Replacement 8-Hole Rubber Chain Straps for Yakima Bike Racks - Qty 3
(220 reviews)
Price: $6.83
In Stock
Replacement 8-Hole Rubber Chain Straps for Yakima Bike Racks - Qty 3
Item # 8890221
Our Price: $6.83
Orders above $50 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (220)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Yakima Accessories and Parts - 8890221
- Trunk Bike Racks
- Straps
- Yakima
Replaces the 8-hole, rubber bike tie-down chainstraps for your Yakima bike rack. Works with BigHorn, BuckHorn, FlipSide, KingJoe, QuickBack, SwingDaddy manufactured before 2016, and SuperJoe bike racks. Includes 3 straps.
Features:
- Replaces the 8-hole, rubber bike tie-down chainstraps for your Yakima bike rack
- Works with BigHorn, BuckHorn, FlipSide, KingJoe, QuickBack, SwingDaddy manufactured before 2016, and SuperJoe bike racks
- Includes 3 chain straps
Fits:
- Yakima BigHorn: Y02404 and Y02405
- Yakima BuckHorn: 8002442 and 8002430
- Yakima FlipSide: 8002426
- Yakima KingJoe: 8002619 and 8002620
- Yakima QuickBack: 8002621 and 8002622
- Yakima SwingDaddy manufactured before 2016: 8002464
- Yakima SuperJoe: 8002616 and 8002614
8890221 Replacement 8-Hole Rubber Chain Straps for Yakima Bike Racks - Quantity 3
Video of Replacement 8-Hole Rubber Chain Straps for Yakima Bike Racks - Qty 3
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Yakima Replacement Parts - Chain-Style Rubber Bike Straps - 8890221
Today, we'll be taking a quick look at the replacement chain straps for Yakima bike carriers. These are going to fit your older style Yakima carriers. It's going to be a direct replacement for those rubber chain-style straps. They're still going to have a little bit of stretch that allows you to get your bike mounted up and stay secure on your Yakima rack. We'll get three straps in one, or three straps total. Those are each going to have the same measurements, which'll be about nine inches long from the very end to the very top.
The distance from that first hole to our handle portion, that's about eight inches from the center of that hole. The diameter of each of the mounting holes is about half an inch. Holding that up so you can see it there. Half an inch for the diameter. The outermost portion of our strap measures about an inch and a quarter wide.
And they're about a quarter of an inch thick.This is going to fit the Yakima BigHorn, the BuckHorn Elite, and the Yakima SuperJoe and KingJoe series trunk-mount racks. This'll get you back out on the road enjoying your Yakima rack and keeping all of your bikes secure at all those points for the cradles. If you need any other replacement parts for your Yakima bike rack, check out etrailer.com. We have a lot of options available for any of your replacement part needs. That's going to do it for our look at the replacement chain straps for Yakima bike carriers..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Product did not meet expectations
Customer Reviews
Replacement 8-Hole Rubber Chain Straps for Yakima Bike Racks - Qty 3 - 8890221
Average Customer Rating: 4.8 out of 5 stars (220 Customer Reviews)
Replaces the 8-hole, rubber bike tie-down chainstraps for your Yakima bike rack. Works with BigHorn, BuckHorn, FlipSide, KingJoe, QuickBack, SwingDaddy manufactured before 2016, and SuperJoe bike racks. Includes 3 straps.by: James02/03/2022
The saddles I ordered did not work. I can’t use the bike rack.
Comments
I am happy to help you with the chains straps. Can you tell me the model name of the bike rack that you have?
-- 
Jenny N - 02/16/2022It is a Yakama 4 bike hitch rack.
-- comment by: James - 02/16/2022Would it be possible to send a picture of the bike rack? Yakima has made several different 4 bike carriers in the past.
-- Jenny N - 02/16/2022I am in Arizona for the winter the rack is in Illinois. I did previously send you all pictures of the rack and the saddles. I will check to see if I still have the pictures.
-- comment by: James - 02/16/2022I did hear back from Yakima who believes that you have the double down 4 model 8002424. Which means that the chain straps should have worked for you. Can you tell me in more detail what happened when you tried to use them?
