1. Backup Camera
  2. Rear View Safety Inc
  3. Backup Camera Systems
  4. Wireless Signal
  5. Standard Camera System
  6. 4.3 Inch Display
Rear View Safety Wireless Backup Camera System - Cigarette Lighter Adapter

Rear View Safety Wireless Backup Camera System - Cigarette Lighter Adapter

lowest price pledge
Retail:$289.92
Our Price: $229.47
You Save: $60.45
Backup Camera
This item qualifies for Free Shipping
Shipping Weight: 1.66 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Call 800-298-8924 to order Rear View Safety Inc backup camera part number RVS-091406 or order online at etrailer.com. Free expert support on all Rear View Safety Inc products. Guaranteed Lowest Price and Fastest Shipping for Rear View Safety Wireless Backup Camera System - Cigarette Lighter Adapter. Backup Camera reviews from real customers.
  • All Info
  • Reviews (7)
  • Q & A (27)
  • Videos (1)
  • Photos
  • Why etrailer?

Rear View Safety Inc Backup Camera

  • Backup Camera Systems
  • Wireless Signal
  • Rear View Safety Inc
  • Standard Camera System
  • 4.3 Inch Display
  • Windshield Monitor
  • 130 Degrees


  • Rear View Safety wireless backup camera system
  • 4.3" TFT LCD color monitor
    • Plugs into vehicle's 12-volt accessory outlet for power
    • Easy suction cup mounting
    • Distance grid lines
  • Wireless backup camera
    • 130-Degree viewing angle
    • 9 Infrared lights provide night vision
    • No interference for up to 70'
    • IP68 Rated - keeps out dirt and moisture
    • 10G Impact rating
  • Includes all wires, connectors, and mounts
  • 1-Year warranty


RVS-091406 Rear View Safety Wireless Backup Camera System - Cigarette Lighter Adaptor

Item # RVS-091406

Installation Details RVS-091406 Installation instructions



Video of Rear View Safety Wireless Backup Camera System - Cigarette Lighter Adapter

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Rear View Safety Inc Backup Cameras and Alarms - Backup Camera Systems - RVS-091406 Review

Today we're going to take a look at the rear view safety wireless back-up camera system with the cigarette light adapter. This is a convenient and easy installation with the digital wireless back-up camera system. This back-up camera system is going to be installed as a supplement aid to your standard rear view mirror that already exists in your vehicle. The 4.3 sized monitor will connect straight to your cigarette lighter, comes with a nice suction cup mount for easy mounting. This part will include everything shown here on the table. It includes the monitor with the 12-volt power plug, the monitor mount, the back-up camera, the transmitter, the power cable, piece of double sided tape for the transmitter to mount to with, and a product installation manual. The monitor is a size 4.3 TFT LCD color monitor.

This will plug into your vehicle's 12-volt accessory outlet for power. The mount is a nice easy suction cup mounting, and if you'll notice the mount has many different positions you can put it in. If you just loosen this handle right here, you can see that it'll rotate. This will move up or down, so variable positions you could put it in. The way this suction works is, you see this lever right here If you push down on it, it'll form a suction to hold it into place, and flip it up to release it. You'll see this the way it attaches to the monitor, you just slide this right up in there and then tighten this large thumb screw down and it'll hold the monitor to the mount and then do all your adjustments.

Now the monitor itself has distance grid lines on it to let you know how close you are to an object. Now those grid lines are optional, they can be turned on or off. The wireless back-up camera, that's this right here, this will connect to your clearance light circuit in your vehicle. This has a 130 degree viewing angle. It is a digital wireless connection, which guarantees no interference up to 70 feet so that you get the best picture all the time. Also includes nine infrared lights in it to provide night vision up to 30 feet in total darkness.

The camera is IT68 rated, which means it keeps out dirt and moisture, and it is shock resistant with a 10G impact vibration rating. The transmitter right here with the antenna connector will connect to your vehicle's reverse light circuit. So what I'm going to do now, is I'm gonna go ahead and plug it into a 12-volt power supply. I just want to show you how the monitor looks. Now when you plug it in, you'll notice there's a red light that shows you have power and then what you'll need to do to turn the system on- there's a middle button right here, you just hold that middle button down for about three seconds. One, two, three.

