Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces 1 load bar clip for your Thule XT fairing for load bars. Fits all older model Thule AirScreen fairings.
Features:
Note: Compatible only with older Thule AirScreen fairing models. Newer AirScreen fairing models need item 1500056059.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com, and today we're gonna take a brief look at this replacement load bar clip for Thule roof rack fairing. Now if you're needing to replace one damaged or missing load bar clip for your Thule XT fairing for load bars, then this is exactly what you are going to need. Specifically, this will work with the XT fairing for load bars with our item number TH870XT. This may be used with Thule square bars with the adapter that you can find on our website using item number 853-7362. Now you are going to receive one load bar clip and the overall length of this is 5 inches. And at the widest point right here, it's about an inch wide.
And because this load bar clip is the replacement from Thule, you can have the confidence that this will work with your roof rack fairing from Thule. That's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..
Average Customer Rating: 4.8 out of 5 stars (293 Customer Reviews)
Replaces 1 load bar clip for your Thule XT fairing for load bars. Fits all older model Thule AirScreen fairings.I ordered the replacement clips for my Thule wind fairing to fit my aftermarket roof rack crossbars and was worried they would not fit since the service rep at Thule said the fairing could only be fitted to square crossbars, which mine are not. I saw these clips at etrailer and they looked to be the same shape as my crossbars and since they were so cheap I ordered a set. It turned out they fit perfectly and am now able to use the fairing after all.
To be fair, I bought this to adapt my Thule fairing to a non-Thule rack. While not perfect, it fits well enough to work. Nice having that adaptability so I didn't have to spend on another fairing.
Worked perfectly to replace the old, brittle plastic for my Thule wind deflector.
I have an older Thule roof rack fairing and a few of the clips that hold the fairing to the roof rack had failed. I was concerned that I would have to replace the entire assembly for more than $xxx. I was delighted to find that etrailer had the fairing clips. They saved me close to $xxx and the fairing for the roof rack is as good as new a very after I installed the clips. Thanks, etrailer!
The load clip bar was a very good price and fit perfect on my fairing
I went through an automatic car wash and the fairway was ripped from the roof rack when I rolled out. Went looking for this part and etrailer was the only one who had it. Fits great on my Thule wind visor, easy install. From what I can tell it looks identical to original clip. Broken clip on left, etrailer replacement clip attached to visor. Fast delivery.
Well made and perfect fit. Order was processed quickly and tracking was flawless.
The clips are exactly what is needed and are identical to the originals. And they came quickly with the tracking info extremely accurate. etrailer is a very serious and competent company that is a great resource for Thule spare parts and obviously many other wonderful products
This was a part I need to replace on a legacy Thule wind fairing. I could not find the part anywhere, even on the Thule website. Fortunately I was able to locate and order it on the Etrailer.com website. Another part (same Thule product also needed replacement, about a day after and I also found and ordered that part from Etrailer. I just wish I could have ordered them both at the same time, and saved the shipping costs on the 2nd order. Definitely happy that I was able to find both parts here!
The parts fitted perfect! I even have an off brand $40 roof rack and they looked to be the same shape and they snapped right on! I got the fairing for free from a friend and it was nice spending less than $20 to get them fitted perfect.
They’re good.
Excellent product at a very reasonable cost! Will go to eTrailer.com again for all my future adventure needs!
Clips arrived on time and were able to be installed in minutes. Good quality and great price! Completed the addition of my wind visor for my Thule roof rack.
Very happy with the product, fit perfectly and install was a breeze. Such a breeze I’m actually upset that I put this part off for so long! Great quality, and shipping was great as well. Even received the package 2 days early! Thanks etrailer, great work and keep it up!
The Thule load bar clip is a small but essential part of the roof rack fairing system. While searching the web for a replacement, what caught my attention was how easy it was to find it via "etrailer.com," even compared to the manufacturer's website and other sporting good outlets that carry the Thule brand. Unlike those other sites, "etrailer.com" let me see exactly what I looking for, making this replacement procedure quick and seamless. I had the part in just a few days. Definitely will recommend this vendor for hard to find parts.
Ned
6/1/2016
So far so good - the Thule wind fairing load bar clips are working great, just as designed. They are only stressed twice per year: once on spring and once off fall. If they become brittle with age or slight usage I havent noticed it. And again, its great that etrailer has the inventory and easily navigated web site to help find these parts.
Everthing fits like a glove at half the price!
Direct replacement.fast shipping.unbeatable priceing.satisfied customer.
Perfect fit. Fast delivery and reasonable price.
I have had a great experience with etrailer.com. I have purchased Thule parts to repair a Thule fairing damaged at in an automated car wash and the parts fit perfectly, restoring my Thule rack to brand new condition. I also purchased a trailer hitch which i installed myself. The instructions provided were excellent.
The product doesn't have dimensions that the hook will go around and I thought that these would fit on my crossbars but the bars are too wide and these won't fit. I can't return them or else I would lose more money on shipping. Pretty disappointed that I can't get my money back because the dimensions are wrong.
Mike L.
10/8/2018
These fairing mounting clips are meant for use with Thule square profile crossbars with the # 853-7362 adapters or the old elliptical profile Thule crossbars, but not the Aeroblade.
Helpful Links
Similarly to my other reviews my bike carrier and roof rack were damaged by a tree. I'm glad to find the misc parts I need to restore my setup. etrailer has the best price on all the items I needed. These were back ordered, but etrailer did a great job notifying me of the status of my order. I was very happy when they got these in stock faster then they estimated!
Perfect replacement for my Thule wind fairing. Fast shipping and inexpensive.
Ben O.
7/11/2020
Still works like original parts.
Working great! Ty.
What you see is what you get and it's exactly what you need. Speedy delivery and excellent customer service...I'll be ordering for these guys again for sure!
1 of the 2 clips did break and they do not fit thule square bars. Also, no hardware is provided.
Victoria B.
8/17/2020
Thule does not include hardware with many of their replacement parts as most often the original hardware can be re-used. In order to install these clips on a Thule Square Bar, this adapter 853-7362 is required.
Helpful Links
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chris P.
4/11/2017
still works great, no issues