To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the front axle and to the frame to balance weight transfer and reduce body roll.
Features:
Specs:
The Roadmaster anti-sway bar does for side-to-side movement what a good pair of shocks does for up-and-down motion. You will notice a marked improvement in your vehicle's stability as the bar works to balance weight transfer and reduce body roll. The anti-sway bar acts as a link between your vehicle's frame and its front axle, using the axle as a brace to more effectively balance the shifting weight of your vehicle as you maneuver it. Lubricated bushings allow just enough pivot and rotation to compensate for the pressure placed on one side of your vehicle when it goes into sudden maneuvers, hits crosswinds or encounters shifting weights.
Superior Construction
The Roadmaster anti-sway bar is made of 4140 chromoly, a chromium and molybdenum steel alloy. This type of steel is considerably harder and stronger than the standard 1020 steel that is typically used in anti-sway applications. In addition, the larger diameter of the bar increases its torsional roll stiffness. The result is a bar that is not only stronger than the competition, but also nearly 30 percent better at resisting sway. The polyurethane bushings and grommets used at the attachment points are durable yet flexible, ensuring that the system is neither so rigid nor so malleable that it becomes ineffective.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at Roadmaster's line of front anti-sway bars for motor homes. You want to refer to our fit guide to find the appropriate sway bar for your vehicle.And this is what a typical sway bar's going to look like when it's installed. Yours might be slightly different depending on your chassis, but this'll give you an overall idea of how it'll look.Your sway bar will attach to your front suspension and your frame to help reduce sway when going down the road. You may experience sway when going over uneven terrain, hitting potholes, on windy days, or when passing by large traffic.Sway causes driver fatigue, because you're constantly having to fight to maintain straight line on the vehicle when it's swaying back and forth. This'll help reduce that sway, allowing you to have more energy when you get to your destination so you can do the things you enjoy doing.The polyurethane bushings will help dampen against vibration, and they're also resistant against road grimes, oils, and UV rays. The bar itself has a black powder coat finish to help resist against corrosion.This sway bar's made of 4140 chrome alloy steel, which is going to be significantly stronger than the typical 1020 steel that's used on your factory sway bars.Compared to most factory sway bars, it's going to have a larger diameter bar.
It's going to help increase torsional roll stiffness. This means there will be less twisting in the bar, making for a more stable, smooth ride for you. This will also make for safer travel. In the event of an evasive maneuver or a quick turn, the reduction in body roll that you'll get with this bar installed will help you maintain control of the vehicle, and can help reduce rollover.And now we'll take our anti-sway bar out on our test course. And when we go into our alternating bumps, you can instantly feel a difference in the amount of sway.
It's a lot more stable side-to-side than what it was before, making it much easier to maintain control of the steering wheel.And then we'll head into our straight bumps. And when we hit those, there's a definite difference in how much forward and aft movement we had before. It's definitely a more comfortable ride than what we had, and again it's easier to maintain control of the steering wheel.And now we'll head into our slalom, where we can really test out the sway capabilities. So if we had some evasive maneuvers, how our motor home would react. And it's a massive difference.
When turning, there's hardly any sway. I feel much more confident taking nice sharp, evasive turns.After owning this product for a year, our customer Wayne J. checked in and had to say, "It's an excellent product. Well made, great instructions. Easy install with proper tools.
Made an incredible improvement in the handling of our 35-foot motor coach with an F-53 chassis. Would definitely recommend to anyone wanting to greatly decrease sway in a coach."And that completes our look at Roadmaster's line of front anti-sway bars for motor homes.
Average Customer Rating: 4.8 out of 5 stars (1975 Customer Reviews)
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the front axle and to the frame to balance weight transfer and reduce body roll.
I have a 2017 Ford F350 Super Duty SRW, and we haul a heavy truck camper (Lance 1055.) I have Stable Load Uppers and HD airbags, but wanted to add a sway bar to add that extra layer of control, even though my truck has handled the camper well over the last 2 years and 10,000 miles. My truck did not come with an OEM sway bar installed, so I needed this kit that included the End Links too.
The Roadmaster Rear Sway Bar and End Links sold on etrailer are top quality products. They are robust and well made, with quality hardware to match. The product deserves a 5-star, and even unloaded, my truck handling improved right after installation, with improved cornering and no real impact on ride quality in my opinion. I have not yet loaded up our camper or towed our boat, but I have no doubt this sway bar will substantially reduce sway and will improve control and handling when the camper is loaded.
So why 4 stars and not 5?