-- Jenny N - 02/16/2022by: Charles 06/23/2021
When Yakima discontinued my bike rack, they also discontinued supplying the straps. Luckily, etrailer still had the straps in stock so I didn't have to go without or ad lib replacements just to keep using the rack.
Comments
No issues
Charles W - 06/24/2022by: Leon08/05/2020
Perfect fit, thank you etrailer.com! Now I can get 10 more years out of this bike rack!
Comments
Still working like a charm!!
Leon - 08/06/2021by: Nate10/02/2022
Didn't fit my Yakima rack
Comments
What kind of Yakima rack did you get this strap for? Just to be clear, this strap works for these Yakima racks Yakima BigHorn part # Y02404
Yakima BigHorn 4 Bike Hitch Mounted Tilting Rack w Frame Mount Cradles for 2" Hitches
$212.98 and part # Y02405
Yakima BigHorn 4 Bike Hitch Mounted Tilting Rack w Frame Mount Cradles for 1-1/4" Hitches
$217.52 Yakima BuckHorn part # 8002442 and part # 8002430 Yakima FlipSide part # 8002426 Yakima KingJoe part # 8002619 and part # 8002620 Yakima QuickBack part # 8002621 and part # 8002622 Yakima SwingDaddy manufactured before 2016 part # 8002464 Yakima SuperJoe part # 8002616 and part # 8002614
-- Yakima BigHorn 4 Bike Hitch Mounted Tilting Rack w Frame Mount Cradles for 2" Hitches
$212.98 and part # Y02405
Yakima BigHorn 4 Bike Hitch Mounted Tilting Rack w Frame Mount Cradles for 1-1/4" Hitches
$217.52 Yakima BuckHorn part # 8002442 and part # 8002430 Yakima FlipSide part # 8002426 Yakima KingJoe part # 8002619 and part # 8002620 Yakima QuickBack part # 8002621 and part # 8002622 Yakima SwingDaddy manufactured before 2016 part # 8002464 Yakima SuperJoe part # 8002616 and part # 8002614
Brooke M - 10/14/2022by: Tim 09/02/2022
Just the replacement pieces I needed to keep my Yakima rack functional
by: SteveP09/09/2022
OEM quality at a fraction of other online prices. Pay's to check around. etrailer came through again.
by: Raul 09/13/2022
The replacement parts fit perfect.
by: Trina07/15/2022
These straps were easy to replace and feel like a heavy duty version of what originally came on our bike rack. Thanks for keeping these old parts in stock!
by: Julie09/30/2021
Straps were the same as originally purchased with my Yakima carrier. Great quality, very quick turnaround
by: Bruce 07/06/2022
Seens the 4th hole broke on my old straps, these are what I needed to keep on cycling all over DMV area, I hope these last 10 years like my others because they work great. Thanks
by: Jeff01/29/2022
This replacement strap was about 4-6" shorter than the Yakima part I needed to stretch all the way over the bike forks. I'll need to figure out a work-around.
Comments
You mentioned that the straps were 4 to 6 inches shorter than the strap you needed. I wanted to ask you a few follow up questions. Do you know the model name of the bike rack that you have? How long is the strap that you want to replace?
-- Jenny N - 02/01/2022Yes, it is the Yakima HangOver 6-Bike Hitch Rack. Here are pictures of the rack and the straps that are used. Im not near the rack right now, but I can get the measurements later this evening.
-- comment by: Jeff - 02/01/2022Great! - You do not need to measure as knowing the model is very helpful. I do have one more question though. Was your Hang 6 bought before or after August 2020?
-- Jenny N - 02/01/2022Before August 2020.
-- comment by: Jeff - 02/01/2022It turns out that I do not have the strap on our site currently. I am having it added and once it is I can let you know the part number and lead time. The strap for models made before August 2020 are different then the straps made after 2020
-- Jenny N - 02/01/2022
by: Donald 10/01/2021
Just what I needed.
Comments
These things hold up. I anticipate getting several years out of the straps I purchased last year.
