bing tracking image
  1. Accessories and Parts
  2. Tekonsha
  3. Trailer Brake Controller
  4. Mounting Brackets
Replacement Mounting Kit Bracket for Primus - Envoy - Pilot Brake Controllers

Replacement Mounting Kit Bracket for Primus - Envoy - Pilot Brake Controllers

Item # 5280
lowest price pledge
Retail:$24.25
Our Price: $6.80
You Save: 72%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.12 lbs
Quantity: 
In Stock
Replacement Mounting Kit Bracket for Primus - Envoy - Pilot Brake Controllers Mounting Brackets 5280
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Call 800-298-1624 to order Tekonsha accessories and parts part number 5280 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for Replacement Mounting Kit Bracket for Primus - Envoy - Pilot Brake Controllers. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (18)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Tekonsha Accessories and Parts - 5280

  • Trailer Brake Controller
  • Mounting Brackets
  • Tekonsha


Features:

  • Fits Tekonsha Primus, Envoy, and Pilot brake controllers
  • Quantity: 1 bracket



5280 Tekonsha Replacement Mounting Bracket





Video of Replacement Mounting Kit Bracket for Primus - Envoy - Pilot Brake Controllers

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Tekonsha Brake Controller 5280 Review

Today we're going to be taking a look at part number 5280. This is the Tekonsha Replacement Mounting Kit Bracket for the Tekonsha Primus, Envoy and Pilot brake controllers. This bracket is going to mount under the dash of your vehicle with these two mount locations and, here on the side, it's going to have the mount holes to fit the layout of the Primus, Envoy and Pilot brake controller mounting locations. A few measurements to go over real quick with the mounting bracket, taking a look at the measurement here, inside edge to inside edge, looks like it's going to give us a measurement of about 3 and 7/16ths of an inch. Outside edge to outside edge is going to be about 3 and 5/8ths of an inch. The leg is going to give us a measurement of about 1 and 3/4 of an inch from the bottom of this portion here to the end of the arm. The overall width is going to measure about 1 and 1/16th of an inch.

The distance between the two mounting holes, center on center, looks to be about 1 and 5/8ths of an inch. It's got the pre-drilled mounting holes here on the side to fit the mounting locations on the brake controllers. The elongated one here is to allow the brake controller to pivot. That way you can choose the angle that you need. It's made from a nice metal construction, very strong and durable. It's going to hold up for a long time. That's going to do it for today's review of part number 5280.

This is Tekonsha's Replacement Mounting Bracket for the Tekonsha Primus, Envoy and Pilot brake controllers. .


Customer Reviews

Replacement Mounting Kit Bracket for Primus - Envoy - Pilot Brake Controllers - 5280

Average Customer Rating:  4.9 out of 5 stars   (18 Customer Reviews)


- 5280
by:

Shipping was very fast. I ordered part late Saturday night and received bracket on Wednesday afternoon. I have ordered several items from etrailer and have been completely satisfied with the quality and customer support.



- 5280
by:

Very pleased with this mounting bracket. It is an exact fit for my Primus brake controller. I am mounting it in a motorhome for brakes on a car hauler I plan to tow. Shipping and communication were rapid, responsive, and accurate. Will do business again.


Comments
Bracket is working well. Very happy with product and E-Trailer service.
Jerry - 05/30/2020


- 5280
by:

Received product within the stated time. You tube videos were very helpful in the installation process. Took about 30 min to install. Have not hooked it up to the trailer yet.


Comments
Products have worked good.
Casey B - 06/04/2018



- 5280
by:

Needed a replacement bracket for a second vehicle. Installed easily. Etrailer worked to process the order quickly as I needed the bracket immediately. Very pleased with the product and order experience.



- 5280
by:

It’s the right bracket for my trailer brake receiver.



- 5280
by:

Works great on my town and country. Easy to install and not in the way.



- 5280
by:

Works great on my town and country. Easy to install and not in the way.



- 5280
by:

Was a little to big for my unit but I was able to bend it to fit. appears to be working fine.



- 5280
by:

Solid product with the right price. Shipping was fast and easy.



- 5280
by:



- 5280
by:

Fit perfectly



- 5280
by:

Exactly what I needed at a great price and with fast delivery.



- 5280
by:

great service...good prices, these guys are the best!



- 5280
by:

Part was the right one. Thank you



- 5280
by:



- 5280
by:

Worked like it's supposed to.



