12-Volt Motor Kit for Ram Landing Gear

12-Volt Motor Kit for Ram Landing Gear

Item # M1230

lowest price pledge

Retail:$92.53

Our Price: $61.20

You Save: 34%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 5 lbs

Quantity: 
In Stock, Ships Today
etrailer Electric Motor Accessories and Parts - M1230
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Trailer Jack
  • Camper Jack
  • Electric Motor
  • etrailer
12-Volt electric gear motor lets you operate your etrailer or Ram fifth-wheel landing gear (RVLG-8000), eliminating the need for hand cranking. Easily connects to your trailer's battery. Call 800-298-8924 to order etrailer accessories and parts part number M1230 or order online at etrailer.com. Free expert support on all etrailer products. Guaranteed Lowest Price and Fastest Shipping for 12-Volt Motor Kit for Ram Landing Gear. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (42)
  • Q & A (80)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer Accessories and Parts - M1230

12-Volt electric gear motor lets you operate your etrailer or Ram fifth-wheel landing gear (RVLG-8000), eliminating the need for hand cranking. Easily connects to your trailer's battery.


Features:

  • 12-Volt electric gear motor powers your etrailer or Ram landing gear (RVLG-8000)
    • Converts manual landing gear to electric power
    • Replaces an old or worn-out motor
  • Simple installation onto gearbox
  • Fits landing gear with 1/2" diameter drive shaft


Specs:

  • Power consumption: 30 amps
  • Distance between mounting holes center to center: 4"
  • RPM: 5150


Dimensions of mounting holes


M1230 12-Volt Motor Kit for Ram Landing Gear







Video of 12-Volt Motor Kit for Ram Landing Gear


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Trailer Jack M1230 Review

Today, we're going to be taking a look at the 12 volt DC motor for landing gear. This 12 volt electric gear motor is going to power your etrailer or Ram landing gear. Part number RVLG-8000. That landing gear is sold separately. This is going to covert your manual landing gear to electric power, and it can be used to replace an old or worn out motor. Pretty simple installation. It's going to feature this connection point right here and the two mounting locations.

These are going to be the connections points that mounts this to the gear box. Your gear box is not included, but it's going to look something like this. That pin would line up right there with the receiver portion on the motor and then the gear box is going to have these indentions that are going to line up with the mounting points right here on the motor. Inside the gear box are going to be threaded connectors that are going to receive the ends of the included hardware. You'd place that through and once you get it snug, you go ahead and tighten up the bolts that's included with the motor and that will thread into the gear box and that's going to bring these two pieces together which is going to make it feel like one solid piece.

Again, the gear box is not included, so that does need to be provided separately. The power consumption is going to be around 30 amps for this motor. Again, mounting hardware is included. That's going to have two bolts. It's also going to have your black and red wires, so this is going to connect to the landing gear control switch. The control switch would connect to the battery.

The control switch is going to be the unit that retracts or extends the landing gear. When it comes to the measurements of the motor, it's going to give us an overall length measurement from end to end of about 8 1/2 inches long. Measuring this direction, we're looking at about 3 3/8 of an inch. Going this direction, edge to edge, we're looking at a measurement of about 4 inches. These mount holes are going to be separated on center apart from one another by 4 1/8 of an inch. That's going to do it for today's look on the 12 volt DC motor for landing gear..


Customer Reviews

12-Volt Motor Kit for Ram Landing Gear - M1230

Average Customer Rating:  4.8 out of 5 stars   (42 Customer Reviews)

12-Volt electric gear motor lets you operate your etrailer or Ram fifth-wheel landing gear (RVLG-8000), eliminating the need for hand cranking. Easily connects to your trailer's battery.

- M1230
by:

Perfect fit at a perfect price ! Thanks for your help. 493237


Comments

Very satisfied with the product ! It has performed flawlessly.