Donald - 10/02/2022by: Laszlo02/17/2022
Excellent straps. I use them to secure our bikes in the bed of the pickup. Although intended specifically for a Yakima rack, their design lends itself to more universal applications. The shipping from etrailer.com was very prompt, and overall I was very pleased with my experience. Therefore I will shop again from etrailer.com in the future.
by: Barbara02/28/2022
STRONG!! We use our bike rack a lot and these last forever. Our rack is stored in the garage, as with anything, if these are left out in the sun and weather, you might not get as much use.
by: Dennis 10/08/2022
All the items were fine and I would buy them again.
by: Todd11/11/2021
These are genuine Yakima hold down straps at a great price. Why shop [online] when you can find a better deal at etrailer. That's right, even with shipping etrailer had a better price. And NO I was not paid to write this. I've noticed over the last year or so that [online] is not always a better deal, shop around.
by: Virgil04/12/2022
It was great that I was able to track the order from beginning to end.
The order was executed perfectly.
by: David02/23/2022
Whether you need items great or small, etrailer always comes through. They treat all orders with the same great speed and attention.
by: Justin 08/06/2022
Easy replacement part
by: Rich 09/01/2022
Exactly what I needed. Delivered in a timely manner.
by: David09/27/2021
These original replacement parts keep my Yakima bike rack looking and working like new. I have found that etrailer.com consistently has the parts I need to keep my equipment looking and working like new. Five star equipment and service!
by: WaxRes12/13/2020
Great replacement straps at a great pri ce!
Comments
No issues.
WaxRes - 12/14/2021by: P the Biker07/14/2021
The straps work great, and have given us more use from the bike carrier than we had expected. Used them to haul my bike cross country to San Diego earlier this year - strong and sturdy all the way.
by: Susan 07/17/2021
It was wonderful to get the replacement parts we needed. Our bike rack is used frequently and for long distances. We know our bikes are secure on the rack.
by: Matt05/04/2021
Straps arrived quickly. They are exactly as described and fit my Yakima Nike rack. I have bought several items for my truck and camper from etrailer in the past and have had great success. I have dealt with their customer service on one item and was impressed by their speed in processing my return. I recommend etrailer and plan to look first at their website before Another online retailer.
25
220
Show More Reviews
See what our Experts say about this Yakima Accessories and Parts
- Replacement Strap For Rhode Gear Bike RackYakima used to own the Rhode Gear line of bike racks so the # 8890221 should work well as a replacement strap based on that and the measurements of the strap. This strap is 9 inches long and has holes that are 1/2 inch wide. I attached a picture that shows the dimensions of the strap as well.
view full answer...
- Replacement Cradle Strap Recommendation for a Rhode Gear Super ShuttleYakima used to own the Rhode Gear line of bike racks so the # 8890221 should work well as a replacement strap based on that and the measurements of the strap. This strap is 9 inches long and has holes that are 1/2 inch wide. I attached a picture that shows the dimensions of the strap as well. The holes will be slightly smaller but will still stretch to fit.
view full answer...
- Attaching the Yakima Bike Rack Cradle Strap to a CradleTo attach the strap, # 8890221, to a cradle on a Yakima bike rack, start with the round end of the strap. The cradle will have mounting mounts for the strap located on the forward and rearward parts of the cradle. Start the hole at the end around one of the mounting points on the cradle and then pull, very hard, to stretch out the hole and pull the strap onto the mounting point on the cradle. Then, place the bike on the cradles like in the video I have linked. Pull the strap over the frame...
view full answer... - How Long are Yakima Replacement Rubber Chain Straps and what is the Hole DiameterFor the Replacement Rubber Straps for Yakima Bike Racks with SwitchBlade Cradles QTY 2, # 8890221, the holes are 1/2 inch in diameter and it is 9 inches long. These straps can be found on Yakima SwingDaddy, FlipSide, DoubleDown, BigHorn, QuickBack, KingJoe, and SuperJoe bike racks, or any Yakima bike rack that uses SwitchBlade anti-sway cradles.
view full answer... - Replacement Rubber Chain Straps For Yakima Spare Time Bike RackI reached out to my contact at Yakima and they advised me that the only replacement part for the Spare Time Bike Rack are the Replacement Rubber Chain Straps for Yakima Bike Racks with Anti-Sway Cradles # 8890221. This part replaces damaged or worn straps on any Yakima anti-sway cradles. When I reached out to my contact at Yakima they informed me, if you needed an entire cradle, they are no longer available.