- 5280
by:



- 5280
by:


18
18

Ask the Experts about this Tekonsha Accessories and Parts



  • Replacement Mounting Bracket for Tekonsha PowerTrac # 39523 Brake Controller
    For your Tekonsha PowerTrac brake controller, you would want the smaller bracket, part # 2178. The # 5280 you referenced would be too wide, and wouldn't work.
    view full answer...
  • Replacement Brake Controller Mounting Bracket
    From the description you gave, I recommend the Tekonsha Replacement Mounting Bracket, part # 2178. I have attached a photo of this bracket that shows the dimensions. You can check it out and see if it matches the bracket you need for your brake controller.
    view full answer...
    Image 1 for
  • Hardware for Tekonsha Mounting Kit # 5280
    The Mounting Bracket # 5280 for your Envoy brake controller does not include the mounting hardware and Tekonsha does not provide this. To mount the bracket all you need are some 3/8 inch screws like # 1131832. You can also just obtain some at a local hardware store if that is easier. The holes on the bracket will match up to the mounting hole pattern on your Envoy.
    view full answer...
  • Recommended Mounting Bracket for Tekonsha Primus IQ Electric Trailer Brake Controller
    For a second vehicle, we have the Tekonsha Primus Mounting Dash Clip # 6927 as well as the Replacement Mounting Kit Bracket for Primus - Envoy - Pilot Brake Controllers # 5280. This will allow you to take your Primus IQ brake controller with you and use it between those vehicles.
    view full answer...
  • Can etrailer.com A-Frame Trailer Coupler Be Adjusted
    The etrailer.com A-Frame Trailer Coupler # CA-5280-RB that you referenced does have a nice and convenient squeeze latch that allows for quick and safe coupling, but there aren't any adjustment points on the underside to tighten up a connection. Those bolts that you mentioned are just to hold the jaw in place. We do not have a standard A-frame coupler that has the ability to adjust like this. If you are experiencing a lot of movement with your current setup there might be some rust or...
    view full answer...
  • What is Tongue Weight Rating of A-Frame Trailer Coupler w/ Round Jack Hole # CA-5280-RB
    The tongue weight capacity of the 15k trailer coupler part # CA-5280-RB that you referenced is 2,250 lbs.
    view full answer...
  • Dimensions of the A-Frame Trailer Coupler # CA-5280-RB
    I went out to the warehouse and measured the A-Frame Trailer Coupler # CA-5280-RB and found that from the widest point to the smallest point it measured 10-9/16" and 2-5/8" respectively. This will give you the angle. The overall height of the piece that fits over the frame was about 3-7/8" while the inner height (where it site on the frame) measured about 3-1/4". I have attached a picture and a review video for you to check out.
    view full answer...
    Image 1 for
  • Mounting Bracket Recommendation for Tekonsha Primus IQ Brake Controller
    Yes, for a second install bracket for the Primus IQ brake controller part # TK90160 you would want the part # 5280.
    view full answer...
  • Can Tekonsha Envoy Brake Controller From Older Dodge Ram be Installed in 2016 Ram
    Yes, you can indeed transfer your Tekonsha Envoy Brake Controller from your 2006 Dodge Ram to your new 2016 Ram. For simple installation, you will just need the Tekonsha Plug-In Wiring Adapter # 3024-P. One end of the harness will plug into the built-in port beneath the truck's dash, while the other end will connect directly to the brake controller itself. I have attached the written installation instructions that you can also check out. If you need another mounting bracket, you can...
    view full answer...
  • A-Frame Coupler Recommendation for 14k Trailer
    Ram couplers are solid couplers that as long as you stay under the capacity of them they will work great. I would not recommend a 12.5k coupler on a 14k trailer though. Instead you'd want to go with a coupler with a 15k capacity like the part # CA-5280-RB instead. I attached a review video for this coupler for you to check out as well.
    view full answer...
  • Mounting Bracket for Tekonsha Primus IQ Trailer Brake Controller
    We have two different types of mounting brackets to get the Tekonsha Primus IQ mounted to your dash. We have the plastic clip # 6927 that you can fasten to your dash and the brake controller will clip in. The other option we have is the metal mounting bracket # 5280 that you will need to install the brake controller to with screws.
    view full answer...
  • What Is The Angle For The etrailer A-Frame Trailer Coupler?
    The etrailer A-Frame Trailer Coupler w/ Round Jack Hole # CA-5280-RB uses the standard a-frame angle of 50 degrees. The length from the rear of the coupler to where the coupler meets its narrowest point is approximately 9" long. I have include this information in the picture below.
    view full answer...
    Image 1 for
  • Installing Metal Replacement Mounting Bracket for Tekonsha Primus IQ
    In order to use the Replacement Mounting Kit Bracket # 5280 you'll just want to use small/short screws that can be screwed into the spots where the clips on the # 6927 would normally fit on the side of the Primus IQ # TK90160. I've attached a picture of the side of the Primus IQ that show the spots where the clip on bracket would attach, and you'll want to attach the # 5280 mounting bracket with screws into those holes. The different holes on the # 5280 will allow you to mount it flat or...
    view full answer...
    Image 1 for
