Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dual Plug In
(52 reviews)
Price: $13.87
In Stock
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dual Plug In
Item # 3062-P
Retail:$28.79
Our Price: $13.87
You Save: 52%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (52)
- Q & A (0)
- Photos
- Why etrailer?
Tekonsha Accessories and Parts - 3062-P
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the connector located beneath your vehicle's dashboard and left of the steering column, taped to another harness near the emergency brake pedal. There will be a 4-pin connector that mates with the adaptor.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
3062-P Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces Tekonsha 22284
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2022 Subaru Ascent with factory Tow Package
California residents: click here
Customer Reviews
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dual Plug In - 3062-P
Average Customer Rating: 4.8 out of 5 stars (52 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Scott02/27/2022
2020 Subaru Ascent
Installed easily and directions were very clear. Disappointed that the "installation notes" for this should have more clearly stated that the following is required: "Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness - 331-TPH-017".
Since I did not have it I just cut the black ended adapter off and hard wired it to the Redarc cord according to the wire colors.
Comments
You can wire it into the Red Arc controller like you have described. If you do want the plug and play option you can look at part # 331-TPH-017
Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness
$20.50.
-- Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness
$20.50.
Jenny N - 03/07/2022by: JustSomeGuy04/27/2022
2022 Subaru Ascent
This adapter coupled with a Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness (Item #331-TPH-017) worked as advertised to connect my 2022 Subaru Ascent with the factory tow package to a Redarc Tow-Pro Elite Trailer Brake Controller (Item #RED44FR).
by: Ken W03/24/2020
Tekonsha Prodigy P3 Brake Controller is Awesome. You have 3 levels of braking power to choose from with the Tekonsha brake controller. You can select a certain level, and even adjust the amount of braking power on the move, which is a great option. I had the Tekonsha controller in my Dodge pickup, then moved it to my Subaru Ascent, one year ago. I have been a professional driver for 49 years, with two national safe driving awards. Safety comes first, and Tekonsha helps me achieve that goal, every time I tow. The two pictures do not show the fully loaded cab of vehicle, or the 600 lbs of concrete bags. I was not pushing my allowed weight limit, although the Tekonsha P3 Brake Controller makes towing pleasant.
by: Frank NC07/10/2019
2019 Subaru Ascent
Needed a brake controller and wiring harness for our 2019 Subaru Ascent. Have always enjoyed easy ordering process and top quality products from etrailer; however, this time I wanted to make sure I got best fit for my intended use. Emailed Customer Svc and received next day a very nice email from Derek S, fully explaining his recommendation and suggesting the appropriate wiring harness for my Ascent. I placed the order, products arrived timely and installation took me maybe 1 hour, most of which was fabricating a bracket which allowed me to mount controller in a cavity under dash I “simply” created by popping out a fuse block cover. Tekonsha P-3 controller tucked neatly into cavity (see photo), plugged harness (3062-P) into existing Subaru plug and controller came on. Etrailer and it’s friendly, helpful staff ROCKS!!!
by: Didn t get the product on time07/19/2022
We ordered this product on June 29th and paid for next day shipping to get it before we left for vacation. We were told it would be delivered on July 5th the day before were to leave. I kept checking the progress and saw no activity until July 4th, a holiday! The package didn't get pickup by for shipping until the 5th. The tracking said though that it would be delivered by 12pm on the 6th. So we waited and it didn't come! We had to leave and luckily our friends were leaving the next day and brought it with them so we could have a trailer brake. I will be contacting the company for a refund on the shipping because we were told the item would go out the day we bought it and that we get it on July 5th. Neither of those happened. On the bright side the trailer brake worked great.
Comments
I am sorry about that! I expect that things were behind because of the holiday in your region. Customer service will contact you.
-- Sierra K - 07/22/2022by: Jennifer05/13/2022
I was going to make my own adapter plug, but found this...so easy, plug and play!
by: Michael03/11/2020
First understand that I have the mechanical ability of a gerbil. That being said. I had unit up and calibrated within 8 minuets of delivery by ups. It truly is plug and play. I am enclosing a picture of plug, harness attached to plug and unit sitting in little alcove to left of steering wheel that looks like it was made for it. It took 8
Minuets
by: Ronnie 01/21/2022
Plug and play. Great pictures of harness plug in the car. Installed adapter harness and controller in about 10 minutes.
by: 03/23/2022
Fit the car side fine, had to cut and splice to controller
by: Timothy09/28/2019
Subaru
I plugged the unit in the factory plug using
I have never installed or used a brake controller before. I used the connector that was suggested plugged it into the car's connector followed the instructions and it worked with no issues the hardest part, in my Subaru Ascent, was finding a place to put it luckily it fit in a cubby to the left of the steering wheel.
by: Jeff07/30/2022
Have not installed it yet, but I am confident in it working. If not I will retain all packaging materials and return it....thanks!
by: Don03/05/2022
This was just the connector I needed!!
by: Jeff C.06/26/2020
Easy to install with the plug and play wiring harness. It took me just a few minutes to connect and set up.
