Titan Brake Line Tee with Mounting Bracket

Ask the Experts about this Titan Accessories and Parts

• Does Titan Brake Line Tee Secure Trailer Brake Lines
  Indirectly yes, the part # T0778500 does get used with brake hoses. If you check out the attached picture you'll see that holds a union tee that hoses run to. We do have clamps that were designed to secure brake lines like with the part # A0500 for 1/2 inch and # A0250 for 1/4 inch. We also have clips, # T0936600, for more brake line support.
  view full answer...
• How Many Brake Line Tees are Needed to Install Tandem Brake Line Kit
  There should be two tees in the brake line kit for a tandem axle brake kit. Check out the picture I attached that shows a typical setup for them. If you need additional tees you'll want the part # T0778500 if you are missing some.
  view full answer...
• Thread Size and Pitch for Titan Brake Line Tee with Mounting Bracket # T0778500
  I spoke with my contact at Titan and he informed me that this Titan Brake Line Tee, part # T0778500, has an inverted flare seat at the base of the fitting, and it is designed for use with a flared brake line or hose. He also informed me that the thread size and pitch is 3/8 inch x 24 national fine thread, and you would need a male fitting of that size to match the orifices. The Titan Hydraulic Brake Line with Fittings, part # T0980100, has these same thread dimensions.
  view full answer...
• Hose that is Compatible with Engine Oil for Air Conditioning System on a 1958 Plymouth Savoy
  It depends on the hose. The part that you came from, # T0778500, is a fitting. Hose for high temperature engine applications such as # D15799 would work with engine oil just fine. This is 25 feet worth of hose. It is available in different lengths: 8 feet # D15740 5 feet # D15701 All of these lengths have a 1/2 inch inner diameter.
  view full answer...
• Brake Line Kit that Could be Used with Military Trailer M101-A2
  We have tandem brake line kits that should work well on your utility trailer like the part # HS496-252 which has a 25 foot main line or part # 20TA-BLKIT which is all flexible lines and a 20 foot feed line.
  view full answer...
• Electric Over Hydraulic Actuator and Parts to Add Disc Brakes to Third Trailer Axle
  Sounds like you have a surge brake coupler on your trailer currently and are looking for a way to convert it to an electric over hydraulic setup and then also add brakes to your third axle. The electric over hydraulic actuator I like the best is the Cargo Towing Solutions HydraStar Electric-Hydraulic Actuator for Disc Brakes # HBA16. This actuator has proven to be very reliable and rarely has problems. The Kodiak 225 caliper that you have on your other axles is a very common caliper...
  view full answer...
• Is There a Mounting Bracket for the Kodiak Tee Fitting Part # BH-T-3FIF
  If you are concerned with how to mount the Kodiak Tee Fitting part # BH-T-3FIF then I recommend using the Titan Tee Fitting part # T0778500. This fitting comes with a mounting bracket so you do not have to worry about the tee bouncing around. They both have female 3/8"-24 threads so you will be able to use one in place of the other.
  view full answer...
• Parts Needed to Add a Third Brake Axle to a Trailer
  To tee into your current brake setup you would need the part # T0778500. This would need to get added to the main brake feed line of your trailer. From there you would want to use a single axle trailer brake line kit like the part # DM5402. Basically everything from this kit would get used minus the long brake line. Basically the tee that you add in will go to the new brake assemblies and then using a flex line like part # BH-3MFS-1 back to the original axle lines. For stainless rotors...
  view full answer...
• Trailer Hydraulic Brake Line Tee Fittings
  So on the replacement bleed port # KBPBB with a 1/4 inch -28 screw and 1/8 inch adapter. But I am not sure how you would use it as a tee. Adapter port # K22590A has 1/8" NPT and 3/16" FIF threads and might be a better option depending on the brake line size. For an actual tee fitting we have # BH-T-3FIF which has 3/16 inch inverted female flares with 3/8"-24 threads. We also have a brake line tee with a mounting bracket, # T0778500. It also has 3/8"-24 threads. If none of these...
  view full answer...
• 30 Foot Trailer Tandem Axle Brake Line Kit Recommendation
  For a 30 foot brake line kit you would need the part # HS496-251 for the first axle and then to tee into this kit for the second axle you would need part # T0778500 and then use the single axle kit part # DM5402 for the second axle lines. Everything of this kit would be used minus the main feed line, but you would need the part # # BH-3MFS-1 to go from the first axle to the second.
  view full answer...
• Parts Needed for Brake Line Fittings on Boat Trailer
  What exact fittings are you needing? We have the Tees with Brackets # T0778500, Hose Brackets # T0776300, and Hose Clips # T0776400 that all come with the Titan Hydraulic Brake Lines and Fittings for Tandem-Axle, Torsion-Axle Trailers # T4830000 as basic pieces to choose from. If you can let me know what tees you're needing I can see if we have what you're needing! I've also attached a link to our parts selection for trailer brakes that you can filter through.
  view full answer...
• Parts Needed to Add Disc Brakes to Third Axle to Use Titan Disc Brake Kit with Triple Axle Trailer
  You can add the parts needed to make Titan disc brake kit # T4843800 compatible with a 3-axle trailer. If you do I recommend placing the actuator as close to the axles as you can. You may also need to use larger diameter brake line especially if you have to leave the actuator closer to the front of the trailer. As for the parts you would need: 1 disc brake kit # K2HR35D 2 of bearing # L68149 2 of bearing # L44649 1 of seal set # RG06-050 2 of flexible hose # T0776500 2 of tee...
  view full answer...