Now you'll see your picture comes on. We're gonna zoom in here, and if we zoom in enough, there you can see the grid lines. The grid lines they are in color, the greens are farthest away, the yellow as you get closer, the red when you get too close. As I mentioned, you can take those off the screen if you don't want to see the grid lines. Go ahead and zoom back out. I'll go ahead and detach it from our power supply. That should do it for the review on the rear view safety wireless back-up camera system with the cigarette lighter adapter.


Customer Reviews

Rear View Safety Wireless Backup Camera System - Cigarette Lighter Adapter - RVS-091406

Average Customer Rating:  3.1 out of 5 stars   (7 Customer Reviews)


- RVS-091406
by:

Greg, the salesman, recommended this unit. I received it in two days. I wanted to pull my boat behind my camper and be able to see it. The unit was relatively easy to install (even for a 74 year old). I wired it to the running lights so it would transmit full time when the running lights are on. It does a great job. Thanks Greg! 562669


Comments
Still working great!
Robert - 09/07/2019

60911

- RVS-091406
by:

It is good when it works! It works for about 10% of the time and then cuts out and goes blue. I am only going 24' with it and have moved the transmitter to 5 different positions in the trailer and still same out come. Will be returning and going to a wired system that i hope is better! 861284



- RVS-091406
by:

Works 80% of the time. sometimes when I put my truck in reverse, the rearview camera does not come on. I usually have to recycle the on off button. Otherwise, it works as advertised. 818891



- RVS-091406
by:

Terrible product, it’s probably more distracting having the monitor on the dash because it is always turning off and on from losing the signal. I have tried moving the transmitter to different locations to try to get it to work better, with no luck. I wish there was a way to return this worthless product, but I am past the return date. I would not recommend this product. 817610



- RVS-091406
by:

I like this backup camera. I use it to monitor my boat trailer, which I pull behind my 33' 5th wheel trailer. The only negative I have found is the somewhat limited wireless range, between the sending unit and the monitor. Even though it claims there is no interference up to 70', my signal experiences periodic cutout when traveling on the road. I have the sending unit at the rear of my 33' trailer, which I pull with a quad cab Dodge with a 8' bed. I still wouldn't travel without it, but it can be annoying at times. 804345



- RVS-091406
by:

So far so good. 801368



- RVS-091406
by:

It was the item I ordered, sent very quickly and at the price listed. Thank you 326270


