See what our Experts say about this Thule Accessories and Parts

• Adapting Old Yakima and Thule Roof Bike Racks for Aero Factory Crossbars
  It depends on your bike mount and brand. Yakima has their Universal Mighty Mounts # Y03590 that should help with most of your Yakima carriers. Thule has their Xadapt series: # Xadapt1 and # Xadapt2 for crossbars that have a t-track in them. If not, they have this old Ride-On Adapter that is now only available in its individual parts: 4 of the # 915-0625-54 4 of the # 853-2154 4 of the # 853-2156 4 of the # 853-5267 4 of the # 753-2854 4 of the # 936060054 4 of the # 853-5269 8 of the...
  view full answer...
• Solar Panel Charging System Compatibility On a Tear Drop Trailer With Thule Square Bar Roof Rack
  I recommend using the Go Power Solar Flex Eclipse Charging System w/ MPPT Solar Controller # GP67MR on your tear trailer. This solar panel is flexible and will follow the curve of your roof line. This particular kit has a 190watt panel. Each panel is 56" long x 27" wide x 1/8" deep allowing you to not have to mounts a rigid panel to your rack. If you go with a ridged panel setup like the Go Power Overlander Solar Charging System # 34282181 you will need 4 of the Replacement Square-Bar...
  view full answer...
• Replacement Mounting Hardware For Ski Carrier On 2015 Subaru WRX
  The ski rack you have sure looks like the Thule ski racks we offer. The replacement adapter we offer is the # 853-2156 that attaches to the crossbars. You may need a couple of the other parts to complete the installation. You may need the washer, part # 853-2154, and the carriage bolt, part # 915-0625-54, as well as the nut to hold it in place, part # 936060054.
  view full answer...
  
• Size of Bolt of Replacement U-Bolt 853-3105 of Thule Hitch Mounted Bike Rack Ski Carrier Adapter
  Correct, the Replacement U-Bolt for Thule Hitch Mounted Bike Rack Ski Carrier Adapter # 853-3105 size is M6. If you need other spare parts for the Thule Hitch Mounted Bike Rack Ski Carrier Adapter, the following are available: - Replacement Hex Nut for Thule Ride-On Adapter or Hitch Mounted Bike Rack Ski Carrier Adapter # 936060054 - Replacement 3-Wing Hand Knob for Thule Bike, Board and Ski Carriers # 753-0745 - Replacement Spacer for Thule Hitch Mounted Bike Rack Ski Carrier Adapter...
  view full answer...
• Replacement Parts for Thule Luggage Basket 581
  There are some general spare parts available for the Thule Luggage Basket 581 which may be helpful for you. What is available is the Thule Replacement M5 Hex Key # 853-0930, Replacement Bolt M6 x 12 mm Allen bolt # 919-0612-54, Replacement Hex Nut for Thule # 936060054 Replacement M6 x 25 mm Allen Bolt for Thule # 919-0625-54 and Replacement 3-Wing, High Hand Knob with M8 Bolt for Thule # 753-0776-09. This product was discontinued nearly 16 years ago, so the selection of replacement parts...
  view full answer...
• Will the Hex Nut # 936060054 Fit with the M6 x 25mm Carriage Bolt # 915-0625-54
  Yes, the Hex Nut # 936060054 that you referenced will fit the M6 x 25mm Carriage Bolt # 915-0625-54. I spoke with my contact at Thule who said that they are metal (non-stainless steel) with a black powder coat glossy finish. My contact also said that he owns some Thule products that use this same nut and he has never seen any of them rust if that is what you are concerned about.
  view full answer...
• Replacement Hardware for the Thule Hitch Mounted Bike Rack Ski Carrier Adapter
  We do carry some of the replacement hardware for the Thule Ski Carrier Adapter TH987XT (discontinued). Unfortunately they are not in a kit together and we do not have every part, but I will list all of the parts and part numbers that you will need and we have below. I have indicated the items that will need to be ordered in quantities of two. Replacement U-Bolt # 853-3105 Replacement Spacer (need 2) # 853-1881 3 Wing Hand Knob (need 2) ...
  view full answer...
• Replacement Thule Thread Hitch Pin and Trailer Hitch Mount Bike Rack Shank Adapter
  It sounds like you need the Thule Snug Tite Hitch Lock and Anti-Rattle Device, # THSTL2, or just the pin part # 853-5917. It also sounds like you need the Shank Adapter, # 853-7292. This will allow the bike rack to fit in a 2 inch trailer hitch. It works with the Thule Ridgeline, # TH954 and the Thule Roadway, # TH914XT.
  view full answer...
• Can the Thule Ride-On Adapter be Ordered without Crossbars
  We don't have a kit for the RIde-On Adapter TH532 without the crossbars, but we do carry all of the parts individually. 4 of the # 915-0625-54 4 of the # 853-2154 4 of the # 853-2156 4 of the # 853-5267 4 of the # 753-2854 4 of the # 936060054 4 of the # 853-5269 8 of the # 853-5293 1 of the # 853-5270-02 1 of the # 853-3593
  view full answer...