view full answer... - Availability of Replacement Straps for Rhode Gear Bike RackI recommend taking a look at the Yakima Replacement Rubber Chain Straps # 8890221. This replacement strap is not specifically designed for Rhode Gear Racks, however Yakima used to actually own Rhode Gear so there's a good chance these will work well. There is no longer a direct replacement strap available for the Rhode Gear bike racks. In order to see if this will work, I recommend taking a couple quick measurements on your existing strap. This replacement measures 9 inches from end to...
view full answer...
- Replacement Rubber Cradle Strap for Rhode Gear Spare Tire Mount Bike RackThank you for providing a photo of the RhodeGear bike cradle strap you are looking to replace. The Yakima replacement rubber strap you were looking at, part # 8890221, is a set of three straps. Overall length tip-to-tip is 9 inches and hole diameter is 1/2 inch. It may be possible that your existing strap has stretched from use; typically rubber-based compounds will stretch from age and wear and will tend to fit more loosely after they have been in service. Please take a look at the included...
view full answer...
- Which Replacement Cradle Straps for Yakima BigHorn Manufactured in 2002According to my Yakima Representative, the correct cradle straps for their BigHorn bike racks manufactured after 2001 would be the part # 8890221.
view full answer... - How to Replacement Chain Straps for Yakima Bike Carriers WorkThe Replacement Chain Straps for Yakima Bike Carriers # 8890221 are actually attached to the cradles and are used to secure your bike to the bike rack. The word "chain" is just talking about the style of strap this is. I've attached a photo of where these straps would be located on a Yakima bike rack.
view full answer...
- Replacement Strap for Curt Bike Rack that is More StretchyYou could try the Yakima bike rack straps part # 8890221. These should work fine on your Curt rack and should also be a bit more stretchy.
view full answer... - Availability of Replacement Cradles and Straps for Yakima BigHorn 4 Bike RackWe do have the replacement rubber straps for your Yakima BigHorn Bike Rack with part # 8890221, however the replacement cradles are no longer manufactured by Yakima. Since this particular rack is no longer in production, your best option is really going to be with a new rack if your existing cradles are damaged. For a hanging-style rack similar to the BigHorn I recommend taking a look at the Yakima RidgeBack 4 Bike Rack # Y02458. This rack features anti-sway cradles to provide excellent...
view full answer... - Are Cradle Straps Included With Replacement Cradles for Yakima KingJoe Trunk Mount Bike RackYakima doesn't include the straps with the # Y8890153 KingJoe replacement cradles. The replacement straps are sold in a quantity of 3 as part # 8890221.
view full answer... - Replacement Frame Cradle for an Older Rhode Gear Ultra Shuttle Bike RackThe Rhode Gear Replacement Control Block for Super Shuttle Bike Racks, # RG8890084, have a 15/16 inch diameter. 15/16 of an inch in decimal form is .937, so this should work well for you.
view full answer... - Replacement Rubber Straps needed for a Yakima 2 Inch Hitch Bike RackThe bike rack model name or part number would be a big help here, but I believe we have what you are looking for. I went out to the warehouse and got a set of the Replacement Rubber Straps for Yakima BedRoc and Older Big Horn Models, # Y8820103, and measured them for you, see photo. These straps are 7-3/4 inches long 1-1/4 inches wide and the holes in the straps are 3/4 inches diameter. Yakima also has the strap you mentioned which is 9 inches long, and has 1/2 inch Holes, item # 8890221,...
view full answer...
