Titan Hydraulic Brake Line with Fittings - 18-25/32" Long

Ask the Experts about this Titan Accessories and Parts

• Flexible Brake Hose for Trailer with Folding Tongue and Hydraulic Brakes
  Flexible brake line # T0776500 is designed with 3/8"-24 UNF male and female fittings on the ends so provided that is what your existing line uses then this hose will work for you. Otherwise you would either need a line that matches what you have now or you would need adapter fittings to use hose # T0776500. But this hose is a very common size so it will likely work without the need of adapter fittings.
  view full answer...
• 18 Inch Long Flexible Brake Hose for Trailer with Hydraulic Drum Brakes
  Flexible brake line # T0776500 is a good option. It is 18-25/32 inches long and uses 3/8"-24 UNF male and female fittings on each end.
  view full answer...
• How to Shorten Hydraulic Disc Brake Lines
  Thank you for your purchase from etrailer! The flexible brake lines you selected, Titan # T0777300 and # T0776500, are not designed for cutting. These are offered in the various lengths to allow you to avoid that need and these flex lines are also intended for use near the brake assemblies where their flexibility allows them to handle the motion of the trailer suspension. If you purchased elsewhere a brake kit with rigid steel lines you will need a flaring tool (which we do not offer)...
  view full answer...
• Recommended Flexible Hydraulic Brake Line For Titan Disc Brake Kit For Single Axle Trailer
  The T4890700 hydraulic line has been discontinued but we do have a solution for you. You can use part # T0776500. This is a hydraulic brake line with fittings but is about an inch longer than the T4890700 . The # T0776500 line will work well for your system.
  view full answer...
• Flexible Brake Hose with Swivel Fittings on the Ends
  The ends of brake hose # T0776500 are fixed and do not swivel. Normally on the components you are threading this onto one of them would have a swivel so you would thread the hose onto the fixed component first and then attach the end that threads onto the swivel. We also have hose # 18018-SF with a 90 degree bend on one end and the thread piece separate. Kodiak hose # BH-3MFS-1-5 has swivel fittings on both ends and it is 18 inches long so it may be the best option for you.
  view full answer...
• Flexible Brake Line Recommendation with 90 Degree Fitting Availability
  Sounds like you are looking for the part # bh-3mfs90-1-5. This is an 18 inch long flexible brake line with a 90 degree fitting on the end.
  view full answer...
• Hard Brake Line is Too Long to Install a Titan Brake Actuator with Electric Lockout
  Since the hard line that you have is too long you need to either cut it to length or just shorten it and install the Titan Hydraulic Brake Line # T0776500. You will need to flare the hard line though so that it fits the actuator. If you would rather just replace the brake line on your trailer with flexible hose then you can use the Kodiak Kit # 18SI-BLKIT for a single axle trailer or part # 20TA-BLKIT for a tandem application. I have linked our selection of flexible hose kits for you...
  view full answer...
• Using Surge Brake Actuator on Trailer with Fold-Away Coupler Hinge
  If your trailer is equipped with a fold-away coupler hinge like # FHDPB330301 then you can still use a surge brake actuator like the excellent Zinc-Plated # 099-175-20. The only thing you will want to add is a flexible brake line across the hinge like the Titan # T0776500 to accommodate this function. Please note that the Kodiak Disc Brake Kit # K2HR35D referenced in your question includes rotor-and-hub assemblies, calipers, mounting brackets, and mounting bolts but it does not include...
  view full answer...
• Flexible Hydraulic Brake Line Hose for Trailer Brakes
  We have brake line # T0776500 that is fitted with 3/8"-24 thread UNF male and female fittings on the ends. This is pretty much the standard size for brake lines used on trailers; 3/8-24 with 3/16 fittings. An auto parts store is sure to have any adapter fittings. I have also included a link to all of the flexible brake lines we currently offer.
  view full answer...
