. Instead, I recommend using the Rear View Safety Backup Camera System - 2 Camera Setup # RVS-770614. The cameras are color with a viewing angle of 130 degrees while also giving you 50 feet of infrared night vision. The monitor is a 7 inch color monitor that has distance grid lines; the system is hardwired in and includes everything...
    view full answer...
  • 2 Camera Backup System Wiring Without Splicing Into Vehicle
    The Rear View Safety Backup Camera System - 2 Camera Setup # RVS-770614 simply needs a 12V power at the cameras and monitors. I'm happy to help with an alternative option for install, but want you to know you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I recommend looking it up online. If you simply want to get the 12V power, you can run a # 10-1-1 sold by...
    view full answer...
  • Could Backup Camera Activate with Brake Pedal
    If you wanted to wire up a backup camera to come on every time you put on the brakes it's definitely possible to do that and have it come on when you are in reverse. It might get somewhat annoying at night with the monitor coming off and on but it would just be a matter of running the two wires to the same circuit like you mentioned.
    view full answer...
  • Can Backup Camera be Wired to Something Other Than Reverse Lights so it is Always on
    You can wire a backup camera, like the Rear View Safety Backup Camera System # RVS-770614, to a different function so that it stays on all of the time. This is actually a common solution that even the manufacturers recommend for customers. If your tail lights turn on when you start the vehicle then running the wire to one of your tail lights for power is a very viable option. Running it to the brake light function is probably not the best solution as that means it will only receive...
    view full answer...
  • Available Multi-Camera Hitch Aligner and Observation Camera Systems
    Yes, since we have many types of backup and observation camera systems we can help you with a dual-camera model that will give you the kind of visibility you want for both hitching your trailer and safely backing it up. If you prefer a complete stand-alone camera system that includes its own viewing monitor then I suggest the Rear View Safety Backup Camera System # RVS-770614. This complete setup comes with a 7-inch color LED monitor, 2 moisture-resistant and shock-resistant color cameras...
    view full answer...
  • Does RVS Backup Camera System # RVS-770614 Have to Run to Vehicle Reverse Light Circuit
    The reverse light circuit is used as a trigger wire for installing the Rear View Safety Backup Camera System # RVS-770614 that you referenced. If you don't want to use that circuit you could use a switched circuit instead but the camera would not come on automatically which makes it less convenient. Tapping into the reverse light circuit won't void the warranty of the vehicle though. It does not draw any amperage from this circuit so the risk for damage is almost non-existent.
    view full answer...
  • Dual Camera Setup Recommendation for 2017 Honda Pilot for Eliminating Blind Spot
    Your best option would be the Rear View Safety Backup Camera System # RVS-770614. This is a dual camera setup that would allow you to put cameras wherever you needed them on your Honda Pilot so that you can eliminate blind spots as needed.
    view full answer...
  • Can Peak Performance Digital Wireless Backup Camera be Wired for Observation
    You can indeed wire the Rear View Safety Backup Camera System # RVS-770614 that you referenced to a different circuit like your license plate lights. This will allow the unit to power on with your running lights so that you can use it as an observation system instead of just a backup camera. This system includes a nice 7 inch LED color monitor and 2 color CCD cameras with 50 foot infrared night vision. I have attached the installation instructions along with a short video demonstration...
    view full answer...
  • Recommended Two Camera Observation System for Forklift Hyster
    For your forklift application, I recommend the Rear View Safety Backup Camera System - 2 Camera Setup # RVS-770614. This will give you the two cameras that are adjustable and include a sun shade and the monitor so you can get a better view. The cameras are hardwired and give you night vision for dark areas. The monitor also gives you the option of grid lines to assist. I've attached some videos to assist. The price is shown on the product page. The time to install will be dependent...
    view full answer...
  • What Circuit Should Be Used to Activate Rear View Safety System # RVS-770614
    If you wanted to use a switch to activate the camera of the Rear View Safety Backup Camera System # RVS-770614 you certainly could. It would be a matter of running the trigger wire to a circuit that has power like the battery of the trailer and then installing a switch there. Typically the easiest solution though is to use the running light circuit of the trailer wiring as the trigger circuit so that you can turn the cameras on easily whenever needed by turning on running lights or headlights...
    view full answer...
  • Do I Need to Wire in the Circuit Breaker When Hard Wiring Rear View Safety Backup Camera System?
    You are correct that the cameras on the RearView Safety # RVS-770614 have an inline 3 amp fuse for an added layer of protection for the electrical components. When it comes to the circuit breaker # 9510 that was mentioned when wiring into a switch like the # D16740, this is more of a precautionary measure to help protect the electrical components in the system, as well as the switch that is being used in the event of an electrical malfunction. I spoke with my contact at Rear View Safety...
    view full answer...