The instructions were easy to follow.
I've taken my R-Pod on a cross country trip with this brake controller as well as a couple of shorter trips. It works as advertised.
The only con is the quick release mounting bracket. I like that it is a quick release so that I can take it out and put it back in (when not in use, I keep it in the glove box in it's little nylon case with instructions), but it's easy to kick and knock out of alignment. It is supposed to stay aligned with the car, but I keep kicking the dern thing and having to reach down and straighten it out. It would be better if I just drilled another hole in the bracket, use a shim, and make the mounting bracket permanently straight.
Overall, it was worth the money and I'm totally happy with it's performance.
by: Herb B10/04/2021
Subaru
Fits the Subaru but an additional adapter is needed for the REDARC TowPro.
by: Al05/26/2022
great experience - on time delivery - good help in selecting product
by: Constantin01/21/2022
2021 Subaru Ascent
Fits perfectly and works great, eliminates the need to solder wires, just plug and play.
by: John 11/16/2020
2020 Subaru Ascent
Wiring adapter worked exactly as advertised. Added benefit - etrailer provided excellent instructions, pictures of connector location and links to installation videos.
by: Constance07/16/2019
Subaru
Diana was fantastic to work with and quickly helped me find the right parts for my new Subaru Ascent before it even arrived! She walked me through all the options and provided information on the right cables to get for a brake controller. Thanks to her, I was able to get everything hooked up and working within 5 minutes. Great service, great prices, and excellent assistance with technical questions!
by: Gregory04/20/2019
Subaru
This fit perfectly on a Subaru Ascent. It only took about 5 minutes to install. I fed the adapter up the steering column and used command removable velcro hanging strips to install the controller on the small shelf to the left of the steering wheel without any screws. The controller works very well.
by: Donald 10/22/2021
Subaru
Made connection to the wiring in my new Subaru Ascent as easy as could possibly be.
by: Peter03/06/2022
Works like a charm!
by: Monymony06/01/2020
Simple to install on my Subaru Ascent. Took me less then 90 SEC from starting the project to having my brake controller up and running. Works perfectly.
by: Alan07/13/2020
This harness is an easy way to connect the dash unit to the factory harness. it plugs right in to my 2019 Subaru Ascent and is long enough to allow several different placements for the controller. I mounted the controller to the fuse access door as to not damage any part of the dash and avoid all the airbag areas.
by: Dan 09/10/2021
fast shipping
quality parts
by: Jared05/21/2020
2020 Subaru Ascent
Product showed up as promised. Excellent communication from etrailer. Got the Tekonsha P3 brake controller yesterday and installed the same day. Everything works great!
25
52
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Brake Controller Plug Location on my 2019 Subaru AscentThe location to plug the Tekonsha Plug-In Wiring Adapter part # 3062-P is just above the driver's side kick panel just behind the hood release latch mounting block. It will be wrapped in black (most often) tape to keep it clean and free of debris. It will be taped up to another main harness and this is likely causing your issue. Please see the attached photo for the exact location.
view full answer...
- Parts Needed to Install Brake Controller in 2019 Subaru AscentYes, Tekonsha released the part # 3062-P which is a brake controller install harness that fits your 2019 Subaru Ascent and would work well. I attached a picture that shows where you'll find it on your vehicle too. For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle...
view full answer...
- Tekonsha Prodigy P3 Controller for 2019 Subaru AscentFirst off, congratulations on your new vehicle! Now, to answer your questions: One of the great features of this controller is that it will automatically adjust your trailer's braking based on deceleration of your Ascent. Once installed, you do not need to adjust the settings on the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 as long as you leave it plugged in. If you unplug the controller, you'll need to go through the initial set-up once again because it assumes the controller...
view full answer... - Harness To Use Tekonsha P3 On 2020 Subaru AscentThe Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 is a great option for a 2020 Subaru Ascent and it can be used with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3062-P for a plug-in-play install. I have not yet seen a factory brake controller pigtail for the Subaru Ascent but it's unlikely to contain a fuse as fuse protection needs to be close to the battery. It may be a diode which is more common and in which case this harness would have one as...
view full answer... - Where is Brake Controller Port on 2019 Subaru Ascent w/ Tow Package to Install Prodigy P3According to the linked installation instructions of the Tekonsha Plug-In Wiring Adapter # 3062-P, for your 2019 Subaru Ascent with the factory tow package, the brake controller port will indeed be underneath the dash and to the left of the steering column. There is a 4-pin harness there that is taped right to another harness; I have added a photo from the instructions which shows this, and this is what will allow you to plug in the adapter and install the Tekonsha Prodigy P3 Trailer...
view full answer...
