1. Accessories and Parts
  2. Titan
  3. Brake Actuator
  4. Master Cylinder Parts
  5. Master Cylinder
  6. Drum Brakes
Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators - Drum

Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators - Drum

lowest price pledge
Our Price: $244.36
Accessories and Parts
This item qualifies for Free Shipping
Shipping Weight: 9 lbs
Quantity: 
Titan Accessories and Parts - T2374600
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This replacement assembly fits Titan Model 10 and Model 20 trailer brake actuators for drum brakes. Call 800-298-1624 to order Titan accessories and parts part number T2374600 or order online at etrailer.com. Free expert support on all Titan products. Guaranteed Lowest Price and Fastest Shipping for Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators - Drum. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (92)
  • Q & A (30)
  • Videos (2)
  • Photos
  • Why etrailer?

Titan Accessories and Parts

  • Brake Actuator
  • Master Cylinder Parts
  • Master Cylinder
  • Titan
  • Drum Brakes

This replacement assembly fits Titan Model 10 and Model 20 trailer brake actuators for drum brakes.


Features:

  • Works with Titan Model 10 and Model 20 brake actuators
    • Drum brake models only
  • Also fits Dico Model 10 and Model 20 brake actuators
  • Measures 4-3/4" on mounting hole centers
  • Includes:
    • Master cylinder
    • Orifice connector
    • Right-hand bracket assembly
    • Left-hand bracket assembly
    • Hex bolt: 3/8" diameter
    • Lock washer: 3/8"
    • Hex nut: 3/8" diameter
    • Plastic cylinder cap


2374600 Titan Model 10/Model 20 Master Cylinder Kit - Drum

Item # T2374600





Video of Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators - Drum

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Titan Master Cylinder Assembly Installation

Speaker 1: Today we're going to be taking a look at and showing you how to install the Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators. Part Number T2374600. Now this is going to be a replacement for the Titan Model 10 and Model 20 Brake Actuators, and it's going to work for Drum Brakes only.It is going to come with a plastic filler cap, we can fill our brake fluid right here. So our master cylinder is going to send fluid out to our brakes making sure that they apply whenever we need them to. And the reservoir that is built in is going to hold all the fluid making sure that we have enough supply to supply our brakes with enough fluid. The master cylinder is also going to work with the Dico Model 10 and Model 20 Actuators.

And it's going to be a great replacement for your worn or possibly broken master cylinder. As you can see here, ours definitely needed a replacement. We started to have some rust build up, and the rod actually isn't going to go in at all no matter how hard we push, so we're not going to be able to rely on this to actuate our brakes.The brackets on the side are going to be pre-installed making installation that much easier. The hardware to mount the actuator is not included, so you will need to provide that. Now to make sure this will fit your trailer the mounting holes on each side are going to be 4 3/4" set apart center on center.

The first thing you're going to want to do is find the cap on your actuator, remove it and make sure there's no fluid inside the master cylinder. Then we can start removing the line that's at the back of our master cylinder. Now for this you're going to want to grab a 5/8" wrench and either an adjustable wrench or another 5/8" wrench to hold the fitting that's on the back of the master cylinder itself.Then we're going to have two bolts on each side that are going to be holding it in place. We're going to need to remove those and our application it's going to be a 1/2" head. So we're going to grab a 1/2" socket and ratchet and remove those bolts.

And we're going to hold on to these so we can reinstall them with the new master cylinder. Now the master cylinder is freed up and it should be able to come out, but if yours is like ours it may be a little rusty and a little tight to come out. You just want to take your time and work at it until you can pull it all the way out. Now it would be a good idea to clean out any kind of debris, dirt, rust or anything else that would be collecting from maybe storing your trailer outside or just from over years of having your trailer. You want to clean all of that debris out.Now with the master cylinder out you're going to want to make sure that the coupler is pulled all the away from the trailer, you're just going to grab it, pull it out.

