Airaid MXP Cold Air Intake System with SynthaMax Dry Filter - Stage 1 - Closed

2010 Ford F-250 and F-350 Super Duty - Airaid MXP Cold Air Intake System with SynthaMax Dry Filter - Stage 1 - Closed

Rotomolded air box completely isolates dry performance air filter from engine heat, lowering air temps to improve horsepower and torque for your Ford F-250 and F-350 Super Duty. Quieter than open systems.

Features:

• Stage 1, closed cold air intake (CAI) improves airflow into your engine, boosting horsepower and torque
  • Closed system creates less noise than an open system
• Air box blocks out heat from the engine to maximize cold air draw
  • Seals to hood with built-in rubber gasket to create a closed air box
  • Rotomolded, cross-linked, high-density polyethylene construction resists heat better than steel or aluminum components
• Easy-to-clean, dry air filter provides excellent engine protection while still allowing for improved airflow
  • 2 Layers of 100-percent synthetic material sandwiched between stainless steel mesh
  • 99.6-Percent filtration efficiency rate
  • Washable and reusable for easy maintenance - no need to oil
  • Durable urethane frame
• Easy installation
  • Uses factory mounting points
  • Includes stainless steel clamps with silicone and urethane couplers
• Custom fit for your vehicle
• Made in the USA

Specs:

• Horsepower gain: up to 9 hp
• Torque gain: up to 36 ft-lb
• Lifetime warranty

Cold air is denser than hot air, and denser air provides more oxygen for more complete fuel combustion. More oxygen = more combustion = more power and better efficiency for your engine. The Airaid MXP intake system applies this simple formula to ramp up your engine's horsepower and torque for awesome performance gains.

MXP Cold Air Intake System

The MXP intake is Airaid's top-of-the-line system. The air box serves as an aggressive, serious upgrade over your stock intake. The rotomolded, cross-linked, high-density polyethylene construction is durable and helps keep air cooler because it is more heat resistant than aluminum or steel. The box is also designed to better route incoming air than your factory air box to more efficiently direct air through the filter.

The upper edge of the air box is lined with a rubber gasket. The air box surrounds the air filter, and the gasket creates a seal with the hood of your vehicle. This isolates the air filter from engine heat on all sides, thus helping to ensure that the air that is pulled into the engine is cold and dense.

SynthaMax Dry Air Filter

This Airaid intake kit includes a SynthaMax air filter that offers improved airflow and has a 99.6-percent filtration rate for superior protection. The large, 360-degree conical filter is composed of 2 layers of synthetic material that filter out contaminants while allowing clean air through. The synthetic material is sandwiched between 2 layers of stainless steel mesh that provide rigid durability.

This Airaid SynthaMax filter is washable and reusable. The dry filter does not need to be oiled, which makes for easy maintenance. It is recommended that you clean your SynthaMax filter every 30,000 to 50,000 miles with the Airaid cleaning kit (sold separately).

Gains in Horsepower and Torque

When tested on a dynamometer, this intake system demonstrated maximum increases of 9 hp and 36 ft-lb of torque. The dyno test is an accurate way to test an air intake's ability to affect an engine's power curve, but factors such as engine condition and fuel type can cause results to vary.

401-214-1 Air Aid MXP Cold Air Intake Kit with Syntha Max Dry High Flow Air Filter

Installation Details