Titan Hydraulic Brake Line with Fittings - 13" Long
(29 reviews)
Price: $34.19
In Stock
Titan Hydraulic Brake Line with Fittings - 13" Long
Item # T0777300
Retail:$39.04
Our Price: $34.19
You Save: 12%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (29)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Titan Accessories and Parts - T0777300
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- Brake Lines
- Brake Line Components
- Titan
- 13 Inch Long
- Flexible Brake Hose
Perfect for use with foldaway trailer tongues, this flexible hose functions as part of a hydraulic brake actuator system. Connect line to your actuator's master cylinder to route brake fluid to your trailer's brakes. Fittings included.
Features:
- 13" Long hose connects hydraulic brake actuator to trailer brakes when used with additional lines and fittings (not included)
- Flexible design makes hose perfect for use with foldaway trailer tongues
- Brake line is furnished with 3/8"-24 UNF male and female fittings on ends
071-A52-00 Titan 13" Long Tubing
Replaces 0777300
Video of Titan Hydraulic Brake Line with Fittings - 13" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Titan Trailer Brakes T0777300 Review
Today we're going to take a look at the Titan 13" long hydraulic brake line with fittings. Now, this is a 13" long hose, which will connect your hydraulic brake actuator to your trailer brakes when it's used with additional lines and fittings. Now those additional lines and fittings are not included. You would have to purchase those separately. We do sell them separately on our website, and they are listed on this product page as a related product. This hose is a flexible design, which makes it perfect for use with fold-away trailer tongues. The brake line is furnished with 3/8" x 24 UNF male and female fittings on the ends.
Now the male fitting right here is what will thread into your brake actuator. The female fitting here is what will attach to the first steel brake line in your brake system. But I am going to put a measurement on it just to show you from end to very end is right at 13" long. But that should do it for the review on the Titan 13" long hydraulic brake line with fittings.
Customer Reviews
Titan Hydraulic Brake Line with Fittings - 13" Long - T0777300
Average Customer Rating: 4.7 out of 5 stars (29 Customer Reviews)
Perfect for use with foldaway trailer tongues, this flexible hose functions as part of a hydraulic brake actuator system. Connect line to your actuator's master cylinder to route brake fluid to your trailer's brakes. Fittings included.by: Dustin06/25/2022
Had damage to my brake line from my swing away hitch on the boat trailer. This replacement was just what I needed and it’s held up fine.
by: Bill 12/07/2020
They fit perfectly and work great!
Comments
Still working with no problems.
Bill - 12/08/2021by: Hal C09/07/2017
exactly the part I needed, ordered from etrailer's excellent website. I tried to source these from the local auto parts store (they may have had them in stock somewhere) but they fumbled around for 15 minutes trying to figure out what car might have this part on it. Let's see, is it a 65 Chevy truck.....no, maybe a Ford....no. If it isn't a specific model of car, the parts store people can't find the part using their computer systems.
Comments
Exactly the right length I needed, unavailable at local parts store. Thats why I come to etrailer.
Hal C - 09/07/2018by: Robert09/11/2018
The parts arrived as expected. Installation was easy for the most part, once the hard brake lines were changed to fit. Knowing that these additional parts and many other additional parts, such as a reverse lockout solenoid, vehicle and trailer electrical connectors and wires, would be necessary for converting surge brake drum brakes to disc brakes would have been helpful as a "complete" conversion kit. Noah was very helpful in helping me to order the correct parts for this conversion.
by: Richard02/23/2019
The product was fine and as ordered. Price was reasonable. Only problem was in delivery as it sat in a postal facility for 5 days according to my tracking. While this is not etrailers fault it is something they need to address with the postal service.
by: Steve M12/19/2016
Good value. I bought the cheapest shipping, took about a week. The week before I bought a surge brake coupler and wheel cylinders. These came UPS ground. They were delivered 20 hours after I ordered them. Very good service.
by: Rod S.05/09/2014
I have ordered an automobile hitch, and now expanded ordering to include brake parts. In each case e-trailer has been very helpful to overcome questions.
Excellent service, helpful people.
by: Craig L07/06/2016
Received my order promptly and the part worked fine.Very happy with E-trailer.