1. I researched this product and the installation in detail. I planned on installing it myself and expected to find plenty of detail on etrailer's site, or Roadmaster's site, or the internet. My most pressing question was about where to mount the end links, and the orientation of the sway bar arms since I wouldn't be using the OEM end links. That information was no where to be found on the etrailer site, Roadmaster's site, or in any installation manuals. For a product and supplier that has likely sold lots of these to Ford Super Duty owners, I was surprised to find how little info was out there. The installation video on the etrailer site was helpful, but did not include any information for the end links, as they had a 2015 Super Duty and used the OEM end links already installed. I contacted etrailer and they told me to contact Roadmaster for more info on where to locate the end links with this kit.
2. I contacted Roadmaster. They told me they had no instructions and that despite my truck already having the cut-outs for the OEM bracket that attaches the OEM end links to the frame, that none of those holes may work for me. So they suggested I connect the sway bar brackets to the axle first and then see where the arms would line up with the end links. The tech also suggested that it wasn't critical that the end links were perpendicular
to the frame, but that I should try install the end links to allow the arm of the sway bar to hand as close to parallel as possible. No bueno. When I installed this the 14" end links (center hole to center hole) didn't allow for the arms to hang parallel to the frame. And I don't think it matters as the orientation of my sway bar and the arms looks about like every video or picture I could find on the internet of this year/model truck and this sway bar kit. It seems to function fine.
3. Installing it was a bear, especially the way they instructed me to. And I had to make some modifications to fit my truck, as the sway bar arms were rubbing up against my airbag mounting brackets. I got it installed, but the thin instructions turned what should have been a 60 minute job into 2 1/2 hours. A bit frustrating.
All in all, this will do the job intended and will provide me with peace of mind next time we load our camper. I am a bit frustrated that there were zero installation instructions specific to my year/make/model of truck given it did not have an OEM sway bar and the end links had to be installed with a bit of guesswork. You will also note in my pictures that I had to mount the end links to the sway bar arms differently on each side to make the bar fit around my air bag mounts.
This product arrived on time, and is as described in company literature. I have installed the sway bars and the sumo springs on my 2019 Ford E3 26 foot Thor motorhome. Installation is fairly straightforward. Having said that, I am a retired farmer and I am quite familiar with this type of work. Having the proper tools makes the job go much quicker and easier. Installation of the front sway bar took a little under an hour. The rear sway bar is a bit more complicated to install, but he can be easily accomplished by someone of average mechanical skills, equipped with the proper tools. I strongly recommend removing the rear wheels to facilitate installation of the springs and the sway bar. I have not driven my motorhome yet, but will be taking an extended trip in March. I am looking forward to an improved ride.
Fairly easy install. Drilling the hole in the frame was decent started with a 17/64 pilot hole then the 17/32 final hole. Take your time and let the drill do the work.
Do be aware of the hole placement on the drivers side as there are brake lines and wiring there.
All the contents were delivered in the package. The kit fit perfectly as designed. Ordered for a Ford F-350 Super Duty. Truck handles great!
Very straight forward remove and replace operation/installation. One person can do this laying on their back in a driveway. I'm very pleased with the drivability since the installation. The number one reason is - reduced driver fatigue!! And that's with 2 exclamation points!! Prior to this, I replaced the original shocks with a set from Koni, and upgraded Sumo Springs. To include, a steering stabilizer from Safe-T-Plus. One would think it would steer itself; at this point. All-in-all, I'm happy with this suspension upgrade.
Received the product in a timely manner. The shipping company used I’d give a no star rating. I received the anti-sway bar bare out of a box or wrapper with the installation part box and a cut out piece of cardboard with the shipping label on it taped to the bare bar with about five yards of packing tape. The bar was scuffed, scratched and chipped with the RoadMaster label destroyed. I realize it’s going to be installed under the front of my motorhome but as much as it costed I would like to be the one to scratch and scuff it. If I was a company installing this on a customers vehicle I’d return it. I do not believe it was shipped from etrailer in this condition.
We upgraded our front sway bar on our 2005 Jayco Granite Ridge on the Ford E450 chassis a year ago prior to starting a 17,000 mile trip around the country. It was a game changer for, improving handling and stability significantly (along with proper tire inflation). The installation video is very misleading regarding the ease of installation, showing only the attachment on the right side. The left side is much more difficult requiring wedging the stabilizer tab between the suspension and stabilizer plate. Just be ready for that, it is more involved than the right side.
