Replacement Damper for Titan Aero 6000 and 7500 Actuators

Ask the Experts about this Titan Accessories and Parts

• Replacement Damper for a Titan Aero 6000 Actuator
  If you can verify that the clunk noise is coming from the actuator, then a faulty damper would be the likely culprit. The damper controls the movement of the coupler into the actuator. The correct damper for your Titan Aero 6000 actuator is part # T4502000. The Aero 6000 changed to the Aero 7500 and the part number for the damper changed. I verified with my contact at Titan that this damper will fit the Aero 6000. Titan does not provide instructions on how to replace these parts,...
  view full answer...
• Correct Replacement Shock for Titan Aero 7500 Brake Actuator
  The correct replacement shock for the Titan Aero 7500 Brake Actuator T4606520 would be the Replacement Damper Shock Absorber for Titan Aero 6000 and 7500 Actuators # T4502000.
  view full answer...
• How Is the Replacement Damper for Titan Aero 6000 and 7500 Actuators Measured
  In regards to the Replacement Damper for Titan Aero 6000 and 7500 Actuators part # T4502000, the 6-1/4" extended and 4-15/16" compressed length is measured from the center of the mounting point.
  view full answer...
• Replacement Parts for Discontinued Titan Aero 6000 Brake Actuator On 2004 MasterCraft Boat Trailer
  For your Titan Aero 6000 brake actuator, you will need the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum # T4395100. The 7500 and 6000 use the same parts for the master cylinder. It sounds like you also need the Replacement Damper for Titan Aero 6000 and 7500 Actuators # T4502000.
  view full answer...
• Replacement Parts for Dico Aero 6000 Disc Brake Actuator on Four Winns Boat Trailer
  We do have some parts for the Dico Aero 6000 actuator on your Four Winns boat trailer: Replacement Master Cylinder - # T4395100 (you have to remove the check valve) Replacement Damper - # T4502000 Replacement Lock Spring - # T4501400 Replacement Bolt - # T4811500 With that being said, I'm pretty sure that you would need more parts as well (as I don't know everything you are trying to replace) so since that is the case your best option is to go ahead and replace your actuator. For...
  view full answer...
• Troubleshooting Disc Brakes with Aero-6000 on Four Winns Boat Trailer Dragging/Overheating
  The #17 nut that you are referring to for your Aero-6000 actuator (similar to part # T63FR) looks like it simply helps to keep the latch in place. If you are having problems with your brakes dragging and overheating then either your disc brakes/caliper need to be cleaned, your breakaway cable has been activated, or the internal components of your actuator are needing replacement. If you check your brakes/calipers and breakaway cable isn't activated then the only internal components...
  view full answer...
• Can the Titan Aero 6000 Surge Brake Actuator Be Repaired Or Should It Just Be Replaced
  For a Four Winns Boat Trailer with Titan Aero 6000 Surge Brake Actuator, I recommend replacement using the Titan Zinc-Plated, Leverlock Brake Actuator part # 099-175-20 which is ready to go as is and will be a great fit. The reason I recommend replacement is because of the availability of spare parts. Although we do have the Replacement Damper part # T4502000 and Replacement Master Cylinder part # T4395100 (Confirmed for Aero 6000), there are still several other smaller parts that could...
  view full answer...
• Troubleshooting Dico Aero 6000 Surge Brake Actuator that Clunks and Brakes Get Hot
  Most likely it's just the shock since you described clunking and the brakes not fully releasing as that's a textbook symptom of a bad surge brake shock. Since you have a Dico Aero 6000 actuator the correct replacement shock would then be the part # T4502000. If you do determine it's the master cylinder or you just want to replace it now while you have it apart you'd want the part # T4395100 for if you have drum brakes or part # T4714200042 for if you have disc.
  view full answer...