And then we can get ready to put our new master cylinder in.So we're going to put it in the same way that we took the old one out. First we're going to remove the cap. And you'll notice that on the brackets here on the side they are labeled. That's going to have an L for left and an R for right. So we can take our master cylinder and making sure that the shaft is pointing toward the coupler, we're going to slide it in place. And again it may be a little bit of a tight fit just because of the rust and debris from over time. We're going to put it in place and we're going to line up the four holes with the holes that we took the bolts out of earlier. So with our holes lined up and our master cylinder inside the coupler we go and take our bolts that we removed earlier and reinstall them.So we're going to come back with our 1/2" socket and wrench and tighten up those four bolts. So if you're going to be hooking your master cylinder up to an already existing brake line or brake assembly is already in place, go ahead and do that. And then we can fill our master cylinder up and begin the bleeding process. However we're going to be replacing the brake lines on our trailer so we're going to get those in place and then we'll show you how to bleed them.So with everything tight and everything in place we can go ahead and fill up our master cylinder and start bleeding our brakes. So you're going to want to grab and extra set of hands and they're going to manually operate the actuator up front while we open up the bleeders at the brake assemblies. Now when you are operating the actuator back and forth you want to make sure that the reservoir stays full of fluid that way you don't get any more air in the lines. Start with the farthest wheel position away from the master cylinder or the longest brake line moving further forward or to the shortest brake line. Our bleeder's going to be right here at the back of our brake assembly, underneath this red cap. So we can just pull off this red cap. I'm going to use a hose with a bottle attached.Now I've got a little bit of brake fluid in here so I can see the bubbles coming out and making sure that it's not just fluid and that the air is coming out of the system. So we can put the end of the hose right on the end of our bleeder but still leave us enough room so that we can open it up. So we're going to use a 3/8" wrench to open up that bleeder valve and we're going to want to do this until we have a solid stream of fluid coming out. Then we're going to close the valve and cycle the actuator so we can see the bubbles coming out of the bottom here which is what we want. It's just going to take a little bit of time to keep pumping until we just get a solid stream of fluid, no more bubbles.And that will finish up your look at the Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators, Part Number T2374600.


Customer Reviews

Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators - Drum - T2374600

Average Customer Rating:  4.9 out of 5 stars   (92 Customer Reviews)

This replacement assembly fits Titan Model 10 and Model 20 trailer brake actuators for drum brakes.

- T2374600
by:

It appears to be the correct part however the metal rod with rubber boot is missing (see circled section in photo). It may have fallen out of the box in transit since it was taped up so poorly and the USPS delivered it looking like they tore the box open. Probably should have been secured in the box a lot better than one piece of tape wrapped once because of the weight of the item. Probably the worst I have ever received a package from eTrailer so I know this isn’t normal.


Comments
Hi Robert, Thanks for your feedback! Our customer service team will be reaching out to you.
-- Etrailer Expert Tyler M - 03/30/2021


- T2374600
by:

Video very helpful! On time delivery! Did not have to replace entire actuator. Thanks



- T2374600
by:

Very good replacement for original part.



- T2374600
by:

identical to original, bolted right in, great service



- T2374600
by:

exactly what we needed for our twenty year old trailer. Identical replacement.



- T2374600
by:

Part fit perfectly. Slid in where old one was. Hand started 4 bolts then brake line snugged bolts then brake line. Bled system with my vacuum brake bleeder. Worked perfect pulling our cruiser



- T2374600
by:

Exact fit and works like a charm. Never thought I'd find the entire assembly until looking on etrailer - they have everything! East install, added brake fluid, actuated cylinder and installing new brake fluid into my brand new lines was a snap! Looking forward to many years of useful service out of this. Plus I ordered the cover to keep it away from the elements.



- T2374600
by:

This was the exact master cylinder I needed for my hitch that was 23 years old. I was afraid I wouldn't be able to find the correct one, but this was perfect. The fit was snug, but correct and was a direct replacement for my old one that was no longer functional.



- T2374600
by:

I found this sight just looking for a question answered, not only was it answered but the part I needed was in stock. I wish i had found them earlier when i was replacing the rear shoes and cylinders. No offense to NAPA but I could have bought a whole backing plate assembly ready to bolt on for a fraction of the money I spent buying the parts individually. etrailer.com has been saved in my list of favorites


Comments
Well I installed it on a customers trailer and he hasnt been back to complain, so that makes me happy!????
KEVINS C - 07/22/2016



- T2374600
by:

The replacement part for my brakes fit perfectly and I installed it in just a few minutes. Works great as designed.