Dan - 04/08/2019

52633

- M1230
by:

Great product, shipping was quick and an easy transaction! Thanks! 411369



- M1230
by:

The motor got to us quickly. It was easy for my husband to install and has not given us any problems. Thank you! 509417



- M1230
by:

Has worked with no problems. Two suggestions, add as an optional buy to legs I bought several weeks before, and a second(faster) gear. However extra gear may add an additional expense. 568740



- M1230
by:

Perfect replacement fit and works just as it is supposed to. The motor and gearbox purchase were at a better price than just the motor at most sites. If the old and new motors were side by side without decals on them you could not tell them apart. 541484



- M1230
by:

When I ordered this it was on backorder, once I did get it bolted right in place had to cut the wires on the harness because the plugs were different than my unit .I wired it to my harness and it works perfect what can I say,great product great price . THANKS 445536



- M1230
by:

This product is exactly what I have been looking for and at reasonable price. The only thing I would say, is to put the cost and description on the parts contained in a shipment. We live in a border city Sault Ste. Marie Ontario Canada and pick up our shipments in Sault Saint Marie Michigan USA. When we cross the border into Canada there is no proof of how much the items cost so the guard just needs to take our word for what the cost is. 463023


Comments

The products that I purchased are fantastic and are doing the job that I wanted them to do. When I went to the local RV dealer he said “You Can’t Do That On Your RV “. I said “ Just Watch Me”. I put the parts on my RV and they work great. Thanks

Richard J - 12/27/2018

48000

- M1230
by:

Exactly what I wanted at the right price . 658575



- M1230
by:

Received the item in 3 days and took 5 minutes to install. Works very well 654811



- M1230
by:

This is a great unit and was very easy to install. No drilling just fasten with the two enclosed bolts wire it up and you are good to go. A very economical way to have electric jacks on your trailer or fifth wheel camper. I do not have pictures right now but very easy to install. Saves a lot of hand cranking. Thanks for a great product. 645312



- M1230
by:

This made a great direct replacement for my Forest River 5th wheel. It's just as good if not better than the lippart oem one and at a much better price point. With such high value I'm tempted to get another one and a second drive leg and switch to have dual drive/leveling capabilities. 634398



- M1230
by:

installed in about 5 mins and seems to work great, very nice people to do business with 634372



- M1230
by:

Motor was correct replacement for my existing one. Easy to install and worked well. Also will allows me to hand crank my landing gear if necessary. Fast shipping and good product 619536



- M1230
by:

Got exactly what I ordered and needed in a very timely manner. Great service! 613333



- M1230
by:

Worked great was the same as the old one 608862



- M1230
by:

This was a great replacement and bolted right up. 600234



- M1230
by:

Works good so far , easy installation 591304



- M1230
by:

Received this motor. fit perfectly. already installed took only a few minutes. good product 589289



- M1230
by:

I bought this motor to replace the weak one on my Newmar Kountry Aire fifth wheel with the Bulldog landing gear rated at 8000 pounds. I replacement motor that I installed last year was rated at 6400 pounds and really struggled to lift the front of this heavy trailer. Taking a chance I ordered the etrailer M1230 motor which is rated at 8000 pounds, hoping it would fit the Bulldog gear. It fits perfectly and has the power to lift the trailer without struggling. It was a five minute install. Highly recommend this motor as a replacement for any landing gear and and the folks at etrailer who were great at answering all my questions. 583053



- M1230
by:

Very happy with product and customer service. Delivered as promised. 545486



- M1230
by:

The motor was all but identical to the one we removed. 544498



- M1230
by:

Received today and took about ten minutes to install. I used it to convert manual gear to electric. Never could find the name on my gear but the video showing the measurements convinced me it would fit. Only problem was bolts were a little to long for my gearbox but a couple nuts used for shims cured that. Worked great and very reasonable price for such a nice option. Thanks for a great deal. 541782



- M1230
by:

Installed in minutes and fixed my probl em 524084



- M1230
by:

This motor works ok but it sounds as if it is struggling to lift the trailer. 523768



- M1230
by:

Powerful little motor and simple to ins tall 519242



- M1230
by:

Great little motor just need the switch 516271



- M1230
by:

Delivery as promised. 508445



- M1230
by:

great product fast shipping friendly customer service 503878



- M1230
by:

Motor installed in 10 minutes and is very nice.. 503062



- M1230
by:

Works good 501270



- M1230
by:

Had to wait a couple weeks extra but when I got it work's great. 500357



- M1230
by:

Great products with great prices had issue with damage in shipping my item was replaced quickly at no extra cost or hassle will recommend this seller to anyone and everyone thanks for the good quick service 471817



- M1230
by:

Main issue is how the gear reducer attaches to the power leg. Doesn't like how it doesn't screw in just sits on it. Everything else is good that's my only issue. 412784



- M1230
by:

Better than expected quality with prompt delivery 397318



- M1230
by:

Turns a manual fifth wheel jack into an electric one very inexpensively-and easily installed 395632



- M1230
by:

has plenty of power 375815



- M1230
by:

Strong motor made big difference in raising and lowering landing gear 364380



- M1230
by:

Good product, it's bolted right in to replace the old one Thank you 360860



- M1230
by:

Received the motor sooner than expected. The bolts was not enclosed, I called customer service and the bolts were to me in a few days. Very easy to hook up to our Challenger RV. Works perfect. Thanks 349632



- M1230
by:

Like I said on the landing gear, no more cranking. It works great. 318750



- M1230
by:

I bought this motor for my landing gear which was a manual landing gear. I hooked it up in about 5 min. I also had to buy a wire harness go along with it everything works great 288001



- M1230
by:

Before my purchase, I called and was provided great help and information. The shipping was very fast. I would like to THANK e trailer for a Fantastic buying experience! 277215


42
42

Ask the Experts about this etrailer Accessories and Parts


  • Can etrailer Landing Gear Replace Landing Gear On 2007 Montana Fifth Wheel Trailer
  • The etrailer Landing Gear Set, part # RVLG-8000 can be used to replace the landing gear set you have on your 2007 Montana. The hand crank is available as a separate item and is part # RVLG-HDL. Most landing gears are interchangeable but you can take a quick measurement to make sure this works for you. The weld stops measure 15-1/2 inches inside to inside and 17-1/2 inches outside to outside. For a landing gear with a manual crank included you can order part # RVLG-8HDL. You can...
    view full answer...

  • Replacement Motor Recommendation for Atwood Landing Gear Motor MPD71119
  • It sounds like you are needing a replacement motor for your Atwood Landing Gear System. To replace the MPD71119 motor that you referenced, I recommend the Lippert High Speed Landing Gear Motor # LC141893. This is a high-speed motor that will let you quickly extend and retract the landing gear and it features a 5,000 pound capacity. This will replace your current motor by simply swapping the parts. The RAM jack motor part # M1230 that you referenced is not the correct motor.
    view full answer...

  • How to Determine Correct Landing Gear for a 2010 Keystone Cougar Fifth Wheel
  • To determine if the Landing Gear # RVLG-8000 will fit your 20110 Keystone Cougar you first need to determine the distance between the weld stops on your current gear. If your weld stops (see attached picture) measure 15-1/2" on the inside and 17-1/2" on the outside then the 8K landing gear will do a great job and fit your Keystone Cougar. Let me know if your weld stops are in different locations and I can help you out. Although a lot of motors can be used in place of another one I...
    view full answer...

  • Are Replacement Parts for Atwood Landing Gear Available or Will Another Brand Fit
  • The division at Atwood that handled the jacks and landing gear was sold off to Lippert so direct replacement parts are not available. But it is likely that the gear box and motor of another brand will still fit. And yes, the gear box and motor do just sort of hang there. Gear box # RVLG-RDBOX is one possible option. With it you can use motor # M1230. For the driver leg D shaft there were 3 possibilities for Atwood landing gear depending on which model it is (standard duty, heavy duty,...
    view full answer...