  • Multi-Camera Vehicle Observation Systems
    Most aftermarket camera systems are made as stand-alone devices, meaning that they are not designed to be integrated with other similar camera systems or with the built-in dashboard displays included in many vehicles. This is usually true even for two systems from the same manufacturer. The better option is to use a 2 camera system like the RVS # RVS-770614 which comes with a 7-inch LED color monitor that allows switching between the different camera signals. These systems appear on...
    view full answer...
  • Does the Backup Camera Mount On a Trailer Need Additional Support for Installation
    I have never personally heard of a rear view camera on a trailer falling off that was properly secured before due to road vibrations. That said, you shouldn't need any additional support or backing plates as the aluminum siding should hold just fine. If you like, you can replace the screws with bolts and then use nyloc nuts to hold them tight but I again don't really even think this will be necessary. If you follow the manufactures installation instructions for the camera system you should...
    view full answer...
  • Truck Bed Camera for 2017 Ford F-350 That Works on Factory Monitor
    There is absolutely a camera system that will work with the factory monitor on your 2017 Ford F-350 Super Duty, and the correct one will simply depend on the size of your factory monitor: - Truck Bed Cargo Camera for 8" Factory Monitor # 3460001 - Truck Bed Cargo Camera for 4.2" Factory Monitor # 3460002 Each of these cameras will install under your F-350's third brake light and comes with a switch kit so you can switch between your truck's back-up camera or this observation camera....
    view full answer...
  • Multiple Camera Observation System for 5th Wheel Trailer
    While there are observation systems that have multiple cameras, there isn't one at this time that has multiple cameras which all sync to a single smartphone or tablet. The Rampage Wireless Backup Camera for Smartphone or Tablet - iOS or Android # RA7710, for example, will only work with the single camera it comes with as opposed to being able to switch between cameras. For a camera system like that you would need something that is hardwired into a monitor such as the Rear View Safety...
    view full answer...
  • Observation Camera System for 2018 Ram Longhorn Laramie and Trailer
    Based on what you were checking out it looks like you are in need of an observation camera for your 2018 Ram Longhorn Laramie pulling a trailer, and we have exactly that. I strongly recommend the Rear View Safety Backup Camera System - 2 Camera Setup # RVS-770614 or for more viewing options, the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 because they give you a full range of viewing with a large 7 inch color monitor and night vision so you...
    view full answer...
  • Can Additional Camera be Added to the Hopkins Smart Hitch System # HM50002
    The alarm on the Hopkins Smart Hitch # HM50002 that you currently have can actually be muted via the button on the lower right part of the monitor. I do have some options for you to utilize an extra camera but it will involve adding a new system or swapping out what you have since the Smart Hitch is only compatible with one camera. If you don't want to get rid of the Smart Hitch but you do want to add a camera to your trailer then a great solution for you would be the Rear View Safety...
    view full answer...
  • Recommended RVS Backup Camera System with Large Monitor for Easy Viewing
    Our range of backup cameras appears on the page I linked for you. These include both wired and wireless systems that come with monitors of varying sizes. The one I often recommend is the Rear View Safety # RVS-770614 which I like because of its 7-inch Digital LED color monitor. This monitor is much easier to use than the fairly small ones found on other systems. When you need to see what's behind you with a quick glance the larger monitor really makes things easier. Plus this is a...
    view full answer...
  • Can Multiple Cameras be Used for the Rear View Safety WiFi Hitch Backup Camera System
    You are only able to pair one camera with one phone at a time with the Rear View Safety WiFi Hitch Backup Camera System # RVS-83112-WIFI. If you are wanting to connect multiple cameras to the same monitor then the Rear View Safety Backup Camera System # RVS-770614, which comes with 2 cameras, is a better route to go. This doesn't use a smart phone as a monitor which can be a good thing because if anything were to ever malfunction it is easier to troubleshoot hardwiring than a wireless...
    view full answer...
  • Can You Use 2 Rampage Wireless Backup Cameras On Same Smartphone
    You can use 2 of the Rampage Wireless Backup Cameras # RA7710 on the same smart phone, but in order to accomplish this you would need to close out the app and reconnect to the new camera each time you wanted to switch views. The other system that operates in the same manner, the Rear View Safety WiFi Hitch Backup Camera # RVS-83112-WiFi also operates like this, so you would need to connect to the WiFi of the other camera and then re-open the app to view the other camera. Unfortunately...
    view full answer...

Do you have a question about this RV Camera System?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv camera system for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv camera system information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Tyler C
Installed by:
Jeff D
Installed by:
David F
Video Edited:
Jacob T
Video by:
Dustin K
Updated by:
Mary E
Updated by:
Sarah W
Written by:
Daron K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.