Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement latching mechanism works with Dexter Multi-Fit couplers and brake actuators. All necessary hardware included.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff from etrailer.com. Today we're gonna take a look at this latch repair kit for the Dexter multi-fit couplers and brake actuators. Now this kit here will let you repair a damaged hitch ball latch assembly on your coupler or actuator. This part will work with the Dexter multi-fit couplers and trailer brake actuators and it will also fit the Dico and Demco Model 60 hydraulic actuators. These parts are a cast construction with a nice zinc finish.
The kit will include everything laid out here on the table. It'll include the hand wheel, the hand wheel lock, the ball latch, the ball latch spring, bracket retainer, a hex bolt, the hex screw, and then the two hex nuts. Now the size on the hex bolt is three and a half inches long, which is measured from under the head to the end of the bolt. So if we put a ruler on that, there's your three and a half inch measurement. The diameter is a half inch diameter and on the screw it is two and five-eighths inches long and a seven-16th's diameter.
But that should do it for the review on the latch repair kit for the Dexter multi-fit couplers and brake actuators.
Average Customer Rating: 4.7 out of 5 stars (79 Customer Reviews)
Replacement latching mechanism works with Dexter Multi-Fit couplers and brake actuators. All necessary hardware included.This didn't come with the hog ring to keep the know from spinning all the way off and Threaded bolt for knob wasn't drilled for hog ring. I Had to reuse my original bolt and put a cotter pin in it.
I was very happy with the part, but what I found more beneficial was the video to assemble this.
The video was in the description.
Thank for the fast service, quality parts, and very helpful video instructions.
the latch kit came for the second time missing the same two parts the half threaded bolt with predrilled hole and the hog ring
Jenny N.
3/27/2023
We definitely need to get to the bottom of this for you. I will have our Customer Service team reach out.
Hello.
Item as described. Timely shipping across the states. Well packaged. Works really great now on the tow dolly. Other part was all rusted up. With these replacement parts fixed it up now.
Thank You.
Randy Adversalo
Installation was smooth and simple. A couple parts were incorrect but worked, however the eTrailer team promptly sent a replacement. Best online customer service I've ever experienced--will be using eTrailer exclusively moving forward
Thank you very much for covering my order in a timely manner. I have purchased for years from your company. Very great to deal with.
product arrived very quickly and was in good shape. have not put it on trailer yet, but should be very easy to install. it's just what I needed to repair the coupler on pontoon trailer. thank you
Gene H.
5/29/2016
working out great, very easy install and totally fixed my problem with my trailer..
Great parts 1st time around
Great service
Shipped promptly
I have gotten two of these and they do not come with the correct bolt. The bolt in both kits was fully threaded and that causes latch to catch and not work well
Fast shipping, just as described.
Didn’t get parts described online and in the video. Came with a way to long bolt & nut. Not the correct bolt with hole for the hog ring. All I really needed was the tongue part so went ahead and used but disappointing I paid for a complete replacement & didn’t get it.
Shipped immediately with tracking. Priced fairly. Video instructions for installation. What's not to love!
Package showed up when they said it would, and it had all the parts in it. I would recommend this company, and will use them again for trailer parts.
Great It saved me. I couldn't find the parts any where. I searched for 2 days on the web then a neighbor told me to check with you. You had the parts with a little looking. Didn't have to weld in a new hitch. Thanks
The hitch replacement parts saved me from having to change my hitch setup. An rv store in Montana was not aware of you when they for us. They should. You are a great source for older trailers like our 1960 Airstream. Got the parts quickly and were exactly as ordered.
More then I needed...everything I needed & great customer service !!! Thank you...
Product worked as described. I used this item on a dico model 60 hitch coupler. Instead of the c clip I used a cotter pin.
Still working great after a year of using the latch repair kit. Easy to install just a few minutes to repair.
This was a perfect fit, replacement for my damaged ball latch. I could not find it locally.
We have been looking for replacement parts for our Dico Trailer. You are the only ones who actually said, yes we have the parts you need. We are very happy!
Works great! Must have to replace the old rusty parts for some smooth operation. Critical for this style ball hitch.
Worked great for my repair even though I did not have a hydraulic coupler
Well made, good quality product, fits the application. Perfectly.
This product had the parts I needed to fix my broken receiver. A diagram would have been useful to me since I had never worked with this part of my trailer.
Parts kit fit my trailer tongue perfectly and was easy to install.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
5/22/2023
I reached out to Dexter about the experience with the kit and they advised that the hog ring is included with the kit as well as that the bolt should be long enough. They are sending the parts to me and once I have them, I can have them sent to you.