View Cart
Tekonsha Primus Mounting Dash Clip

Tekonsha Primus Mounting Dash Clip

Item # 6927

lowest price pledge

Retail:$12.09

Our Price: $6.98

You Save: 42%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.07 lbs

Quantity: 
In Stock, Ships Today
Tekonsha Primus Mounting Dash Clip Mounting Brackets 6927
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Brake Controller
  • Mounting Brackets
  • Tekonsha
Call 800-298-8924 to order Tekonsha accessories and parts part number 6927 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for Tekonsha Primus Mounting Dash Clip. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (66)
  • Q & A (23)
  • Videos (1)
  • Photos
  • Why etrailer?

Tekonsha Accessories and Parts - 6927


Tekonsha Primus Mounting Dash Clip

  • An additional mount allows you to easily transfer the Tekonsha Primus brake controller from one vehicle to another
  • Screws sold separately


6927 Tekonsha Primus Mounting Dash Clip







Video of Tekonsha Primus Mounting Dash Clip


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Tekonsha Brake Controller 6927 Review

Today we're going to review part number 6927. This is the Tekonsha Primus Mounting Dash Clip. This part is what will usually come when you purchase a Tekonsha Primus brake controller. This would be the clip that comes with it. This part here would be used a either a replacement part or you can also use this as an additional mount that allow you to easily transfer your Primus Tekonsha brake controller from one vehicle to the other. Basically as you can see it has the mounting holes up here. You just mount this under your dash and then these clips right here, these two front clips will clip right onto the Primus brake controller. Once you set it in there it will clip into place.

You can pull it out to remove it. If you have an extra one of these in another car, you can just pop the brake controller in like that. The screws that are used to mount this are sold separately or you can use screws you might already have. That should do it for the review on part number 6927, the Tekonsha Primus Mounting Dash Clip. .


Customer Reviews

Tekonsha Primus Mounting Dash Clip - 6927

Average Customer Rating:  4.9 out of 5 stars   (66 Customer Reviews)


- 6927
by:

Purchased the Tekonsha Primus mount and brake controller harness 3040-P. I had the controller installed in my 2012 4runner when I traded it in Toyota was going to remove theses items and return the to me but the person who inspected the 4runner my trade in threw them away I went back the nest day to the dealer and they told me the bad news. So these are to replace my lost items in my 2014 Tundra they switch over from one to another Toyota. 156194



- 6927
by:

So, you want me to review with vigor how excited and pleased I am because I received a plastic part that even a idiot could ship without error. No one jumped hurdles or sacrificed in any above averaged way that went beyond a basic merchant-customer requirement. Seriously, Your looking for a big hug and shout out when all you did was what you should have done without regard. You did NOTHING that McDonald's wouldn't have done except insult me by asking for a great review. 575553



- 6927
by:

I am so glad that you guys offer this separate, we traded our truck in for a new one and I forgot to take this out, I thought I was going to have to make something, but low and behold my favorite trailer shop had it! Thank you etrailer, and Londyn was very helpful and knew right away what I needed. 123691


Comments

Still working great, and if I trade this truck in, I know where to get a new bracket!

Brian L - 06/24/2015

12766

- 6927
by:

Bought this holder for my trailer brake unit. Along with the wiring harness I reviewed. With this harness I can remove trailer brake unit from one vehicle to another. Great service, fast delivery. 617407



- 6927
by:

Amazing customer support! 603647



- 6927
by:

The Primus IQ Brake Controller bracket arrived very quickly and was well packed. 599501



- 6927
by:

Nice for moving controller to other veh icles. 597245



- 6927
by:

Perfect fit, just as described, and still doing what I need it to do. Thanks, etrailer is my 1st choice for anything I need for my truck and towing needs for sure. 574545



- 6927
by:

Absolutely Brilliant, I am really impressed with all, especially as I am trying to beat the snow up here in Canada. Getting this out today really helps. I must say that your sites customer follow up, tracking, & included videos is way too cool. Thanks a lot for the effort & take Good Care. 561384



