1. Air Intakes
  2. Airaid
  3. Sealed Box
  4. Dry Filter
  5. Tube Included
  6. Intake System
Airaid MXP Cold Air Intake System with SynthaMax Dry Filter - Stage 2 - Closed

Airaid MXP Cold Air Intake System with SynthaMax Dry Filter - Stage 2 - Closed

Item # AR301-277
lowest price pledge
Retail:$514.79
Our Price: $360.95
You Save: $153.84
Air Intakes

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 13 lbs
Quantity: 
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Rotomolded air box completely isolates dry performance air filter from engine heat, lowering air temps to improve horsepower and torque for your vehicle. Quieter than open systems. Polyethylene intake tube. Call 800-298-8924 to order Airaid air intakes part number AR301-277 or order online at etrailer.com. Free expert support on all Airaid products. Guaranteed Lowest Price and Fastest Shipping for Airaid MXP Cold Air Intake System with SynthaMax Dry Filter - Stage 2 - Closed. Air Intakes reviews from real customers.
  • All Info
  • Reviews (6)
  • Q & A (1)
  • Videos (1)
  • Photos
  • Why etrailer?

Airaid Air Intakes - AR301-277

  • Airaid
  • Sealed Box
  • Dry Filter
  • Tube Included
  • Intake System
  • SynthaMax Filter

Rotomolded air box completely isolates dry performance air filter from engine heat, lowering air temps to improve horsepower and torque for your vehicle. Quieter than open systems. Polyethylene intake tube.


Features:

  • Stage 2, closed cold air intake (CAI) improves airflow into your engine, boosting horsepower and torque
    • Closed system creates less noise than an open system
  • Air box blocks out heat from the engine to maximize cold air draw
    • Seals to hood with built-in rubber gasket to create a closed air box
  • Intake tube increases air volume and velocity
    • No pleats or breaks in the tube means decreased turbulence
  • Rotomolded, cross-linked, high-density polyethylene box and tube resist heat better than steel or aluminum components
  • Easy-to-clean, dry air filter provides excellent engine protection while still allowing for improved airflow
    • 2 Layers of 100-percent synthetic material sandwiched between stainless steel mesh
    • 99.6-Percent filtration efficiency rate
    • Washable and reusable for easy maintenance - no need to oil
    • Durable urethane frame
  • Sensor pad(s) on intake tube provide relocation points for factory sensors (where applicable)
  • Easy installation
    • Uses factory mounting points
    • Includes stainless steel clamps with silicone and urethane couplers
  • Custom fit for your vehicle
  • Made in the USA
  • Lifetime warranty


Note: Not legal for sale or use in the state of California.


Cold air is denser than hot air, and denser air provides more oxygen for more complete fuel combustion. More oxygen = more combustion = more power and better efficiency for your engine. The Airaid MXP intake system applies this simple formula to ramp up your engine's horsepower and torque for awesome performance gains.


MXP Cold Air Intake System

Airaid Intake Installed

The MXP intake is Airaid's top-of-the-line system. The air box and the intake tube serve as aggressive, serious upgrades over your stock intake. The rotomolded, cross-linked, high-density polyethylene construction of each component is durable and helps keep air cooler because it is more heat resistant than aluminum or steel. The box is also designed to better route incoming air than your factory air box to more efficiently direct air through the filter.


The upper edge of the air box is lined with a rubber gasket. The air box surrounds the air filter, and the gasket creates a seal with the hood of your vehicle. This isolates the air filter from engine heat on all sides, thus helping to ensure that the air that is pulled into the engine is cold and dense.


The intake tube also generates more airflow to the engine. The tube's smooth, wide-open design delivers high-volume, high-velocity air into the throttle body. Not only does the tube allow air to flow along an unrestricted path, but it is also free of noise baffles that would hinder airflow.


SynthaMax Dry Air Filter

Airaid SynthaMax Air Filter Layers

This Airaid intake kit includes a SynthaMax air filter that offers improved airflow and has a 99.6-percent filtration rate for superior protection. The large, 360-degree conical filter is composed of 2 layers of synthetic material that filter out contaminants while allowing clean air through. The synthetic material is sandwiched between 2 layers of stainless steel mesh that provide rigid durability.


This Airaid SynthaMax filter is washable and reusable. The dry filter does not need to be oiled, which makes for easy maintenance. It is recommended that you clean your SynthaMax filter every 30,000 to 50,000 miles with the Airaid cleaning kit (sold separately).