Comments
Works fine ,very satisfied
Craig L - 07/19/2017by: Chuck H.08/14/2017
Great people to talk to and very helpful. This product didn't fit my application And I had to send it back. No problem. I'll certainly use etrailer for my future trailer needs. Fast shipping great customer support.
by: Buddy01/16/2018
I received the master cylinder found the orifice connector won't fit, had to order T1209800 to fit.
by: Peter09/26/2020
Perfect size and were the exact replacement for my trailer.
by: JHH11/10/2015
As usual, the folks at etrailer helped me pick the right item and shipped it right away. Happy with purchase.
by: Doug S08/07/2012
Used these hoses to attach steel brake lines to disc brake caliper on a torsion axle. Worked fine.
by: Mitch S.10/12/2016
The products I ordered were of the quality expected. Quick turnaround on my order.
by: Shane 10/16/2019
Brake lines showed up quickly and fit p erfect.
by: Thomas H01/05/2019
Quality parts. Quick delivery
by: Scott01/17/2015
Even though it was too short and I could not use it the line is well made for the price. I wish I could return it.
by: Robert 08/09/2022
by: Bob04/07/2015
Item was exactly as described and arrived quickly, would use them again.
by: Jayson 08/16/2021
by: Ryan07/14/2015
parts worked fine
by: Ron07/12/2013
Bolted right up!
by: Shawn R08/24/2016
Great service!!!
by: BB08/04/2015
as described
by: Randy 07/26/2021
25
29
Show More Reviews
See what our Experts say about this Titan Accessories and Parts
- Will the Flexible Brake Hose # T0777300 Fit on 3/16 Inch ThreadsThe Titan Hydraulic Brake Line with Fittings, # T0777300, is equipped with 3/8 inch -24 UNF fittings that fit on 3-1/16 inch threaded fittings so it should work for you.
view full answer... - Will the Titan Hydraulic Brake Line with Fittings # T0777300 fit 3/16 inch Brake LinesYes, the Titan Hydraulic Brake Line with Fittings # T0777300 will work with your 3/16 inch brake lines. The fittings are standardized so you will not need an adapter or anything; it will already fit the flare fittings that you currently have. Keep in mind that this has one male end and one female end so you will want to make sure that it is compatible for your purpose. Brake lines do not have a psi rating which is why you cannot find one.
view full answer... - What are the Fittings on the T0777300 Brake LineThe flared connections on the Titan Hydraulic Brake Line # T0777300 are 3/8"-24 UNF male and female fittings.
view full answer... - How to Shorten Hydraulic Disc Brake LinesThank you for your purchase from etrailer! The flexible brake lines you selected, Titan # T0777300 and # T0776500, are not designed for cutting. These are offered in the various lengths to allow you to avoid that need and these flex lines are also intended for use near the brake assemblies where their flexibility allows them to handle the motion of the trailer suspension. If you purchased elsewhere a brake kit with rigid steel lines you will need a flaring tool (which we do not offer)...
view full answer... - Brake Lines for Titan Coupler with Brake Line Connection Within Trailer TongueThe Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs # T63FR does require the brake line inside the trailer tongue prior to the actuator. This simply requires a hole be drilled to allow the entry/exit of the brake line. I recommend the Titan Hydraulic Brake Line with Fittings - 13" Long # T0777300 for a simple solution. Unfortunately I don't have a video of that installation for you.
view full answer... - Titan BrakeRite Hydraulic Brake Line for Converting Hydraulic Surge BrakesYou will need the Titan Hydraulic Brake Line # T0777300 to connect your brake lines to the Titan BrakeRite # T4813102. We do offer the Bright Way Trailer Breakaway Kit # 3802345 that will give you a battery, box and charger. No breakaway switch is included in this kit.
view full answer... - Can a Fold-Away Trailer Tongue Hinge Kit Work with Hydraulic Surge BrakesYou can use a fold-away hinge kit with a surge coupler but you will need to replace the hard brake line with a flexible hose like # T0777300 that you have referenced. For fold-away drum brake applications use # T4839000. For a 3 x 4 inch tongue use 2 adapters # T4842100.