- 6927
by:

Works great and fit . 557261



- 6927
by:

Great Price and shipped fast. Thank You 547496



- 6927
by:

Excellent for what I need it for. Perfect fit for the unit I had to mount. 542093



- 6927
by:

product was perfect as described fit perfect and was very happy i even found it offered. accidents happen and when the plastic bracket of a 4 year old brake controller broke i figured i would never find one but thanks to etrailer my problem was solved. 524192



- 6927
by:

Unbelievable Service! Order placed and shipped same day! Thanks 512090



- 6927
by:

A good quality mount. I only wish mounting srews came wit it. 499981


Comments

Holding up great, very sturdy.

Kevin - 04/24/2019

54413

- 6927
by:

etrailer folks found me the replacement part I needed. Works perfect. Great service! 499870



- 6927
by:

very happy with product. Fast service and good communication with seller. Thank you, 487029



- 6927
by:

Works exactly as described 481066



- 6927
by:

Was very satisfied with my order 463087



- 6927
by:

Work great with my brake controller 461180



- 6927
by:

Great products now I can have my break controller in either of my vehicles 456801



- 6927
by:

Exactly what was ordered and arrive as promised. Fits the controlled perfectly. Great Quality product. 455269



- 6927
by:

Perfect fit, used it to allow transferring our brake controller into our second vehicle. Easy two screw mount to dash panel. Just be careful to leave enough space next to it for your parking brake release lever or other moving parts to operateā€”I would recommend a test fit with good double sided tape before permanently screwing to mount. Learned the hard way on my Chevy express. Measure twice and drill once!! 450277



- 6927
by:

This allows me to switch my brake controller between vehicles. I used this as part of several parts to install hitch and brake controller on a 2017 Jeep Cherokee latitude v6. Parts used 118605, C13171, 6927, 7894 and ETBC7. 443612



- 6927
by:

Great service 430302



- 6927
by:

This was my first time ordering here and it won't be my last. Web site was easy to navigate, prices were reasonable and shipping fast 429722



- 6927
by:

Good 413110



- 6927
by:

great service-great product and fast shipping-thanks chelsy 407749



- 6927
by:

exactly what I was looking for 389837



- 6927
by:

Item arrived on time and as promised 381124



- 6927
by:

Best price, easy ordering. When it was going to be delayed for only two days, I got a personal call to make sure I was aware and apologize for the tiny delay. Awesome customer care - thank you. 379894



- 6927
by:

Great for my 2nd truck 377153



- 6927
by:

Product came as ordered in a timely fashion, will use your company for future requirements 361306



- 6927
by:

excellent,exactly what i wanted 359348


Comments

working great, no problems, thanks for the best service

michael m - 03/27/2018

36518

- 6927
by:

Once again.... excellent job. Order arrived timely and well packaged. Thanks and we will see you again soon. 357237



- 6927
by:

Great Product and affordable defenately recommend this part. 331433



- 6927
by:

Great product at a great price. 278295



- 6927
by:

Worked great 272296



- 6927
by:

The brake controller rattles a bit when in this bracket. It did not do so when I used the bolt-in bracket. Not a major issue, just sometimes a little annoying. This bracket does make it much easier to switch between vehicles. E trailer provided their usual quick service and reasonable shipping charges. 258929



- 6927
by:

Mounts ant fits perfect. thanks 255032



- 6927
by:

Yes this part was the right one too! 239194



- 6927
by:

Fits perfectly and the price was great. Very fast shipping too. 236567



- 6927
by:

I needed another mounting bracket for my Primus IQ brake controller. etrailer had the best price with fast reasonable shipping. I would recommend their products and services. 231907



- 6927
by:

I needed another mounting bracket for my Primus IQ brake controller. etrailer had the best price with fast reasonable shipping. I would recommend their products and services. 231906



- 6927
by:

Just bought this to use my new brake controller in a second car. Haven't installed it yet 217841



- 6927
by:

