Replacement Clamp Bracket for etrailer Aluminum Motorcycle Carrier - Qty 1

Video Transcript for All About the Replacement Clamp Bracket for etrailer Aluminum Motorcycle Carrier

Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this etrailer replacement clamp bracket. This is going to replace the clamp bracket needed for your etrailer maxxtow or maxxhaul aluminum motorcycle carrier. And so if you are needing to replace that original camp bracket, this is gonna be exactly what you need. This is a three 16th inch thick, two and we'll call it two and seven eighths in inch wide by two and a quarter inch tall.

We've got that shelf there that is approximately one inch deep. And we've got these two holes there that are about three eighths of an inch in diameter, they're spaced center to center approximately one in five eighths of an inch apart. We've got this nut here in the middle. That is a 12 millimeter by 1.75 standard thread nut that is going to be welded directly in the center. So if you are needing to replace that original clamp bracket this is going to be the replacement for you.

It's got a nice gray paint finish so it should hold up well, to exactly what you needed to do, to do for your motorcycle carrier. That completes our look for tonight. Again, I'm Michael with etrailer.com Thanks for watching..