7
7

Ask the Experts about this Rear View Safety Inc Backup Camera

  • Camera System Options that Use the Factory Ram Uconnect Monitor
    Yes, we do have camera systems that you can use with the Uconnect system in what I can only assume is a Ram truck. For this, the only confirmed option we have is a truck bed camera like the Truck Bed Cargo Camera for Factory Monitor part # 3460015 which works on almost all newer Ram trucks with the factory reverse camera and 4.3, 5, or 8.4 Uconnect systems. If you want to use a different camera system then I do have options for you but you will need to make sure you have RCA jacks on...
    view full answer...
  • Solution for Adding Truck Bed Camera for Hooking Up 5th Wheel on 2019 Ram 3500
    Your best option for adding a truck bed camera for 5th wheel hookups is going to be with a more universal option like the excellent Rear View Safety # RVS-091406. Since there aren't any custom option available that will replace the 3rd brake light assembly on your 2019 Ram 3500 or work with its factory monitor in the cab, you will just need to get a little creative with the mounting process. This is why the Rear View Safety # RVS-091406 offers a really nice design for this application,...
    view full answer...
  • Where Does Camera of Rear View Safety Wireless Backup Camera System Usually Install
    The camera of the RVS Backup Camera Kit part # RVS-091406 that you referenced was mostly intended to mount under the rear hatch release of a vehicle like what you seen in the picture I attached. That said you can mount the camera in whatever orientation on your vehicle that works the best for what you need. On a 2004 Ford F-150 there isn't a great location for a camera like this so you'd be the happiest with the version that mounts using a license plate camera like part # RVS-778718N....
    view full answer...
  • Observation System Recommendation for 2019 Jayco Travel Trailer
    The Furrion kits are a bit more expensive than the other kits on the market, but they are worth the extra price. They have the best reception and easily the most reliable of all of the camera setups we've seen so they are worth the price. Plus since your trailer is pre-wired for this setup the install is going to be very easy and the other kits are going to require a bit more wiring. The best priced kit we have is the one with the 4.3 inch display part # FOS43TASF which will easily...
    view full answer...
  • Backup Camera Recommendation for 36 Foot Long 5th Wheel Camper
    A wireless system will work well for you if you do not want to run wires to the rear of your 5th wheel. I recommend a wireless camera such as the Rear View Safety, part # RVS-091406. In order to achieve the best signal, you will want to mount the camera transmitter and the monitor on the same side of the vehicle. For example, if you want the monitor on the driver's side of the vehicle, it will be best to mount the transmitter to the left side of the camper.
    view full answer...
  • Finding Trailer Taillight Circuit Used to Activate Camera of Backup Camera by Rear View Safety
    The running lights circuit you need for the activation circuit of the camera of the Rear View Safety Wireless Backup Camera System # RVS-091406 is going to be ran to the trailer taillights. If you look at your taillights there will be a circuit ran to them that has 12 volts when the headlights/running lights of the vehicle are on. You can use a circuit tester like the part # PTW2993 to test the wiring there till you find this circuit and then run it to the camera of the kit.
    view full answer...
  • Installation of Wireless Backup Camera # RVS-091406 on 2018 Forest River Palomino Solaire Camper
    The Rear View Safety Wireless Backup Camera System # RVS-091406 will allow you to run the camera all the time. You will simply wire the power of the transmitter to your running lights on your trailer instead of your reverse light function. This will allow the camera to stay active anytime the running lights of your trailer are on. It will give you a 130 degree viewing angle as well as 9 infrared lights for night vision. I recommend installing it higher than your bumper, but you...
    view full answer...
  • Best Location for Transmitter on Rear Safety Wireless Backup Camera System # RVS-091406
    The transmitter for the Rear Safety Wireless Backup Camera System # RVS-091406 should indeed be mounted inside the camper like you mentioned because it is not waterproof. The best location for the transmitter will be toward the rear of your trailer (closer to the camera). The system does include a 3M adhesive piece that you can use to mount and secure the transmitter. I have attached a short video review on this system that you can also check out.
    view full answer...
  • Backup and Observation Camera for 2016 Jeep Wrangler Unlimited Towing Enclosed Trailer
    There are a couple of good options for a back-up and observation camera for your 2016 Jeep Wrangler Unlimited pulling an enclosed trailer. If you are going to mostly be making short trips, the best option because it is the easiest to use is the Rampage Wireless Backup Camera for Smartphone or Tablet # RA7710. This camera uses a simple magnetic base so you can put the camera anywhere and view it on your smartphone. The only real drawback to this system is that it has a 4-hour battery life...