- Replacement Rubber Straps for Rhode Gear Hitch ShuttleI have a recommendation for you but the original replacement rubber straps are hard to come by. The brand was acquired by Prorack and dissolved a while back. However, we do have OEM replacement cradles for Rhode Gear Shuttle Racks # RG8890084. This comes with the rubber cradle and fabric hold down straps. If you are looking for a rubber strap, the best option, which is not an exact replacement, is the Yakima Rubber Strap # 8890221. We offer these straps in a set of three.
view full answer... - Which Straps Fit Replacement Yakima Bike Rack Cradle, # Y8890153The replacement straps you will need for the Replacement Cradle, # Y8890153, are the Replacement Rubber Straps, # 8890221. It comes with 3 straps. The cradle is 1 cradle assembly.
view full answer... - Will the Yakima Cradle Set # Y8890158 Fit on a Little Joe Bike Rack and How Many Cradles in PackageThe Yakima Replacement Cradle, # Y8890158, comes with a set of cradles for 1 bike. You get two cradles, one with the anti sway cradle and one cradle without the anti sway bracket. To use these cradles you would need two packages of the Replacement Rubber Straps, # 8890221, because the anti sway would use a rubber strap as well. I went out to the warehouse and pulled one of the two remaining LittleJoe bike racks that we have, this rack is being discontinued, and a cradle set and found that...
view full answer... - Availability of Replacement Strap for Rhode Gear Bike RackWhile we no longer can get replacement Rhode Gear bike rack straps we do know that the Yakima strap part # 8890221 does work based on customers we've had who've have successfully used them.
view full answer... - Replacement Straps for a Bike Carrier and Montague Mountain Bike with 4 Inch Tall FrameI measured the amount of space from the bottom of a cradle to the strap in the widest position and on # HR750-P it was only 2-3/4 inches unstretched so it would not work with a 4 inch tall frame. Straps # 8890221 are 9 inches long so you are looking at approximately 4-1/2 inches of possible space, depending on the cradle, minus about 1/2 inch for the material at the ends of the straps and that takes it down to approximately 4 inches, loner when stretched. I believe this set is going to...
view full answer... - Possible Replacement Bike Strap for Rhode Gear Bike RackWe have other bike rack manufacturer's straps that may work for you since the Thule # 852-3006-001 strap did not work well on your Rhode Gear bike rack, but unfortunately we do not have any replacement straps that are confirmed as a replacement for your Rhode Gear bike rack. Since there are not confirmed fit replacement parts available, finding the best replacement strap can be hit or miss. We know the Thule strap did not work well for your bike rack, so if you'd like to try another strap...
view full answer... - Replacement Straps for Rhode Gear Bike RacksThe best option for you, since there are no direct replacements available, is likely going to be the replacement rubber chain straps from Yakima # 8890221, though you could also take a look at the straps from Thule # 852-3006-001 and determine what would work best for your rack.
view full answer... - Can Longer Strap Be Used on the Hollywood Racks Over-the-Top Trunk Mount Bike RackBased on the replacement straps we have available the Yakima straps # 8890221 would be the best option though they are not tested for use on the Hollywood Racks Over-the-Top rack # HRF2-3. This strap is 9 inches long with 1/2 inch diameter holes. Another option is to supplement the rubber straps with hook and loop straps such as # SR54FR. These straps are 16 inches long overall. And a third option and what I recommend is to use an adapter bar, # 64005, with your daughter's bike so that...
view full answer... - Replacement Rubber Straps for Older Rhode Gear Super Shuttle Bike RackOriginal replacement parts for Rhode Gear racks are rare these days since the brand was acquired by Yakima and then dissolved some years back. We do still have some OEM parts like their Replacement Cradle for Rhode Gear Super Shuttle Racks # RG8890084 and their Replacement Stabilizing Strap # Y8890253 but for rubber straps the best option, which is not an exact replacement, is Yakima's # 8890221. We offer the straps in a set of 2, so you'll want to order a quantity of two to get the four...
view full answer... - Replacement Hitch Pin and Rubber Straps for the Yakima BigHorn Bike RackBased on your photo, it looks like you have an older Yakima BigHorn and we have all the parts you need to get your bike rack in working order. For a Hitch Pin you will need the Yakima Replacement Tongue and Pivot Hardware # Y8780018. This is the exact replacement hitch pin for your 1-1/4" bike rack. For rubber straps, you will need the Yakima Replacement Rubber Straps for Older BigHorn Models # Y8820103. These are a direct replacement and we sell these straps in pairs. So if you are...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
DeAnne T
Video Edited:
Kathleen M
Updated by:
Wilson B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-496-5010
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.