- Installing Prodigy P3 and Adapter Plug on a 2019 Subaru AscentAccording to the instructions for the Tekonsha Plug-In Wiring Adapter # 3062-P for your Prodigy P3 # 90195 the plug should be located up under your driver's side dash by the left side kick panel (see attached photo). The wring adapter doesn't come with a fuse as it has a ground wire and the OEM factory tow package wiring should be protected. If you didn't have factory tow package wiring then you need to hardwire the P3 in and you would use a 30A circuit breaker from the battery to the...
view full answer...
- Does 2019 Subaru Ascent Have Brake Controller WiringYour 2019 Subaru Ascent with the factory tow package does have wiring ready for the easy install of a brake controller but it does not have a brake controller. For that the P3 part # 90195 is a really great option. All you need to install it is the part # 3062-P which plugs in under the dash of the vehicle and you'd be set. The Coachman Viking would have trailer brakes which is why a brake controller would what you'd need.
view full answer... - Plug-In Brake Controller for a 2019 Subaru AscentAccording to Tekonsha, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3062-P will fit your 2019 Subaru Ascent and allow you to use the Tekonsha Primus IQ Trailer Brake Controller part # TK90160. The plug is located underneath the dash and left of the steering column, taped to another harness near the emergency brake pedal which you can see in the attached photo.
view full answer...
- Which Brake Controller Install Harness for 2020 Subaru Ascent for Teksonsha Brake ControllerYes, I checked with Tekonsha and the brake controller install harness part # 3062-P has been carried over to the 2020 models of the Subaru Ascent and would be the correct harness you'd need for your Tekonsha Primus IQ # TK90160.
view full answer... - Wiring Adapter Needed To Install Tekonsha Primus IQ On a 2019 Subaru AscentIn order to install the Tekonsha Primus IQ Trailer Brake Controller part # TK90160 on your 2019 Subaru Ascent you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3062-P. The Tekonsha Plug-In Wiring Adapter makes for a plug and play fit so you don't have to worry about connecting wires. In regards to the factory brake controller pigtail you have, I would assume it follows the same industry standard brake controller wire colors but I would not be able to...
view full answer... - Parts Needed to Install Curt Spectrum Trailer Brake Controller on 2020 Subaru AscentSince your 2020 Subaru Ascent is already equipped with a factory 7-way connector, you will not need any additional parts other than the ones included with the Curt Spectrum Brake Controller part # C51170. There isn't a custom wiring adapter available from Curt for your Ascent, so you will need to hardwire the Spectrum controller in order to install it, or you can easily make your own adapter, using part # 3062-P. Basically, you'll cut off the black end of this adapter (the one that matches...
view full answer... - Plug and Play Brake Controller Wiring Harness for 2020 Subaru AscentYes, the same brake controller harness, # 3062-P, that fits the 2019 Subaru Ascent will also fit the 2020 models. I confirmed this with our brake controller manufacturer. This plug-in harness will fit any Tekonsha or Draw-Tite brand brake controllers like the Primus IQ, # TK90160, or the Activator # 5504. I'd go with the Primus IQ, # TK90160, because it is a proportional brake controller which means it will activate the trailer brakes with the same braking intensity as your vehicle....
view full answer... - Parts Needed to Install Redarc Tow Pro Elite in 2020 Subaru AscentAll you need to install the Redarc Tow Pro Elite # RED44FR is the install harness that was custom designed to match the OEM brake controller of your 2020 Subaru Ascent, part # 3062-P. This plugs into the port under your dash for an easy install.
view full answer... - Location of Brake Controller Connector in 2019 Subaru AscentTo install the Redarc Tow-Pro Elite brake controller, part # RED44FR, in your 2019 Subaru Ascent you need to find the white connector with the standard red, white, blue, black wires coming out of it behind a kick panel to the left of the driver. The picture I attached shows the location. Use part # 3062-P to plug into that white connector to install and use the Redarc controller.
view full answer...