    view full answer...
  • How Does Rear View Safety Wireless Backup Camera System # RVS-091406 Install In Vehicle
    On the vehicle side the Rear View Safety Wireless Backup Camera System # RVS-091406 that you referenced does not require anything beyond just plugging the monitor into the cigarette light outlet. I attached the install instructions for this kit for more info for you to check out as well. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo...
    view full answer...
  • Camera Observation System Recommendation for 2010 Four Winds Chateau 23S
    Your 2010 Four Winds Chateau 23S would not be pre-wired for a backup camera but for a great option I recommend the Furrion kit part # FOS43TASF as this kit installs as easily as they can, comes with everything needed to install, and has the best reception of all of the camera kits for an RV like yours. I attached an install video for this for you to check out as well.
    view full answer...
  • Recommended Camera to Use for Observation System When Towing with a Ford Explorer
    The best camera system for your application is the Rear View Safety Wireless System # RVS-091406. The camera sends a wireless signal to the monitor which is powered by your 12V accessory outlet in your Ford Explorer. Wire the camera it to a reverse light circuit if you just want it as a backup camera. Otherwise if you want to use it as an observation system it would be better to wire it to your running light circuit. You can then turn the camera on and off by activating the headlights...
    view full answer...
  • Can Rear View Safety Wireless Backup Camera System # RVS-091406 be Wired to Reverse Light Circuit
    Yes you can wire the trigger wire of the Rear View Safety Wireless Backup Camera System # RVS-091406 to the reverse light which will activate it any time the vehicle is put in reverse just like a standard back up camera.
    view full answer...
  • Recommended Observation System for Enclosed Car Hauler to Monitor Traffic
    The Rear View Safety Wireless Hitch Camera # RVS-83112 is a good camera, but it is not the best system for monitoring the traffic behind you as it is intended for simply connecting to the trailer. My recommendation for an observation system like you are seeking is the Rear View Safety Wireless Backup Camera System - Cigarette Lighter Adapter # RVS-091406. The camera power will be wired to the running/clearance light circuit (so you will have constant power to the camera when connected)...
    view full answer...
  • Recommended Backup Camera for Towing a 23' Travel Trailer with a 2017 Ram 1500
    For your application I highly recommend the Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kit # RVS-770613-213 because Rear View Safety is one of the best systems out there and this kit comes with the quick disconnect so that you can easily hook up the trailer camera via hardwiring (which is a more secure connection). The camera that comes with this system has a 130-degree viewing angle and has 50' or infrared night vision. Simply connect the power of the camera...
    view full answer...
  • Backup and Observation Camera Compatible with Factory Pre-Wired Trailers
    Your 2019 Prime Time Tracer Breeze 25rbs like many others is pre-wired by the manufacturer specifically for the Furrion Observation Camera System. We have three options available with the 5 inch monitor and the 7 inch monitor being able to do split screen for additional cameras where the 4.3 inch does not have that split screen option due to the monitor size. Here are the options: Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF Furrion...
    view full answer...
  • Camera for Viewing Gooseneck Ball in 2018 Silverado 3500 with Tool Box and Transfer Tank
    The best way to determine if the Truck Bed Cargo Camera # 3460010 will give you visibility of your Silverado 3500's gooseneck ball is to attach a piece of string about an inch below the OEM 3rd brake light. This is where the camera lens will be once you have intalled part # 3460010. If the string can reach the bed floor just forward of the gooseneck ball without contacting either your transfer tank or tool box then you will have a line of sight to the ball. If not you might prefer a...
    view full answer...
  • Using Back Up Camera With Cargo Carrier on 2019 Hyundai Kona
    My assumption is that you'll want to retain the OEM camera and monitor. To rig up something like you describe would involve removing the factory camera and temporarily mounting it to the carrier you end up using. To do this would necessitate lots of cutting and splicing, and would make for a very difficult installation. Your easiest route and what I personally would do is to use an aftermarket camera system for when you're using the carrier. I'd recommend a wireless system like # RVS-091406...
    view full answer...
  • Recommended Wireless Rear Trailer Camera for 2019 Jayco 25RBS