Once I got the part number, I found it here at the lowest price. The bracket works perfectly and it arrived fast! I will continue to do business with etrailer.com for my trailering needs. 217476



- 6927
by:

Ricky and etrailer were extremely helpful when I ordered my parts. I originally requested a Plug-In wiring adapter for my brake controller but also found out they carried the mounting clip for my Tekonsha Primus IQ brake controller. Now I can easily swap out the controller between my tow vehicles. Great customer service!!! 206349



- 6927
by:

Received quickly with standard shipping. Fits perfectly. 201765



- 6927
by:

Mounting Dash Clip is working well. It was an easy install and the quality of the product was great. Thanks for the quick delivery. Rodney 195120



- 6927
by:

I have 3 of these mounts in different vehicles so I only need 1 controller , saves a lot of money not buying a controller for every rig 178715


50
66
Show More Reviews

Ask the Experts about this Tekonsha Accessories and Parts
Do you have a question about this Accessories and Part?


  • Mounting Dash Clip for the Tekonsha Primus IQ Brake Controller
  • The plastic under dash mount for the Tekonsha Primus IQ, part # TK90160, is the Tekonsha Primus Mounting Dash Clip, part # 6927. We also carry the Replacement Mounting Kit Bracket # 5280 as well. The hardware is not provided so you will need to pick some up at your local hardware store.
    view full answer...

  • Can the Tekonsha Primus IQ Brake Controller be Installed Vertically
  • Yes, the Tekonsha Primus IQ # TK90160 can be installed at a vertical angle between 0 and 90 degrees. You will want to make sure that it is leveled horizontally though. Once set at the desired angle, the IQ will level itself out so the internal sensor will function properly. I have attached a review video of the Primus IQ for you to check out as well as 2 pictures demonstrating the correct way to mount it. If you are in need of a mounting bracket you can use the Replacement Mounting...
    view full answer...

  • Replacement Mounting Bracket for a Primus IQ Brake Controller
  • There are 2 brackets that you can use for the Primus brake controller # TK90160. First, you can use # 6927. I have linked a video of this part for you. And second, you could use # 5280. I have linked a video of this part as well.
    view full answer...

  • Additional Mounting Bracket for Tekonsha Primus IQ
  • There are replacement mounting brackets available for your Primus IQ # TK90160; the Mounting Dash Clip # 6927 as well as the Mounting Kit Bracket # 5280. Please note the 3/8" screws necessary to mount the brackets do not come with the parts.
    view full answer...

  • Brake Controller Installation in 2015 Toyota Tacoma
  • The # 3040-P is indeed the correct brake control wiring adapter for your 2015 Tacoma. Due to the presence of the knee airbag, the preferred location to the right of the steering column might not be feasible. If there's not a suitable location to the right of the steering column where the controller could be mounted so that it's parallel to the direction of travel, you'll need to consider an alternate spot. If you watch one of the videos I've linked you to, you can see the controller...
    view full answer...

  • Recommended Brake Controller For 2007 Chevrolet Silverado Classic
  • The Tekonsha Voyager Trailer Brake Controller # 39510 and Tekonsha Primus IQ Trailer Brake Controller # TK90160 are excellent brake controllers to work with your 2007 Chevy Silverado. . They are both proportional brake controllers but the mounting and leveling is a little different but similar Mounting range or leveling means that since brake controllers are designed to work properly being mounted at certain angles, the given mounting range on the # 39510 (90 degrees) indicates to what...
    view full answer...

  • Tekonsha Primus Trailer Brake Controller Wiring Harness for a 2010 Dodge Ram
  • Yes, you can get the brake controller wiring harness by itself for a 2010 Dodge Ram. It is part # 3021-P. If you plan on moving the controller back and forth between more than one vehicle, you may also be interested in getting an extra mounting pocket, part # 6927. I have included links to the installation details for both the brake controller and the wiring harness for you to view.
    view full answer...