  • Replacing ADTH 1RV-200 Landing Gear Motor
  • From what I could find it looks like your ADTH 1RV-200 motor has a weight capacity of 6,500 lbs. You can use a motor that is rated for a higher capacity, like our replacement motor # M1230 for Ram landing gear which is rated at 8,000 lbs. Just keep in mind that just because the motor is rated for a higher capacity it doesn't raise the capacity of your landing gear. Please note that the mounting hole spacing is 4" on center for this motor. For a similar motor, I recommend going with...
    view full answer...

  • Replacement Landing Gear Recommendation for Salem By Forest River
  • The part # RVLG-8000 is going to work well for you since you said the dimensions are the same. The motor kit for this set is part # M1230 and although it may mount differently it will work. The big thing with these kits is the dimensions matching where the landing gear attaches to the trailer. The standard measurement on landing gear legs is 15-1/2 inches between the tabs that are on the legs of the jack like what you see in the picture I attached.
    view full answer...

  • Electric Landing Gear Legs for a 2017 Sundowner 3H GN Super Sport Horse Trailer
  • For starters, the Bulldog Powered-Drive Kit part # BD1824200100 for single speed or part # BD1824180100 for two speed is only designed to work with Bulldog landing gear legs that have a 12,000 lb support capacity. If you do not have these legs than I cannot confirm the conversion kit will work for you. If you do have the above legs then there would be no reason to purchase a new system assuming the old one is in working order. You will have a fresh set of gears and wired remote if you...
    view full answer...

  • Replacement Landing Gear Motor and Gear Box Needed for a 2004 Keystone Montana 2980
  • I do have a solution for you, but unfortunately manufacturers don't keep that kind of information on file. You could try using a replacement gearbox like part # RVLG-RDBOX and the compatible motor # M1230 that fits Ram jacks, but without knowing the manufacturer and part number it would just be a guess as to whether it is the correct part or not. What I recommend doing is going ahead and just replacing your whole landing gear setup. It might be getting close to time to do that anyways...
    view full answer...

  • Is there a Way to Identify 5th Wheel Trailer Landing Gear with No Markings
  • It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you haven't already. Many landing gear parts are interchangeable among the different manufacturers but this is not always the case so identifying the manufacture and/or model number is important. Another option is to replace the landing gear with...
    view full answer...

  • Replacement Motor for Landing Gear on 2003 Coachman 5th Wheel
  • Manufacturers of 5th wheel trailers do not usually maintain detailed records of the landing gear they install but we do carry replacement motors that work for a wide range of brands like Lippert, Venture, Ram and others. Often a replacement motor from another brand will also work just fine too. I went to our warehouse to measure this motor's mounting hole spacing and the linked photo shows this 4-inch dimension. The part # M1230 is specified to fit both etrailer brand and Ram landing...
    view full answer...

  • Replacement Motor for Lippert Components Power Stabilizer Jack LC337199
  • Replacement motor # M1230 fits Ram brand landing gear # RVLG-8000 but not your Lippert Components Power Stabilizer Jack # LC337199. For a replacement motor for this stabilizer you will need Klauber motor part # LC352338.
    view full answer...

  • Replacement Parts for Landing Gear on 2006 Keystone Montana 5th Wheel
  • It sounds like you need a gearbox rebuild kit or a new gearbox for the landing gear on your 2006 Keystone Montana. The motor itself will not have a clutch mechanism. If the motor turns then chances are that the issue is downstream, in the gearbox or legs. You can try manually cranking the landing gear to see if they work properly under load. If not, then the gearbox is your most likely suspect. On the linked page for landing gear replacement parts you can click on either Gearbox, to...
    view full answer...

  • Replacement Landing Gear for a Keystone Laredo 5th Wheel Trailer
  • Bulldog Tandem Landing Gear Set # BD500162 is a great option for a manual set to replace the landing gear on your Keystone Laredo. I have linked a video review for you. The handle is not included so use # BD500203 to add the crank handle. For an electric set you could use # RVLG-8HDL and add motor # M1230 and, if you don't already have one, a switch # LC145236.
    view full answer...