301-277 Air Aid MXP Cold Air Intake Kit with Syntha Max Dry High Flow Air Filter



AR301-277 Installation InstructionsInstallation Details AR301-277 Installation instructions

This Product Fits The Following Vehicles

2013 - 2014 Dodge Ram Pickup 1500 - 5.7L V8 Engine - HEMI

2013 - 2014 Dodge Ram Pickup 2500 - 5.7L V8 Engine - HEMI

2013 - 2014 Dodge Ram Pickup 3500 - 5.7L V8 Engine - HEMI

2013 - 2018 Ram 1500 5.7L V8 Engine - HEMI

2019 - 2019 Ram 1500 Classic 5.7L V8 Engine - HEMI

2013 - 2019 Ram 2500 5.7L V8 Engine - HEMI

2013 - 2019 Ram 3500 5.7L V8 Engine - HEMI



California residents: click here


Video of Airaid MXP Cold Air Intake System with SynthaMax Dry Filter - Stage 2 - Closed

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Airaid Air Intakes - Intake System - AR301-277 Review

Today were going to review part number AR301-277, this is the Airaid MXP Intake System with the SynthaMax Dry Filter, this is a stage two version. This part number is designed to fit the 2013 Dodge Ram 1500, 2500 and 3500, that has the 5.7 liter V-8 engine. This cold air intake system will increase your engine horsepower and engine torque by collecting cold air and improving the air flow. See here, this will replace your factory airbox. Some of the parts will connect to this airbox. Has a stage two sealed box cold air intake with air dam which will block hot air and has large inlets to maximize the cold air draw.

Also has the intake tube here, which has the velocity stack and also very large inlets to promote the air flow. Both of these parts, the box and the intake tube are a roto-molded cross-linked, high density Polyethylene, this will replace the stack system on your vehicle.This will also increase to your air flow and draw in more air than a fully close system. The cold air dam will isolate engine heat, will maximizing air intake. Using the seal on top here, it will actually seal directly to the hood of your vehicle and block out any hot air. It does cause less noise than an open system and being made of a Polyethylene it is will resist engine heat better than your steel and aluminum airboxes.

There are spots on the intake tube right here, you can see a hole here and theres a hole here where you can actually gives you a relocation point for some of your factory centers on your vehicle, that will still give you some of your factory readings that would be use to.This is a very easy installation. It does use factory mounting points on your vehicle. Has the stainless four stainless steel clamps that will help connect all these parts together. It does have urethane couplers, which will help connect your air intake tube to your airbox. This part is made in the USA.

It is custom-made to fit your vehicle. It also does come with the Synthax flow air filter or a SynthaMax, Im sorry, SynthaMax air filter. This is a dry two layer air filter, which are deliver more than 99% filtration efficiency rate. Has superior air flow, excellent filtration and very easy maintenance. Lets take it out here to show you.

This large 360 conical filter is composed of two layers of a 100% synthetic material between two layers of stainless steel mesh.You can see that would drop right into your airbox. This does provide excellent protection and superior air flow. It is washable and reusable for easy maintenance. It has a very durable urethane frame. This intake system will maintain proper air and fuel ratios. Therefore, eliminating the need for re-calibration once the installation is complete. That should do it for the review on part number AR301-277, the Airaid MXP Intake System with the SynthaMax Dry Filter.


Customer Reviews

Airaid MXP Cold Air Intake System with SynthaMax Dry Filter - Stage 2 - Closed - AR301-277

Average Customer Rating:  4.8 out of 5 stars   (6 Customer Reviews)

Rotomolded air box completely isolates dry performance air filter from engine heat, lowering air temps to improve horsepower and torque for your vehicle. Quieter than open systems. Polyethylene intake tube.

- AR201-285
by:

Review from a similar Airaid MXP in Air Intakes


Pick this air raid intake package for my GMC. So far so good. Like the sound of the engine the step up horsepower and torque. 634600



- AR511-302
by:

Review from a similar Airaid MXP in Air Intakes


My 4Runner is a big vehicle and it takes a bit to get going, so anything that adds a bit of power and torque is welcomed. When I installed this intake it did seem to add just a bit more get up and go to my acceleration. The thing I liked best about the intake is that when accelerating it sounds better, a bit deeper sound than before. When idling or normal driving there was not a noticeable difference in sound. My gas mileage after 1,000 miles of use was just a bit improved. There was not enough improvement that I would conclusively say it improves mileage but it probably will not hurt your MPG. 102573



- AR200-280
by:

Review from a similar Airaid MXP in Air Intakes


Glad I went to etrailer! Intake works great and got it at a great price. 705028



- AR202-267
by:

Review from a similar Airaid MXP in Air Intakes


Looking good after a year, Escalade sounds better, really couldn’t tell a difference in power or mileage , but hey........sounds great 671660



- AR303-254
by:

Review from a similar Airaid MXP in Air Intakes


Noticeable power increase and 1-3 MPG i ncrease. 584961



- AR883-282
by:

Review from a similar Airaid MXP in Air Intakes


works good ,can feel power differance. 529495


10
10

Ask the Experts about this Airaid Air Intakes




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality air intakes for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate air intake information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
David L
Updated by:
Brian B
Updated by:
Alex H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.