To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Minimize sway and driver fatigue by improving the stability and driveability of your motorhome. Solid, 1-3/8" chromoly bar mounts to the front axle and to the frame to balance weight transfer and reduce body roll. Includes mounting hardware.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a brief look together at this Hellwig front anti-sway bar. Now this anti-sway bar is designed to fit your 2021 to 2023 Ford F-150, and on custom fit parts such as this sway bar, I do recommend taking advantage of our vehicle fit guide. Simply input the year, make, and model of your vehicle and our fit guide will confirm that this will work for you, or if we have something comparable that will work for you. Now, this bar is designed to replace your factory installed front sway bar and this is going to reuse your factory supplied end links. And when you have this installed, this is going to help minimize side-to-side movement, improving the overall stability of your F-150.
This system is going to let you execute turns and quick maneuvers with confidence. It's going to provide a level ride for you even on irregular surfaces. This is also going to help reduce driver fatigue by minimizing the effort required to keep your F-150 in line. And this is also going to help diminish the effects of shifting cargo, passing motorists and crosswinds. Now, this anti-sway bar does for side-to-side movement what a good pair of shocks does for up and down motion, giving you a marked improvement in the stability of your F-150.
Now, the bushings are made of a polyurethane instead of the standard rubber variety, giving you a longer lasting system. They're durable, they're resistant to damage caused by oil and gasoline. So as you know, less wear means less give in the system and better overall support. Now, the diameter of this bar is 1 and 3/8 inches. It is made here in the USA of a solid heat treated chromoly steel giving you that superior strength.
And I would like to zoom in close up just a little bit just to show you this finish. This bar features a silver vein hammer tone finish, which not only gives you protection from corrosion, but the finish actually has little divots in it. So when you grease your polyurethane bushings and slide them on the bar, this finish is gonna do a great job of holding the grease in the bushing to prevent them from squeaking. This does include a set of instructions to guide you through the installation process, along with some additional hardware and bushing lubricant. The brackets that hold your polyurethane bushings are coated in a black powder coat finish to resist rust and corrosion, and this does have a limited lifetime warranty from Hellwig.
Well, I think that's gonna wrap up our brief look today. I do hope that our time together was helpful for you. Again, my name is Andy, thank you for joining me.
Average Customer Rating: 4.8 out of 5 stars (58 Customer Reviews)
Minimize sway and driver fatigue by improving the stability and driveability of your motorhome. Solid, 1-3/8" chromoly bar mounts to the front axle and to the frame to balance weight transfer and reduce body roll. Includes mounting hardware.Rear Sway bar by Helwig: Great, HOWEVER the flange is too rounded on the brackets provided and you cannot get a washer to fit when tightening-also cannot get a socket on to tighten, thus you cannot get a torque wrench on. Front Sway bar by Roadmaster: Great. BUT the provided new bushing that fits in the factory bracket is too thick and needs to be trimmed to fit right. BOTH of these issues SHOULD NOT have to be tolerated by a buyer of what is supposed to be an expensive quality product!!! The staff is superb but they asked me for a PRODUCT review and both brands are not impressive on the hardware.
Makes a noticeable improvement on handling on lean on off and on ramps, cornering, etc. when combined with the rear hellwig sway bar. Should be standard equipment on C class motor homes on the E450 chassis.
Good quality product the install went smoothly. Improved handling greatly. Very pleased with product as well as E Trailer both are awesome. Shipping was fast.
Sway bars are considerably larger than factory. They were easy to install and helped to control side to side sway. These bars were installed along with a rear sway bar. I would recommend these sway bars
Almost twice the size of my original. It was an easy perfect fit. Used the stock mounting locations as original.
Really takes that rock-n-roll motion to a minimum, especially when driving out a driveway. Much beefier than the stock E450 sway bar - very pleased with this product.
Really takes that rock-n-roll motion to a minimum, especially when driving out a driveway. Much beefier than the stock E450 sway bar - very pleased with this product.
Have hellwig swaybar on rear from the factory. Adding the front made Jayco 29 drive like my pickup. Great product, easy to install except for removing factory bolts! Not the product just an observation
Installed this sway bar along with a front sway bar. This bar is quite larger than the factory one and helped control side to side sway. I would recommend this sway bar cause it make driving our RV so much more enjoyable.
Fast shipper, quality products and installation videos too
Easy installation and noticably better handling. Hope it will help when I have the drop in camper in the bed. (Already had rear Hellwig bar)
Thank You etrailer for your prompt shipping and Expert advice and videos!!
Knowledgeable sales staff , quick to process and ship order , no shipping fee and arrived as expected .
Excellent website and easy ordering! The parts were delivered in just a couple of days; really fast process! Thanks for everything and if I need anything else, Etrailer will be the first place I look:)
We’re in total awe that delivery occurred today. An installer has it and it will go on our truck tomorrow.
Sway Bar is working Excellent! Thank you , David !
helps a lot on entering and exiting driveways with steep gutters.
Great experience. The orginal sway bar was disconntinued however Tiffani stayed on top of my order at all times with a direct replacement for my truck.
Thank you,
Good product no torque values on bolts in direction!
Massive improvement over the stock sway bars!
Massive improvement over the stock sway bars!
The only complaint I have is the shipping was via USPS which I did not expect. I assumed with a large car part, this would be shipped via FedEx or UPS. Thankfully I did receive it though and it worked very well.
Great communication!!
As usual, etrailer was so helpful and knew exactly what part we needed for our rig. They were sent out the day they were ordered and we had them installed and are 100% pleased with the product. Our motorhome definitely feels more stable and tight with these stabilizers on them.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.