  • Best Landing Gear Upgrade Options for 5th Wheel Trailer
  • We do have motors that you can add to your landing gear. For example, the Landing Gear Set # RVLG-8000 can be operated with the manual crank # RVLG-HDL but you can also add the motor # M1230 and switch # LG-145236 for effortless operation on your end. The next upgrade for landing gear is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This is rated for up to 12,000 lbs and operates via separate motors so you can easily level your 5th wheel trailer without using blocks like...
    view full answer...

  • Dimension Needed to Determine if Etrailer Landing Gear RVLG-8000 Fits Trailer
  • The etrailer Landing Gear Set, part # RVLG-8000 can be used to replace the landing gear set you have on your trailer most likely. Most landing gears are interchangeable but you can take a quick measurement to make sure this works for you. The weld stops measure 15-1/2 inches inside to inside and 17-1/2 inches outside to outside. For a landing gear with a manual crank included you can order part # RVLG-8HDL. You can add a motor to this landing gear. You would just need part # M1230.
    view full answer...

  • Is the etrailer.com Landing Gear Set RVLG-8000 a Replacement Fit for a 1998 Sandpiper 5th Wheel
  • Our Landing Gear Set - 20-1/2" Travel - 8,000 lbs # RVLG-8000 has the weld stops in the standard dimensions where the inside measurement of the weld stops is 15-1/2 inches and the outside measurement is 17-1/2 inches (see attached picture). Since we do not have access to every trailer and RVs landing gear specs you will need to go measure where the weld stops are on your current landing gear. These should fit though since they use the standard weld stop locations. You have the option...
    view full answer...

  • Recommended Motor Replacement For Landing Gear Motor 1RV-200
  • According to my research the ADTH 1RV-200 motor has a weight capacity of 6,500 lbs. The motor that you are looking at 12-Volt Motor Kit for Ram Landing Gear # M1230 will work for your ADTH 1RV-200 motor but this landing gear is rated at 8,000 lbs. Because the motor is rated for a higher capacity it doesn't raise the capacity of your landing gear. Please note that the mounting hole spacing is 4" on center for this motor. The recommended replacement motor for 1RV-200 motors is #...
    view full answer...

  • Replacement Motor Needed for an Atwood Motor MPD71119
  • From my research the replacement motor kit for your Atwood MPD71119 is the Lippert Tuson High Speed # LC141893. Our motor kit # M1230 will not fit because the mounting holes have a different spacing. We do have the replacement motor # LG-196308 from Stromberg Carlson that has a similar mounting hole spacing (4-3/16") but it only has a speed of 5,430 rpm and a capacity of 6,500 lbs. If this fits what you are looking for then you could potentially use this instead. I have linked a review...
    view full answer...

  • Troubleshooting Atwood Landing Gear Leg That Doesn't Move
  • It sounds like the screw itself is damaged if the motor and gears are turning but the leg isn't moving. Atwood no longer is in the 5th wheel landing gear business so I recommend replacing your landing gear completely. The reason you would need to change out your whole set is because both legs need to move at the same ratio so that your trailer raises and lowers evenly on both sides. Since replacement parts are already becoming scarce for Atwood landing gear it would be better in the...
    view full answer...

  • Replacement Landing Gear for 2010 Keystone Fuzion FZ322 Fifth Wheel Trailer
  • There is a way for you to determine the correct replacement landing gear for your 2010 Keystone Fuzion, though we do not have landing gear made specifically for your trailer. Instead, you will need to measure the mounting brackets on your trailer from outside to outside like in the attached diagram and choose the amount of lift and weight capacity that will work for you. For example, you may be able to use the Landing Gear # RVLG-8HDL, which has an 8,000 lb capacity, offers 20-1/2" of...
    view full answer...