• Replacement Master Cylinder for Atwood Actuating Coupler for Drum Brakes
  For your Atwood Brake Actuator w/ Manual Lockout - Drum Brakes - Black - 2" Ball - Bolt On - 6,000 lbs # AT82543, the master cylinder you need is the Replacement Master Cylinder for Atwood Trailer Brake Actuators - Drum 85841 (which has been discontinued). So you will want to check to see if it is the actual cylinder or just the gasket that needs replaced. Let me know as I'm happy to assist.
  view full answer...
• Recommended Parts Needed To Rebuild Tri-Axle Trailer With EOH Brakes
  We have many of the components that will work for you but we do not carry axles that would be big enough to handle the heavy load you said your boat and trailer weigh. I recommend finding a dealer locally to get the right axle for your trailer and boat. When they build the axles for you they should also install brake mounting flanges and spindles to match the other items recommended below. Since you mentioned 8,000 lb axles, I will use that figure for my recommendations for the other...
  view full answer...
• Electric Over Hydraulic Actuator and Parts to Add Disc Brakes to Third Trailer Axle
  Sounds like you have a surge brake coupler on your trailer currently and are looking for a way to convert it to an electric over hydraulic setup and then also add brakes to your third axle. The electric over hydraulic actuator I like the best is the Cargo Towing Solutions HydraStar Electric-Hydraulic Actuator for Disc Brakes # HBA16. This actuator has proven to be very reliable and rarely has problems. The Kodiak 225 caliper that you have on your other axles is a very common caliper...
  view full answer...
• Replacement Surge Brake Parts for 2004 5 Starr Boat Trailer
  It sounds like you have a Demco Actuator to me like # DM8104002. We also have one with a 4 inch drop # DM8104311. Both are Hydraulic Brake Actuators that are rated at 12,500lbs.,has a 2-5/16 inch ball, and bear the DA10 model number. I was able to look up your boat trailer and the parts used between packages varied. I can help you pick out Rotors, Lines, Calipers, and Pads if you can provide me with more information about the current items on the trailer. I will need the number of...
  view full answer...
• Selecting a Brake Line Kit for Boat Trailer Being Converted to Disc Brakes
  You are correct to place your disc brakes on the rear axle of your boat trailer since this is where most of the weight will be carried (nearer to the boat's motor). Disc brake and torsion axle applications both require flexible brake lines so yes you can use the kit you referenced, part # DM5424. This kit includes 18-7/8-inch long flexible lines, but if your measurement shows you need longer flex lines we offer various sizes of lines; part # T0777300 is 13-inches; part # T0776500 is...
  view full answer...
• Is a New Electric Over Hydraulic Actuator Required When Converting from Drum to Disc Brakes
  Yes you will need a new electric over hydraulic actuator to go from drum to disc as the disc brake setups require a higher psi rating. The best option is the HydraStar part # HBA16 as it has the best reputation for reliability and is the fastest reacting as well so it's what we recommend the highest. Since you are going to disc brakes you'll need a flexible line to go from the caliper to the axle since the caliper moves. For that you'd want the part # # T0776500 .
  view full answer...
• Disc Brake Kit Recommendation for Boat Trailer With 3,500-lb Axles
  If you have the same boat trailer as you did in your previous question, which has 3,500 lb axles and 13 inch wheels, then the only kit that we offer for your trailer is the Titan Disc Brake Kit # T4843300. The thing about this kit is that it comes with a coupler, which you already have, and the hub/rotors that you were not wanting. This kit includes the combination of a few different kits. Since you already have an actuator, the kits that you would need are the Disc Brake Assembly (2...
  view full answer...
• Can Trailer Fold Away Hinge Kits be Used with Surge Brake Actuators
  You can use a Fulton Hinge kit like the part # FHDPB330301 that you referenced as long as you have a flexible brake line across the hinge like the part # T0776500.
  view full answer...
• Plumbling Hydraulic Brake Lines for Tri Axle Boat Trailer
  Although I don't have a diagram for a tri-axle trailer, I do have one for a tandem. If you refer to the photo, you would plumb the brake lines as shown, but would add the additional lines and tees for an extra axle. Here's the part numbers of the items shown in the photo. (A) 12-27/32" Long flexible hose ( # T0777300) (B) 18-25/32" Long flexible hoses ( # T0776500) (C)19' Long steel line ( # T4336000) (D) 66" Long steel lines ( # T1086600) (E) 30" Long steel line...
  view full answer...