Comments
My parts are working very well. Ive been in lots of saltwater and the brakes are working just fine. With regular rinses and a little lubricant all are working good. Thanks.
Norman R - 08/08/2019



- T2374600
by:

Fantastic experience from start to finish. Ordering was a breeze and the product arrived before I expected. I recommend etrailer and will use them again.



- T2374600
by:

Master cylinder arrived on time .It's going on a boat trailer .Part is just like original 1989 master cylinder. Thank you etrailer



- T2374600
by:

Long telephone wait time but once I got phone rep he was really helpful and courteous and took care of my return and new order Now just waiting for my credit



- T2374600
by:

worked great and on time



- T2374600
by:

Replacement brake actuator fits with no issue and works like a charm! Now I have trailer brakes again. etrailer was good to work with, shipped on time, no problems. Would use again.


Comments
Perfect, no problems
JeffN - 09/25/2018



- T2374600
by:

Life saver, thanks



- T2374600
by:

Ths is my second order from Etrailer. Top Drawer vendor (price, prompt shipping, packaging, ect) and even better is the customer service. Kathy Hoette went way our of her way to help me with some technical questions and Andi D. made sure it got to me asap by special request....I have previously used Champion, Eastern and Pacific trailer supply for various trailor parts orders (brakes, bearings, seals, Hydraulics, ect) but I will now go to Etrailor 1st as primary vendor...Thanks again..Tim in Hollister Ca.



- T2374600
by:

This master cylinder replaced the one that came on an M&W 300 bushel gravity wagon from the 1980s (no longer in production, and company closed). It was used for the 2014 grain harvest and performed as needed. 1963 Ford F100 4x4 brake hoses are the match needed (these are a few inches longer than the non-4x4). The customer service reps were excellent, as I had made an error in my order and they very quickly corrected it by email and phone and got my order out and to me on time.



- T2374600
by:

The day before our annual vacation our surge brake broke on our boat trailer ... I was not able to find a replacement locally. I found the part on ETRAILER ... their web site was simple to use, their product description gave me all the details needed to make a confident purchase. I paid for over night shipping. My replacement part arrived at 10:00am the next morning. George in shipping stayed in contact with me the entire time, I was impressed. We were able to install the part and two hours later were on our way ....... thank you ETRAILER !!!



- T2374600
by:

Took the Boat out yesterday with the new master and even though the trailer is 40 years old it stopped like brand new. Thanks for all the pic's and video as I wasn't sure this master was the same as the one installed on my 1978 Caulkins trailer. as it turns out the casting numbers were identical. 2 day shipping made sure that we could be on the boat as my son and family came up from Texas and we spent a great day on the water. I was nervous at first but all worked out awesome. Thanks I will recommend, Tom



- T2374600
by:

I ordered a master cylinder for a trailer that I had recently acquired. I had tried finding it everywhere locally no one has even heard of a hydraulic trailer brake system. So I googled hydraulic trailer brakes. etrailer.com came up and I easily found the product I needed on their site. I ordered it on Monday and it arrived on Wednesday. It was super fast delivery and a perfect fit. It works exactly like it is supposed to. I could not be happier. Thanks trailer.com



- T2374600
by:

Wow! Shot in the dark for a 25-year old trailer, brand unknown and you guys scored a bullseye the first try. Great price, excellent delivery and pleasant service staff seals the deal for me. I should also mention that your staff seems not to know what a "hold button" is. Thank you, Thank you.



- T2374600
by:

Ordered late Tuesday, received Friday, installed Saturday and it fit perfectly. Ours is a 25-year old trailer with a peculiar master cylinder that actuates the slave cylinders when a surge of pressure trips the hydraulic system. I could not even supply the make or model of the trailer, just the weight capacity. Thank you for pulling the rabbit out of the hat the first attempt. You have earned my future business.



- T2374600
by:

This is my third time ordering from etrailer. I have been very pleased with their service, quality and pricing. Shipments have been very quick and packaging very professional. A very good company to do business with and they are highly recommended by me!