  • Does the Pilot Brake Controller have to be Mounted in Any Certain Position
    The Pilot brake controller # 80550 is a time delay controller so it does not have to be mounted level or in a certain position. The only stipulation is that it needs to be within easy reach of the driver. I have included a link to the installation details for this controller for you. To plug this controller directly into your 2007 Toyota Tundra (if the truck came with a factory 7-Way) use harness # 3040-P. And if you need a new mounting bracket for the controller it is # 5280.
    view full answer...
  • Replacement Mounting Bracket for a Primus IQ Brake Controller
    There are 2 brackets that you can use for the Primus brake controller # TK90160. First, you can use # 6927. I have linked a video of this part for you. And second, you could use # 5280. I have linked a video of this part as well.
    view full answer...
  • Additional Mounting Bracket for Tekonsha Primus IQ
    There are replacement mounting brackets available for your Primus IQ # TK90160; the Mounting Dash Clip # 6927 as well as the Mounting Kit Bracket # 5280. Please note the 3/8" screws necessary to mount the brackets do not come with the parts.
    view full answer...
  • Mounting Dash Clip for the Tekonsha Primus IQ Brake Controller
    The plastic under dash mount for the Tekonsha Primus IQ, part # TK90160, is the Tekonsha Primus Mounting Dash Clip, part # 6927. We also carry the Replacement Mounting Kit Bracket # 5280 as well. The hardware is not provided so you will need to pick some up at your local hardware store.
    view full answer...
  • Can the Tekonsha Primus IQ Brake Controller be Installed Vertically
    Yes, the Tekonsha Primus IQ # TK90160 can be installed at a vertical angle between 0 and 90 degrees. You will want to make sure that it is leveled horizontally though. Once set at the desired angle, the IQ will level itself out so the internal sensor will function properly. I have attached a review video of the Primus IQ for you to check out as well as 2 pictures demonstrating the correct way to mount it. If you are in need of a mounting bracket you can use the Replacement Mounting Kit...
    view full answer...
    Image 1 for Image 2 for
  • What Coupler Fits the Square Tube Trailer Jack TJDA-5000S
    The only coupler we offer compatible with the part # TJDA-5000S is the A-Frame Trailer Coupler w/ Square Jack Hole # CA-5280-QB which is designed for 2-5/16 inch hitch balls. Reason is due to the higher capacity nature that the jack and coupler have and the fact that 2 inch hitch balls just don't have the same towing capacities as 2-5/6 inch.
    view full answer...
  • Switching Vehicles While Using The Tekonsha Primus IQ Trailer Brake Controller
    The correct pigtail wiring harness and mounting bracket that will allow you to use the Tekonsha Primus IQ Trailer Brake Controller part # TK90160 in your 2014 Toyota Sienna is the Replacement Brake Control Plug-In Harness for Tekonsha part # 20127 and either the Replacement Mounting Kit Bracket for Primus part # 5280 or the Tekonsha Primus Mounting Dash Clip part # 6927. As a general rule of thumb, you will need to use a weight distribution system if the gross trailer weight (GTW) is more...
    view full answer...
  • Replacement A-Frame Trailer Coupler For 1978 Airstream With 50 Degree A-Frame
    It would appear that that your 1978 Airstream had the standard 50 degree a-frame style coupler. You can verify this to ensure that the etrailer A-Frame Trailer Coupler # CA-5280-RB will fit correctly on your Airstream. I personally prefer the auto latching style couplers like the Demco 50-Degree A-Frame Trailer Coupler # 12660-97SP. This coupler for me is cleaner and works simpler with the latching system. The connection for the jack has nuts welded on to the bottom of the plate making...
    view full answer...
  • Parts Needed To Use Tekonsha Primus Bracke Controller In Second 2006 Chefvy Avalanche 1500
    I can certainly help you out. You will need part # 3015-P adapter that plugs into the back of the Primus brake controller, part # TK90160. The other end gets installed in the port in the electric junction box under your dash. The junction box is located to the left of the steering column above the carpet. You just remove the cover on the box and the adapter plugs into the second slot form the left as shown in the attached photo. You will also need the mounting bracket, part # 5280. If...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Wiring Adapter For Tekonsha Primus IQ For 2010 Ford F-150
    We can get your 2010 Ford F-150 set up to use the Tekonsha Primus IQ Trailer Brake Controller # TK90160, and what you will need first is the correct wiring adapter: - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 22292 This will be what you need no matter if your F-150 has the factory 4-flat or factory 7-way; and if you have that 7-way then you won't need any other parts. However, for the factory 4-flat you will need to add a 7-way with the Universal Installation Kit...
    view full answer...
  • A-Frame Trailer Coupler w/ Round Jack Hole That is Made in the USA
    This A-Frame Trailer Coupler w/ Round Jack Hole # CA-5280-RB is manufactured in China. We do have similar options like the Buyers Products A-Frame Trailer Coupler w Jack Hole # 3370091595 and Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole # 12660-97SP that are both made in the USA if that is what you are looking for.
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Laura H
Updated by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.