view full answer... - Extending Brake Line from Back of Master Cylinder to Use Electric Lockout SolenoidYou should just need flexible brake line # T0777100 which has 3/8 inch UNF female fittings on both ends. The Solenoid will install directly to the back of the master cylinder, then this short hose which will then connect to the hose already on the trailer. If you need one with a female fitting on one end and a male on the other use # T0777300.
view full answer... - Can the Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 Fit a 16 ft 12K LoadRite Boat TrailerThe Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 will work perfectly for your LoadRite 16 foot boat trailer as long as the tongue measures 2 x 3 inches and the trailer tongue thickness is between 1.88 and .120 inches. It has a weight capacity of 5,000 lbs so it will be more than strong enough for your boat weight capacity of 1,200 lbs (keep in mind that this will not raise your boat trailer capacity). According to the table that is included with the instructions for a 2 x 3 inch and...
view full answer... - Recommended Trailer Tongue Hinge Kit for 3x5 Inch Frame on Shorelander Boat Trailer w/ Surge CouplerFor a 3x5 trailer tongue, I'd recommend the Fulton # FHDPB350101 coupler hinge kit. Keep in mind that this hinge isn't for use with aluminum trailer frames. You'll also need to install a piece of flex brake line like the # T0777300 that you referenced. I've linked you to a video that contains more information about the hinge.
view full answer... - Hinge Kit Recommendation for a Shorelandr Trailer with Surge BrakesFor a 3x5 trailer tongue, I'd recommend the Fulton # FHDPB350101 coupler hinge kit. Keep in mind that this hinge isn't for use with aluminum trailer frames. You'll also need to install a piece of flex brake line like the # T0777300 that you referenced. I've linked you to a video that contains more information about the hinge.
view full answer... - Troubleshooting Sticking Trailer Surge BrakesAs long as your Titan model 60 surge brake actuator is rated for disc brakes and is in good working order it should have not problem activating 4 sets of brake assemblies. If your brakes are sticking all of a sudden after having an additional set of brakes installed I would take the trailer back to the shop that did the work and have them go over their installation to see what they possibly messed up. Normally sticking surge brakes are the result of worn out actuator components, so it...
view full answer... - How to Modify Brake Lines for Folding Tongue Boat TrailerYou could the 25 inch long hydraulic brake line with fittings, part # T0980100. You would just need to connect the line to your actuator master cylinder to route brake fluid to your trailer brakes. The fittings are included. We offer the flexible line in a few different lengths as well. For example # T0777300 is 13 inches long.
view full answer... - Parts Needed to Repair Brake Line Connection on Titan Model 60 Hydraulic Trailer CouplerIt looks like that is a piece of flexible brake line you are using. You would need standard flexible brake line with a 3/8 inch male fitting. We offer them in varying lengths. A 13 inch long brake line with fittings (male on one end, female on the other) is available as part # T0777300, 18-25/32 inch length as part # T0776500 or a 25 inch long line is available as part # T0980100. If you do not already have one installed, I would recommend a solenoid shield, part # T4835800183 to protect...
view full answer...
- Parts Needed to Install Titan Disc Brake Kit and Swing-Away Actuator # T4843300The Titan Disc Brake Kit you referenced, part # T4843300 includes the flex line to make the transition between the actuator and swinging portion of the trailer tongue and the stationary portion. The brake line would then transition to hard line until the axle is reached, where the second piece of flex line would make the transition to the hard line that runs along the axle. At this point, you will need two flex lines, part # T0777300, brackets, part # T0776300 and retaining clips, part...
view full answer... - Will a Fold Away Coupler Work on a 2002 Blazer Bass Boat Trailer with Hydraulic Surge BrakesYes, the Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, will work on a trailer with surge breaks. You will need to determine the length of the coupler that will be in front of the fold away to select the appropriate length of flexible hydraulic brake line to allow the foldaway to fold without damaging the brake line. We have several lengths of flexible brake line available for this. Titan Hydraulic Brake Line with Fittings - 12-27/32 inches Long,...
