See what our Experts say about this Gen-Y Hitch Accessories and Parts

• Will the Gen-Y Adjustable Ball Mount Work With a 2022 Acura MDX
  Yeah you absolutely can, Michael. The shank # 325-GH-0352 will fit into any 2" receiver so assuming your Acura's OEM receiver is the same size you could use it.
  view full answer...
• Dimensions of Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts
  The overall length of the # 325-GH-0352 is 7.563". The distance from the hitch pin hole to the adjustment holes is 4.5" and all the way to the end past the holes is 5.5". I have attached the dimensional drawing below for your reference.
  view full answer...
  
• Solution to Use Gen-Y Torsion Weight Distribution Shank with Equalizer WD System on 2017 Ford F-250
  Yes. The Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2" Receivers # 325-GH-0352 has 1-1/4" spaced holes on the shank the same as a standard weight distribution hitch, so it will be compatible with the Equal-i-zer # EQ37141ET weight distribution system. You'll also be able to use the # 325-GH-0352 with the Gen-Y Torsion 2-Ball Mount with a Gen-Y Stacked Receiver. I'll add that there is a system that has already been created as an all-in-one of the combination you're...
  view full answer...
• Does Gen-Y Have a Weight Distribution Shank Available?
  I have a couple great solutions but placing a weight distribution system in a Replacement Shank for Gen-Y Adjustable Ball Mount part # 325-GH-304 is not the way to go. Instead you can in most cases attach your current weight distribution system to one of the following and eliminate the additional connection point and problems that arise from it. The first is a fixed Weight Distribution Shank for Gen-Y Hitch part # 325-GH-0352 the second is one of my favorites the Gen-Y Shock Absorbing...
  view full answer...
• Can Weight Distribution Shank for Gen-Y Hitch Ball Mounts Be Used with Standard WD Systems
  The Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts # 325-GH-0352 that you referenced is designed to fit the standard weight distribution heads found on nearly all weight distribution systems. Most of the time if there's an issue with a system that uses washers like yours it's because the front of the shank has a cut out section unlike this kit. So this SHOULD fit what you have but to be sure let me know what brand and model you have and I can give you a more concrete answer.
  view full answer...
• How Heavy is Gen-Y Torsion 2-Ball Mount?
  The product weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1225 is 87 lbs. This hitch mount is awesome due to all the extra things you can use with it. It has 5 stacked 2" hitch receivers that can accommodate almost any hitch accessory. When you do use this though, I recommend picking up extra goodies like extra hitch pin locks # 34061650-D and anti-rattle clamps #GY88XR. Depending on what you're using this for, we also have extra tools like a weight distribution...
  view full answer...