  • Replacement Landing Gear Needed for Part # VMC900R-304103
  • If you are looking to replace your landing gear then I have a possible solution for you, we just don't carry any sets with the part VMC900R-304103 that you referenced. Our Landing Gear Set # RVLG-8HDL is rated for 8,000 lbs and has 20-1/2" of travel. This set comes with a manual hand crank, but if you are wanting for your landing gear to be electric then you need the 12V DC Motor # M1230 as well. To determine if this landing gear set is compatible with your 2008 5th wheel you simply...
    view full answer...

  • Atwood Landing Gear Replacement for 36" Long Landing Gear
  • To replace the Atwood landing gear on your 5th wheel trailer you will need to measure the distance between your weld stops. This is typically 15-1/2" on the inside and 17-1/2" on the outside (see attached photo). We do have replacement options but since Atwood is no longer in the landing gear business you need to replace your whole landing gear set to ensure that the gear ratio and strengths are the same. If your weld stop locations match the picture then I recommend using the 8,000...
    view full answer...

  • Solution for Needing Replacement Landing Gear for 2013 Starcraft Travelstar 278 BHS w Atwood 71125
  • Since Atwood is no longer in the landing gear business it is basically impossible (unfortunately) to get just a replacement leg. The part number that you gave me actually is a document that shows the various parts for Atwood landing gear, but nobody has information as to what those replacement parts are the equivalent of. Because of this I recommend replacing the landing gear on your 5th wheel trailer. This gives you some peace of mind that you won't have to replace any parts in the...
    view full answer...

  • Repair Kit for Atwood Landing Gear Leg
  • Atwood was sold to Dometic a few years back and replacement parts for older landing gear are scarce. We do still have Stromberg Carlson Landing Gear repair kit for the follow jack that will fit, part # LG-146060. For a lead jack repair kit use # LG-146059. Since repair parts will eventually be unavailable for this landing gear I suggest you consider replacing the setup with a new one such as # RVLG-8HDL which is rated for 8K. A motor kit can be added using part # M1230.
    view full answer...

  • Tube Size of etrailer Landing Gear RVLG-8000
  • Landing Gear # RVLG-8000 has an outer tube dimension of 2-1/2 inches and inner tube dimension of 2-1/4 inches. The drive shaft diameter is 1/2" and uses motor # M1230 which installs on gearbox # RVLG-RDBOX. I've added links to a couple review videos for you to take a look at as well.
    view full answer...

  • Width of etrailer Landing Gear Tubes
  • The Landing Gear Set w/ Handle # RVLG-8HDL has an outer tube width of 2-1/2" and an inner tube width of 2-1/4". It has a capacity of 8,000 lbs and can be outfitted with a motor # M1230.
    view full answer...

  • Replacement Landing Gear for Ram RVLG-8000 on a 2003 Keystone Laredo 5th Wheel Trailer
  • We actually have the exact replacement for the Ram RVLG-8000 landing gear on your 2003 Keystone Laredo 5th wheel trailer! The Landing Gear Set # RVLG-8000 is what you are looking for. It has the exact same weight ratings and spacing between the weld-mounts. This landing gear comes with a gearbox but if you need to replace the manual crank, 12V motor, or need a switch, those parts are # RVLG-HDL, # M1230, and # LG-145236 respectively. Attached is a picture of the dimensions for the...
    view full answer...

  • Does Replacement Motor for Stromberg Carlson Electric Landing Gear Have Slip Clutch
  • The Replacement Motor for Stromberg Carlson Electric Landing Gear # LG-196308 that you referenced, as well as the other replacement landing gear motors, will not have a slip clutch like your RV1-200 motor. This motor will be a great replacement so long as the mounting hole spacing on your current motor is the same at 4-3/16" on center (measured diagonally, straight across). If you have a different mounting hole spacing you can use the Replacement Motor # LG-142178 which has 4-1/8" spacing...
    view full answer...





  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Photos by:
Zach O
Updated by:
Sarah W
Written by:
Amanda M
Updated by:
Hannah L
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.