- T2374600
by:

great service shipped same day fit perfect. if you need trailer parts etrailer is a great choice


26
93
Show More Reviews

Ask the Experts about this Titan Accessories and Parts

  • How to Remove the Master Cylinder Assembly on a Titan Model 20 Brake Actuator
    The master cylinder assembly on the Titan model 20 actuators, like # T1521000 as an example, is bolted to the inside of the actuator. Take a look at the picture I have included as an example. There are 2 bolts on each side holding in the assembly. Remove the bolts, the brake line, and the cap and the assembly should come out.
    view full answer...
    Image 1 for
  • Need Adapter to Connect Titan Model 10 Master Cylinder to Reverse Lockout Solenoid
    The reverse lockout solenoid you recently purchased, part # T4748800, is intended for use in a number of actuators from Titan and Dico, including newer production of the Titan Model 10 Drum Brake Actuator. In these applications the valve, with its 1/8-27 fine pipe threads, should be a direct fit. Please note that it is necessary to remove the orifice connector (part # T1209800) from the back of the Model 10 actuator before installing the reverse lockout solenoid. If your Model 10...
    view full answer...
  • Replacing Master Cylinder in Titan Model 10 Actuator on Boat Trailer
    If the master cylinder you need is the part # T2374600 that would indicate that you have a Model 10 actuator like the part # T4750620. Which normally this bolts to the trailer frame. The picture you submitted doesn't quite show the coupler so I can't really tell what's going on. But you should be able to unbolt the coupler from the trailer to access the master cylinder and replace it. The two lower bolt holes that I pointed out in the picture are what hold the master cylinder to the coupler.
    view full answer...
    Image 1 for Image 2 for
  • Flexible Brake Line Needed for Titan Replacement Master Cylinder Assembly # T2374600
    If you are just looking to replace the brake line from the master cylinder to your steel brake lines, you can use Titan Hydraulic Brake Line with Fittings, # T0980100. If you would like to replace all of the lines from master cylinder to brakes, take a look at Kodiak Hydraulic Brake Line Kit, # 24TA-BLKIT. I have included a snapshot to illustrate what is included in the kit. As you can see in the picture, you will have enough brake line to go 27-1/2 ft back from the master cylinder which...
    view full answer...
    Image 1 for
  • How Does Trailer Brake Line Attach To Master Cylinder Body
    The master cylinder you referenced is for drum brakes and does have a check valve to maintain the correct psi level for the brakes. Disc brakes will require higher psi level and will not have the check valve. The brass connector indicated by the red arrow in the attached photo is the orifice connector and is where your flexible brake line should be connected. The male end of the orifice has 1/8 inch threads and the female end that the brake line attaches to is 3/16 inch threads.
    view full answer...
    Image 1 for
  • Converting Titan Model 6 Drum Brake Actuator for New Disc Brakes
    When replacing the master cylinder on your existing Titan Model 6 Actuator, you will want to use a master cylinder for disc brakes like # T1777405. The master cylinder that is currently on your actuator is designed for the lower pressure drum brakes, so changing to one for disc brakes is highly recommended. This master cylinder assembly is designed for Titan Model 6 brake actuators and will include the master cylinder, mounting plate, hex bolt, push rod assembly and installation hardware.
    view full answer...
  • Parts Needed to Convert Titan Model 6 Drum Brake Actuator # T4079200 to 4-Disc Brake Operation
    It is possible to rebuild a drum brake actuator to handle the higher pressure and fluid displacement required for disc brake assemblies. However, in the case of your four Kodiak disc brakes (part # K1HR35D) for use on a tandem axle trailer these will require more fluid displacement than can be provided even by a modified Model 6 actuator. A drum-to-disc-modified Model 6 actuator could handle the requirements of two brake assemblies but not four, according to my contact at Titan. He...
    view full answer...
  • Can Titan Model 10 Actuator be Converted to Disk Brakes from Drum
    Since you have a Titan Model 10 actuator for drum brakes you can convert them to disc. You can swap out the master cylinder of your Titan model 10 actuator to the part # T4749501042 and you would have a disc brake setup. Now to determine the rest of the parts needed requires a bit more information. We need to find the hubs that will fit the spindles of your trailer. I attached a help article that will walk you through that process.