- Best Brake Controller for 2022 Subaru Ascent with Factory Tow PackageFor your application I recommend going with the Tekonsha Prodigy iD # TK49VR which will plug into the connector under the dash of your 2022 Subaru Ascent by using the Wiring Adapter # 3062-P. I really like this brake controller for a few reasons; it has a new design which allows it to be installed virtually anywhere, the control know looks like it is OEM and it isn't as big as a standard controller so you're saving on in-cab real-estate, plus the control knob has a small LED screen so...
view full answer... - Parts Needed to Install the Redarc Tow-Pro Elite in a 2022 Subaru Ascent with Factory Tow PackageTo install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR in your 2022 Subaru Ascent you will also need the Tekonsha Plug-In Wiring Adapter # 3062-P. This adapter plugs into the connector located beneath your vehicle's dashboard and left of the steering column, taped to another harness near the emergency brake pedal. There will be a 4-pin connector that mates with the adaptor. The other end will then plug into the Tow-Pro Elite. Providing with a simple installation. To help...
view full answer... - What is Needed to Install Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR 2022 Subaru AscentTo install the Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional # RED44FR on your 2022 Subaru Ascent with factory tow package, you will also need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dual Plug In # 3062-P. The # 3062-P is a plug-and-play wiring adapter and will plug into brake controller port underneath your dash. Then you will just need to mount the Redarc Tow-Pro Elite to complete the installation. I have included the installation...
view full answer... - Parts Needed To Install Redarc Tow-Pro Elite on 2022 Subaru Ascent Without Factory Tow PackageIn order to install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR on your 2022 Subaru Ascent you will need to start with a wiring harness. Luckily for you the Ascent has a 7-way option that does not require the installation of a 4-way first. For this, you will want the Tekonsha OEM Replacement Vehicle Wiring Harness with 7-Way Trailer Connector # 118290. This wiring harness will plug into the connection point behind the rear interior trim panel. Once installed, you will have...
view full answer... - Recommended Brake Controller For A 2019 Subaru AscentWhen it comes to installing a trailer brake controller in your 2019 Subaru Ascent The Redarc Tow-Pro Elite Trailer Brake Controller - 2 Braking Modes - 1 to 3 Axles - Proportional # RED44FR and The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dual Plug In # 3062-P is a great choice for your vehicle. The Redacrc controller's main unit will be set up in an out-of-the-way spot, and the control knob will be set up on your dash which allows for a fast and easy adjustment...
view full answer... - Can Prodigy P3 Brake Controller be Switched Between 2021 Subaru Ascent & 2007 Toyota TacomaYes, you can absolutely switch the Prodigy P3 between both your 2021 Subaru Ascent and 2007 Toyota Tacoma. All you will need are the appropriate wiring harnesses and an extra mounting bracket and you're set! Assuming both your '21 Ascent and '07 Tacoma have the factory tow package, here is exactly what you will need: - Tekonsha Prodigy P3 Trailer Brake Controller # 90195 - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Subaru # 3062-P - Tekonsha Plug-In Wiring Adapter...
view full answer... - How To Install a 7-Way Trailer Wiring Harness On a 2019 Subaru AscentThere are two different 7-way trailer wiring harnesses for a 2019 Subaru Ascent dependent on whether or not you have the factory tow package. If you do have the factory tow package then you should be using the Tekonsha OEM Replacement Vehicle Wiring Harness part # 118290, not the Universal Installation Kit for Trailer Brake Controller part # ETBC7. If you found a plug under the dash for the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3062-P then you have the factory...
view full answer... - Brake Controller that Beats the Prodigy P2/P3 and is More HiddenThe P2 part # 90885 and P3 part # 90195 have long been considered to be the best brake controller you can get due to the advanced inertia sensor and the overall reliability and ease of use. That said there are other brake controllers I would recommend over them now that rival in quality and function but have other benefits while costing currently less like the Tow Pro Liberty # RED24FR which has the added benefit of installing with only a knob that mounts on the dash instead of a bulky...
view full answer... - Adding Trailer Brake Controller and Sway Control to a 2021 Subaru Ascent Towing a Travel TrailerI recommend the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 for your 2021 Subaru Ascent. This brake controller is customizable and proportional. This means that it uses its internal inertia sensor to help adjust your braking for light or severe braking conditions. If your Ascent came with the factory towing package a Tekonsha Plug-In Wiring Adapter # 3062-P will allow you to simply plug in the P3 controller into the factory connector under the dash. Otherwise you will need a...
view full answer... - Where to Connect Red Wire During Installation of RedArc Tow Pro Elite on 2021 Subaru OutbackDuring the installation of the RedArc Tow Pro Elite # RED44FR, the red wire you're referencing goes to the brake light switch on the back of the brake pedal. You will need a circuit tester like the # PTW2993 to confirm which wire corresponds to that wire when the brake pedal is pressed. I've also linked an installation video of a RedArc Tow Pro Elite on an older Subaru but the process and setup behind the pedal should be fairly close.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
John H
Edited by:
Lindsey S
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-496-5010
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.