With about 600 miles pulling the RV, we are mildly impressed with how well our three-quarter ton tracks down the highway while pulling the RV. Well worth the upgrade.
However, etrailer needs a video on adding the hangers. There are no instructions that come with the kit that cover the hangers. The hangers have different size bolts, the shorter ones fit inside the frame.
Was told from etrailer that this was going to be a quick plug and play but no this was to be installed on a class c ( no drilling) but no , ustraps had to be adjusted did not fit and struts would not reach had to drill chasis
Replaced the sway bar on my 1996 Fleetwood Flair. Easy bolt on installation. Have issues with the front-end swaying and bouncing around in cross wind and when approaching a slower moving truck. The new sway bar helped some but not as well as it was claimed.
Dit this job my self , no lift , on the floor on my back and got it installed. Front and rear anti sway bars and 4 new bilstein shocks and yes u need the 8 swivel head socket/wrench tool from harbor freight to do driver side. The rest of the instalation whent well, the onley consern is the front bracket sadle and bushing sits nearly on the bend of the sway bar ( see photo )
Great buying experience with ETrailer. Fast shipping and quality constructed part. Noticeable difference in controlling body sway. Very pleased with the bar and highly recommend Etrailer.
Solid-built sway bar. Helps stabilize in wind while driving. Using on 2016 Thor Vegas 25.3 RV, notorious for suspension and driving issues. Using front anti-sway bar as well with Safe-T-Plus steering stabilizer.
OH My! If you are thinking about getting one for your P32 wide body. Please don’t hesitate. It REALLY Works. Take the white knuckle effect out of driving. EASY installation! Easy Ordering from etrailer. Roger helped me get through the buying process and shipped to my house in 2 days! Thank You!!
This rear sway bar is very heavily built. Not easy to install by yourself, but doable. Honestly, I don’t feel allot of difference, however, I have already added inline air valves that reduce sway and the chassis has “V-Ride”, so I don’t know how much of a difference I would have felt without those items. As far as tractor trailer passing me, there’s a marginal improvement. Still, that being said, I’m happy with the purchase.
First, Eric was a great help throughout the purchasing and installation. I watched the tutorial numerous times and set up my tools. I bought a 3/4 inch torque wrench at Harbor Freight and a 4 ft galvanized pipe at Home Depot. I followed the instructions and the tutorial to the letter. The bar and mounting plates are heavy, so be very careful. This job isn't for a beginner, but if you are somewhat mechanically inclined, you can install it. The 300 Ft. Lbs torque of the 8 nuts took everything out of me. LOL...I adjusted the end links twice, and it leveled out great. Now, I will do a test run and see how it improves the handling of my motorhome. Its a 2022 Entegra Vision 29S.
I am happy to finally have the rear anti-sway bar installed. Noticed the difference right away. I will order the front anti-sway bar soon. I have the skills to install the anti-sway bar, but did not have the heavy tools to do the job. Paided a local shop 2hrs labour, well worth it.
I watched your video on the installation of the rear sway bar which I found to be helpful. I used an adjustable strap to level the sway bar before aligning and drilling for the links. Looking forward to a road test soon. Thank You
Very heavy duty sway bar. Using it on a 2016 Thor Vegas 25.3 RV. Much thicker than original and still holding up fine. Helps to stabilize in high winds and passing trucks. Also added the Safe-T-Plus stabilizer to keep wheels from wandering.
This sway bar is the real deal. Easy to follow instructions but I had it installed because I'm lazy. It took one hour labor
The bar fit nicely. The brake proportioning valve bracket had to be modified and the hole elongated. The performance with the camper on is night and day difference on my 1998 2500 Ram.
Worth every penny in handling and stability performance gained on Entegra Odyssey 24B (was not standard on 2021 model) Performance was gained along with Roadmaster Front Anti-sway bar and, not rear alone. Also added Roadmaster steering stabilizer at same time.
Your installation video was helpful. The front bolts on the the hangers required heating to break them loose. The factory was generous with blue lock tite. I might add the front bolts require a 18mm socket. Looking forward for a road test. Thank You always
Purchased for 2021 F350 that I haul a large in bed camper. I also haul water as I live out of the city. All the parts for this kit are heavy duty, and not hard to install with hand tools. I have not had the camper back on the truck yet but have hauled water. The sway bar does an awesome job keeping the truck flat and no sway. I am very happy with the quality and excellent job this sway bar does. Highly recommend.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/1/2023
One is a lonely number when it comes to ratings. How can I help? Please let me know.