• Flexible Brake Line or Brake Line Kit with Hose Longer than 14-1/4 Inches
  We have several different lengths of brake lines. I have included a link to them for you. You do want a line long enough to account for the movement of the trailer suspension. Part # T0776500 is 18-25/32 inches long. Some we have are shorter and some longer. We have a kit that has numerous parts, # T4830000. It comes with 4 lengths of the 18-25/32 inch brake line. The kit like you have referenced is for 1 wheel.
  view full answer...
• Disc Brakes for 2004 EZ Loader 3500 Pounds Trailer
  A disc brake kit that will fit your trailer is the Kodiak Disc Brake Kit # K2HR35D. You will need two Bearing Kits # BK2-100 which includes both the inner and outer bearings as well as the seal. I have included the installation video for you as well. For a brake actuator, the Dexter Brake Actuator for Disc Brakes # 099-175-20 is a great fit. Disc brakes need a different actuator than drums because they require more pressure through the brake lines. Also, if you have a steel brake...
  view full answer...
• Parts Needed to Repair Brake Line Connection on Titan Model 60 Hydraulic Trailer Coupler
  It looks like that is a piece of flexible brake line you are using. You would need standard flexible brake line with a 3/8 inch male fitting. We offer them in varying lengths. A 13 inch long brake line with fittings (male on one end, female on the other) is available as part # T0777300, 18-25/32 inch length as part # T0776500 or a 25 inch long line is available as part # T0980100. If you do not already have one installed, I would recommend a solenoid shield, part # T4835800183 to...
  view full answer...
• Replacement Adjuster Plugs and Brake Line for Brake Actuator on Trailer with Surge Brakes
  As long as the brake line you need uses 3/8 inch 24 UNF male and female fittings you can use # T0777300 if a 13 inch line is long enough. If not we have # T0776500 that 18-25/32 inches long which is more than enough. The adjuster plugs we carry are # 46-7 for one or # BP10-220 for a pack of four.
  view full answer...
• Adding Surge Actuator to Trailer with Swing Away Hinge and Hydraulic Brakes
  I would assume the trailer uses drum brakes so what you could do is install the Demco Hydraulic Surge Actuator part # DM8608601 for a surge setup that would attach to the brake line you have now. Since it's a swing away you will need to use a flexible line to connect before the hinge and after like with the part # T0776500.
  view full answer...
• Can a Coupler Hinge be Used on a Boat Trailer with Hydraulic Surge Brakes
  The Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 can be used on a trailer with a surge brake actuator. You will need a flexible brake line like # T0776500 if you don't already have one.
  view full answer...
• Availability of 1-Foot Brake Line with 3/8-Inch UNF Fittings
  We offer the Titan Hydraulic Brake Line # T0777300, which is 13-inches long. We also offer # T0776500 which is about 18-inches long overall. These flexible hoses have one male and one female 3/8-inch UNF connector fitting.
  view full answer...
• Parts Needed to Add Disc Brakes to Third Axle to Use Titan Disc Brake Kit with Triple Axle Trailer
  You can add the parts needed to make Titan disc brake kit # T4843800 compatible with a 3-axle trailer. If you do I recommend placing the actuator as close to the axles as you can. You may also need to use larger diameter brake line especially if you have to leave the actuator closer to the front of the trailer. As for the parts you would need: 1 disc brake kit # K2HR35D 2 of bearing # L68149 2 of bearing # L44649 1 of seal set # RG06-050 2 of flexible hose # T0776500 2 of tee...
  view full answer...
• Will a Fold Away Coupler Work on a 2002 Blazer Bass Boat Trailer with Hydraulic Surge Brakes
  Yes, the Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, will work on a trailer with surge breaks. You will need to determine the length of the coupler that will be in front of the fold away to select the appropriate length of flexible hydraulic brake line to allow the foldaway to fold without damaging the brake line. We have several lengths of flexible brake line available for this. Titan Hydraulic Brake Line with Fittings - 12-27/32 inches...
  view full answer...