  • Replacement Tekonsha Primus IQ Brake Controller Mount and Harness
  • The replacement Primus IQ mount you would want is the part # 6927. This is the quick-release style mount that will allow the controller to easily be installed and removed. For a replacement harness with blunt cut wires you would want the part # 20127.
    view full answer...

  • Installing the Tekonsha Primus IQ Brake Controller on a 2013 Dodge Durango
  • The correct plug-in brake controller adapter that you will need for your 2013 Dodge Durango and your Primus IQ brake controller is part # 3045-P. We have installed the Primus IQ on a 2013 Durango using this harness, so I attached the installation video for you to check out. The factory brake controller port is located under the dash, to the left of the steering column by the emergency brake pedal. If you would like a replacement mounting bracket for the new SUV, you can use part # 6927.
    view full answer...

  • Recommended Mounting Bracket for Tekonsha Primus IQ Electric Trailer Brake Controller
  • For a second vehicle, we have the Tekonsha Primus Mounting Dash Clip # 6927 as well as the Replacement Mounting Kit Bracket for Primus - Envoy - Pilot Brake Controllers # 5280. This will allow you to take your Primus IQ brake controller with you and use it between those vehicles.
    view full answer...

  • Additional Wiring Harness and Bracket Needed to Mount Tekonsha Primus IQ Brake Controller # TK90160
  • You will need Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers, # 7894, in order to mount the Tekonsha Primus IQ Brake Controller, # TK90160, in your 2010 Chevrolet Express Van. I have attached a video of this brake controller being installed on a 2005 Chevrolet Express Van to give you a good idea of the process. Now for an additional mount you will need the Tekonsha Primus Mounting Dash Clip, # 6927. Mounting screws are not included so I recommend grabbing those from...
    view full answer...

  • Installing Tekonsha Primus # TK90160 Brake Controller in 2010 and 2005 Dodge Grand Caravan
  • The Dodge Grand Caravan wasn't equipped with a connector under the dash for installing a brake controller, so there's no plug and play option available. This doesn't mean that a controller cannot be installed, you'll just need to hardwire in the controller using our Brake Controller Installation Kit, part # ETBC7. The controller includes everything needed to install a brake controller, but a 4-pole trailer connector needs to be in place on both vehicles. For the 2010 Grand Caravan, I'd...
    view full answer...

  • Additional U-Shaped Brake Controller Mounting Bracket to Mount Brake Controller In a Second Vehicle
  • Because repeatedly removing and tightening the fasteners that hold the controller to the bracket will tend to enlarge the holes over time, I wouldn't recommend the Hopkins Agility brake controller you mentioned. If the mounting holes in the side of the controller become enlarged or stripped, the controller won't be held firmly in the bracket. Since the Agility controller needs to be mounted beteween -20 degrees nose down and + 70 degrees nose up, if the controller is loose in the bracket,...
    view full answer...

  • Replacement Mounting Bracket for Tekonsha Primus Trailer Brake Controller # TK90160
  • We do offer a replacement mounting bracket for the Tekonsha Primus Trailer Brake Controller # TK90160. Dash Clip # 6927 will serve as a proper replacement or for use in a second vehicle. Please note that the mounting screws are not included.
    view full answer...

  • Can Primus IQ Brake Controller # TK90160 for 1999 Ram 1500 Work on 2016 Ram 2500 as Well
  • One of the greatest things about the Tekonsha brake controllers is how universal they are. If your 1999 Dodge Ram Laramie came with a factory connector at the rear then you will simply need to use the Tekonsha Plug-In Wiring Adapter # 3020-P to install the Primus IQ # TK90160. The only thing that you will need to change for a 2015 of 2016 Ram 2500 would be the Plug-In Adapter. For either of those newer pickups you will need part # 3024-P instead. Extremely simple to swap the brake controller...
    view full answer...