view full answer... - Is a Flexible Hose Needed to Connect Titan Reverse Lockout Solenoid Valve # T4748800You will need to add a flexible brake line hose only if your trailer coupler uses a hinge at the rear of the coupler (if it is a foldaway type). If so, we offer flexible brake line hoses in three lengths, each with male and female 3/8-inch-24 UNF fittings. The 13-inch hose is part # T0777300; the 18-inch hose is part # 18018-SF; and the 25-inch hose is part # T0980100.
view full answer... - Selecting a Brake Line Kit for Boat Trailer Being Converted to Disc BrakesYou are correct to place your disc brakes on the rear axle of your boat trailer since this is where most of the weight will be carried (nearer to the boat's motor). Disc brake and torsion axle applications both require flexible brake lines so yes you can use the kit you referenced, part # DM5424. This kit includes 18-7/8-inch long flexible lines, but if your measurement shows you need longer flex lines we offer various sizes of lines; part # T0777300 is 13-inches; part # T0776500 is 18-25/32-inches...
view full answer... - Will Titan Disc Brake Kit and Aero 7500 Actuator Fit A 3 Foot Swing Away TongueYou will just need to order a few extra parts to be able to use the Titan Disc Brake Kit and Aero 7500 Actuator w/ Manual Lockout on your swing away tongue that is 3 feet long. You will need to order the Titan Hydraulic Brake Line with Fittings - 12-27/32 Inches Long, part # T0777300, the Titan Hydraulic Brake Line with Fittings - 30 Inches Long, part # T1061900, and the Titan 3/16 Inch Hydraulic Union, part # T1287900. The 30 inch long brake line # T1061900 will attach to the actuator,...
view full answer... - Replacing Swing-Away Brake Actuator on 2010 Mastercraft Boat TrailerAs long as your 2010 Mastercraft Boat Trailer is equipped with a 3 inch x 5 inch tongue and weighs less than 7,500 pounds when loaded the Titan Swing-Away Actuator # T4839100 that you were looking at will work great as a replacement. This particular unit maintains the swinging function you had before for easier storage and the electric reverse lockout lets you reverse the trailer without the brakes engaging. If you happen to have a 3 inch x 3 inch or 3 inch x 4 inch tongue you can actually...
view full answer... - Replacement Adjuster Plugs and Brake Line for Brake Actuator on Trailer with Surge BrakesAs long as the brake line you need uses 3/8 inch 24 UNF male and female fittings you can use # T0777300 if a 13 inch line is long enough. If not we have # T0776500 that 18-25/32 inches long which is more than enough. The adjuster plugs we carry are # 46-7 for one or # BP10-220 for a pack of four.
view full answer... - Will Kodiak Disk Brake Caliper on Kit # K2HR35DS Accept 3/8 Inch FittingI spoke with my contact at Kodiak and he said the 3/8"-24 UNF male fitting on Titan brake line, part # T0777300, will not fit the Kodiak caliper thread on Kodiak Disc Brake Kit # K2HR35DS. Your fitting will need to be 3/16". I have linked you to a page showing all of our brake lines for you to check out.
view full answer... - Plumbling Hydraulic Brake Lines for Tri Axle Boat TrailerAlthough I don't have a diagram for a tri-axle trailer, I do have one for a tandem. If you refer to the photo, you would plumb the brake lines as shown, but would add the additional lines and tees for an extra axle. Here's the part numbers of the items shown in the photo. (A) 12-27/32" Long flexible hose ( # T0777300) (B) 18-25/32" Long flexible hoses ( # T0776500) (C)19' Long steel line ( # T4336000) (D) 66" Long steel lines ( # T1086600) (E) 30" Long steel line (...
view full answer...
- Parts Needed to Convert Titan Model 6 Drum Brake Actuator # T4079200 to 4-Disc Brake OperationIt is possible to rebuild a drum brake actuator to handle the higher pressure and fluid displacement required for disc brake assemblies. However, in the case of your four Kodiak disc brakes (part # K1HR35D) for use on a tandem axle trailer these will require more fluid displacement than can be provided even by a modified Model 6 actuator. A drum-to-disc-modified Model 6 actuator could handle the requirements of two brake assemblies but not four, according to my contact at Titan. He advised...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Installed by:
Jeff D
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.