    view full answer...
  • Replacement Master Cylinder for Titan Model 10 or Model 20 Actuator
    The easiest way would be to know the part number, but if you need a master cylinder replacement you actually don't need to know if your Titan actuator is a Model 10 or Model 20 because the master cylinder replacements we carry can be used for either. If you have a drum brake actuator you would need the Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators # T2374600. If you have a disc brake actuator you would need the Replacement Master Cylinder Assembly...
    view full answer...
  • Replacement Parts for Surge-Type Brake Actuator Trailer Couplers
    Yes, we carry replacement master cylinders and reverse lockout solenoids for surge-type brake actuator trailer couplers like those shown on the linked page. I also linked our main page for all parts, including master cylinders and lockout solenoids. Since trailer/RV makers do not maintain detailed specs on small items like the couplers used in their products, you'll want to check your coupler for any stickers/stampings that indicate its brand, part number and/or capacity. Many couplers...
    view full answer...
  • Titan Hydraulic Brake Actuator Replacement Parts
    We carry a number of parts to rebuild a Titan hydraulic brake actuator. You just want to make sure that you get the correct parts based on if you have drum brakes or disc brakes because they are slightly different due to the fact disc brakes require more pressure. I've linked the page to all of your replacement part options, but let me know if you need further help.
    view full answer...
  • Replacement Rubber Boot for Titan Model 10/20 Master Cylinder
    Unfortunately at this time it does not look like the rubber boot is available as an individual part that can be ordered. I would recommend getting a new Master Cylinder # T2374600 for Drum Brakes or # T4749501042 for Disc Brakes as what has probably happened is brake fluid has gotten through your old master cylinder and caused the boot to deteriorate.
    view full answer...
  • Troubleshooting Titan Model 10 Actuator That Locks Up Drums Brakes
    Is it possible you have a disc brake actuator on a trailer with drum brakes? The disc brake systems require a higher psi so if a disc actuator was used on a drum setup it would lock up the brake quickly. If this were the case you could easily swap the master cylinder to a drum one with part # T2374600 and you'd be set.
    view full answer...
  • Does the Master Cylinder Cap on the Replacement Assembly # T2374600 Allow Rain Water to Enter?
    I confirmed with my contact at Dexter (the manufacturer of Titan products) that the reservoir plugs and the plastic caps on the Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators - Drum # T2374600 will not allow rainwater to enter. However, it is not recommended to completely submerge the replacement assembly under water.
    view full answer...
  • Does Titan Brake Master Cylinder Require Bench Bleeding
    When installing the Replacement Master Cylinder part # T2374600 you really only need to bleed the system once it's installed and at the brake assemblies.
    view full answer...
  • Orifice Connector For Old Style Titan T20
    What you have in the photo is the older 068-351-00 orifice connector with your Titan T20. Those connectors are obsolete and are not even available through Titan (now Dexter) any longer. The only other option is to replace the master cylinder completely in the older T20 using the part # T4749501042 if you have disc brakes or part # T2374600 for drum brakes which come with the a new connector.
    view full answer...
    Image 1 for
  • How To Replace Shocks In Titan Model 10
    I believe that you have a Titan Model 10 actuator based off of the diagram that you are referring to which I have attached below. I contacted Dexter (they now own the Titan products) and the replacement shock part # T1242600 is not attached to the master cylinder part # T2374600 of the model 10 at all. They are attached to the side of the front sliding mechanism with bolts pictured in the diagram as number 31. The shocks (number 29) bolt to the ovals in the side of the sliding mechanism.
    view full answer...
    Image 1 for
  • Availability of Rebuild Kit for Titan Model 10 Actuator
    We do have a large selection of replacement parts available for your Titan Model 10 Actuator. I am not sure exactly what you are needing so I will list out the replacement parts for you to check out. Replacement Master Cylinder Assembly - # T2374600 Replacement Front Roller - # T1601900 Replacement Front Roller Bolt - # T0828800 Replacement Breakaway Chain - # T0776800 Replacement S-Hook - # T1055500 Replacement Gasket - # T0774500 Replacement Orifice Connector - # T1209800 Replacement...