  • How Can I Use One Brake Controller on a 2006 Jeep Commander and a 2004 Jeep Wrangler Unlimited
  • The Tekonsha Primus IQ Brake Controller, # TK90160, would be an excellent choice for your 2004 Jeep Wrangler Unlimited and your 2006 Jeep Commander. This brake controller comes with one wiring harness and dash clip, so you will just need one more wiring harness, # 20127, and one more dash clip, # 6927. This will allow you to simply unclip the wiring harness and dash clip from the brake controller and transfer it from Jeep to Jeep. The brake controller wiring harness will need to be...
    view full answer...

  • Parts to Swap Tekonsha Primus Brake Controller Between 2004 Ford F-150 and 2013 Chevrolet Silverado
  • Yes, it is possible to swap the Tekonsha Primus Brake Controller, # TK90160, between your 2004 Ford F-150 and your new 2013 Chevrolet Silverado. In order to use the brake controller in the Silverado, you will need to mount Dash Clip, # 6927, and install the Tekonsha Wiring Harness, # 7894. The needed wires are already run up under the dash of the Silverado so you will just need to connect the Tekonsha wiring harness to your vehicle wiring. I have attached a link to an installation video...
    view full answer...

  • Parts Needed to Add 7-Way Trailer Connector for Brake Controller on 2001 Chrysler Town and Country
  • We have just about everything you are going to need packaged in one kit. Take a look at the 4 and 7-Way installation kit # ETBC7. This kit is going to provide a 7-Way (the existing 4-Way will just plug into the 4-Way receptacle on the adapter) and it comes with all the wiring and circuit breakers you will need to wire in the brake controller. The only other parts you will need are a circuit tester like # ALL640595 unless you already have one, the wiring harness for the controller, #...
    view full answer...

  • What Parts Are Needed to Install a Tekonsha Primus Trailer Brake Controller on a 2002 Dodge Ram
  • In order to install the Tekonsha Primus in your 2002 Dodge Ram with a factory tow package, all you will need to the controller itself and the mounts from the other vehicle and then add wiring harness # 3020-P. Or, if you want to be able to switch back and forth between the vehicles, you can add a separate bracket to the truck, # 6927, and the wiring harness. The mounting hardware for the bracket is not included so you will need 2 self-tapping screws. I have included a link to a video...
    view full answer...

  • Switching Vehicles While Using The Tekonsha Primus IQ Trailer Brake Controller
  • The correct pigtail wiring harness and mounting bracket that will allow you to use the Tekonsha Primus IQ Trailer Brake Controller part # TK90160 in your 2014 Toyota Sienna is the Replacement Brake Control Plug-In Harness for Tekonsha part # 20127 and either the Replacement Mounting Kit Bracket for Primus part # 5280 or the Tekonsha Primus Mounting Dash Clip part # 6927. As a general rule of thumb, you will need to use a weight distribution system if the gross trailer weight (GTW) is...
    view full answer...

  • Can Tekonsha Primus Brake Controller be Installed Easily in More than One Vehicle
  • The part # 3070-P is a separate product from the brake controller part # TK90160 so if you wanted to order two of the harnesses and one controller you could easily be able to swap the controller between two vehicles. For a second mounting bracket you would also need the part # 6927.
    view full answer...

  • Parts Needed to Install a Primus Brake Controller on a 2007 Toyota Tacoma and 2008 GMC Yukon
  • For the 2007 Toyota Tacoma, if it is using wiring harness # 3040-P then you will not need anything else for the Tacoma. Or if using the factory Toyota harness you could replace it with # 3040-P. The harness will plug into the Primus brake controller # TK90160. I have linked a video showing how it would install on your generation Tacoma. On the 2008 GMC Yukon you will need plug-in harness # 20127 because the Yukon has a tow package wire bundle under the dash and not a place to plug into....
    view full answer...

  • Mounting Bracket Replacement for Draw Tite I-Stop Brake Controller
  • Yes, the mounting bracket # 6927 that you referenced is the correct bracket for your Draw Tite I-Stop brake controller. Your brake controller is also known as the Tekonsha Primus I-Q part # TK90160.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Laura H
Photos by:
Zach O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924