    For your 2019 Jayco 25RBS, there are a few options. Your trailer is likely already prewired for the Furrion wireless system # FOS43TASF, # FOS05TASF, or # FOS07TASF. The differences are in screen size and viewing options when using multiple cameras. These are great systems and my recommendation for your trailer. If your trailer doesn't already have the shark fin and wiring # FRCBRKT-BL, then you can look at other options. If you want a similar option, I recommend the Rear View Safety...
    view full answer...
  • Recommended Rear View Camera System With Large Monitor
    Unfortunately, there isn't a larger monitor available for this particular camera system. For a larger monitor, Rearview Safety offers a wireless system, part # RVS-091406 with a 4.3 inch monitor that would work well. Instead of wiring the camera to the reverse light circuit, you'd wire it to the running lamp circuit. This circuit would be easiest to locate in the wiring harness that feeds the trailer connector. The running light circuit is usually a brown wire. If you didn't mind...
    view full answer...
  • Recommended Rear View Camera System For Back Of Trailer For Rear View While Driving
    The Swift Hitch Wi-Fi Camera for Smartphone or Tablet - Wireless - Night Vision - 5-Hour Battery # SH04 only has a 5 hour battery life. For a trip more than 5 hours, I recommend the Swift Hitch Wireless Hitch Alignment Camera and Monitor - Night Vision - 8-Hour Camera Battery # SH02DIGITAL. For a powered without battery option with wireless connectivity to your monitor, I recommend the Rear View Safety Wireless Backup Camera System - Cigarette Lighter Adapter # RVS-091406. This camera...
    view full answer...
  • Can the Rear View Safety Wireless Hitch Camera Be Used on an RV?
    Yes. The Rear View Safety Wireless Hitch Camera # RVS-83112 can be mounted on the back of your RV and used as a backup camera. This system has a 3.5" monitor, will work up to 70' away from the monitor and the camera has a 120 degree viewing radius. However, since it uses batteries (not included) you may want to consider a similar model that is powered by a 12v power source such as your cigarette lighter. I recommend looking at the Rear View Safety Wireless Backup Camera # RVS-091406...
    view full answer...
  • Alternatives for Trailer Hitches That Do Not Allow for the Use of a Weight Distribution System
    I do have ways to help with trailer sway and vehicle sag on your 2013 Volkswagen Tiguan but none of the trailer hitch receivers they have for your vehicle are compatible with a weight distribution system. Load leveling is what Volkswagen calls what we refer to as weight distribution. A weight distribution system is never going to be required however, if the gross trailer weight (GTW) of your trailer is more than 50% of the gross vehicle weight rating (GVWR) for your vehicle, the use...
    view full answer...
  • Can the Rear View Safety Wireless Hitch Camera part #RVS-83112 be Wired Directly to Power
    I have a great solution but the Rear View Safety Wireless Hitch Camera part # RVS-83112 is not designed to be hard wired. Instead use the Rear View Safety Wireless Backup Camera System part # RVS-091406 this is designed to do exactly what your are looking for. Check out the video below showing the connections.
    view full answer...
  • Will Other Camera Systems Work with the Pre-Installed Furrion Camera Mounting Bracket
    I do have an option for you but there is only one system that will work with the pre-installed camera mounting bracket on your trailer, the Furrion Digital Wireless Observation System. This system is offered with a 4.3" monitor part # FOS43TASF, 5" monitor part # FOS05TASF, and 7" monitor part # FOS07TASF. The 5" and 7" systems allow you to add up to three additional cameras, the Furrion Vision S Side Camera w/ Marker Light part # FCE48TASL for the sides of the trailer and the Furrion Vision...
    view full answer...
  • Is There a Replacement Camera for the Hopkins Smart Hitch or a Replacement System
    The Hopkins Smart Hitch Backup Camera and Hitch Aligner System part # HM50002 is an all in one unit. There is not a seperate back up camera only part that can be added. If you are going to replace the system the Rear View Safety Wireless Backup Camera System part # RVS-091406 is a better option for the replacement as it is designed by a company that specifically works with camera systems. The camera and view are of higher quality and one I definitely recommend.
    view full answer...
  • Recommended Budget Friendly Back up Camera for 12x5 Foot Enclosed Trailer
    Due to the fact that you're wanting to place the camera on the back of the trailer, a wireless option would be the best choice. The # 04928 Swift Hitch system you've looked at would indeed work well for you, but it depends on rechargeable batteries which can be inconvenient. For about the same cost, I'd recommend the # RVS-091406 from Rear View Safety. This system includes a wireless camera, a signal booster and a 4.3 inch monitor. The camera features 9 infrared lights for night-vision...
    view full answer...

Do you have a question about this Backup Camera?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality backup camera for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate backup camera information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Mary E
Updated by:
Sarah W
Written by:
Daron K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.