    view full answer...
  • Replacement Master Cylinder Cap For Trailer Surge Brake Reservoir
    The Replacement Master Cylinder Cap # T4830601 does have a fine thread and measures at the 1-5/8" thread diameter. This cap is designed for the Titan Model 10 and 20 master cylinders. You can reference the Replacement Master Cylinder Assembly # T2374600 for a visual reference to see if it resembles what your trailer has.
    view full answer...
  • Replacement Master Cylinder for Titan Model 10 Actuator on 1999 Prestige Trailer
    Thanks for the photos of your trailer's actuator! They were very helpful in answering your questions. Based on the photos, it appears that you have a Titan Model 10 Actuator # T1607500. For a Model 10 actuator, the # T2374400 that you referenced is the correct replacement master cylinder. If you'd also like to replace the master cylinder bracket assemblies, they are included with the master cylinder in part # T2374600. To install the master cylinder, the orifice connector you will need...
    view full answer...
    Image 1 for Image 2 for
  • Will the Replacement Master Cylinder Assembly # T4749501042 Work on a Cronkhite Trailer
    If the master cylinder from your brake actuator on your Cronkhite trailer has the numbers 23744 stamped on the side, then it probably uses a Titan model 10 or model 20 brake actuator. To ensure that you select the correct replacement master cylinder assembly, we will need to know if your trailer has disc brakes or drum brakes. If your trailer has disc brakes, then you will need the replacement master cylinder assembly, # T4749501042, that you referenced. If your trailer has drum brakes,...
    view full answer...
  • Replacement Master Cylinder for a Model 10 or 20 Brake Actuator
    I agree that the master cylinder in your pictures is for a Model 10 or 20 actuator so # T2374400 is the correct replacement. If the springs and hardware are in good shape operate properly then you would not have to replace the whole assembly. If they are not in good shape/operating properly then you will need # T2374600. If it were me this is the route I would take to ensure all the parts are new and in good working order.
    view full answer...
    Image 1 for
  • Replacement Master Cylinder Recommendation for Titan Model 10 Brake Actuator #T1735200
    The Titan Actuator part # T1735200 that you have is a Model 10 actuator so the correct master cylinder you would need is the part # T2374600.
    view full answer...
  • Replacement Parts to Rebuild a Titan Model 10 Drum Actuator Part # T2404600
    We sell replacement parts for the Titan Model 10 Surge Coupler # T2404600 that you referenced, but we do not offer a rebuild kit with all of the parts packaged together. For a replacement master cylinder assembly you would want the Replacement Master Cylinder part # T2374600. If you need to replace the shock you would need the part # T1242600. Other replacement parts we offer for this coupler are the Replacement Master Cylinder Cap with Diaphragm part # T4830601, Replacement Weathe...
    view full answer...
  • Replacement Master Cylinder and Shock for a Titan Model 20 Drum Actuator
    For a replacement master cylinder for the Titan Brake Actuator part # T1055100 you would want the part # T2374600. For a replacement shock you would want the part # T0778400. Replacing those two components of your actuator should get it working like new again.
    view full answer...
  • Common Replacement Parts for Model 10 Brake Actuators
    We carry several replacement parts for the Model 10 actuators, but no we do not carry kits that have them all together. Some of the more common parts we sell would be the part # T2374600 master cylinder for drum brakes or part # T4749501042 for disc. For a replacement shock part # T1242600. For the replacement chain to go along with the # T1054100 you would want the part # T0776800.
    view full answer...
  • Replacement Master Cylinder Assembly for Titan Actuator Coupler for Disc Brakes
    The Titan Actuator you referenced, part # T4750620, is their model 10 actuator which uses replacement master cylinder # T2374600. Their model 60 actuator uses replacement master cylinder assembly # T4820000.
    view full answer...
  • Will Titan Master Cylinder Assembly Fit Dico Hydraulic Brake Actuator
    If your Dico Actuator is a model 10 or 20 and is designed for disc brakes then part # T4749501042 will work well for you. If you have drum brakes, and have model 10 or 20, then the replacement master cylinder you need is part # T2374600.
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.