Adjust your 5/8" fender ropes to the height you want. Also helps keep dock lines out of the way so your boat's deck is clean, safe, and clutter-free. Strap wraps around your rail and secures with the turn buckle.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the tailor-made white tidy ups boat fender adjuster for the large size rails. Now this white final fender adjuster will snap over your large size railing to easily hang your fender from the side of your boat. The line from your fender, we'll go into this adjuster and it locks into place underneath this brass roller. It gives you a nice adjustable locking feature, allows you to move the fender as needed to protect from any size dock or neighboring boat. Basically, when you run your rope up through here, that brass roller will fall down and pinch the rope and hold it into place using the weight of that fender, pulling on the rope. So it will hold it at the position you need.
It's a very simple design. It just quickly snaps onto a large size railing to hold it and adjust the boat fender.This one fits large sized rails. So it will fit rails up to two and a half inches in diameter. It'll hold the rope or a line here up to five eighths inch in diameter. The strap is a nice white color, flexible vinyl construction that will not damage your railing when it's installed.
And just to demonstrate what we're talking about, I happened to pull a rope here. We got a white rope. It's a three-eighths inch diameter rope, and this would be a rope like you'd put onto your fender. The loop then would attach to your fender.The open-end then would run through here. So after you've installed this onto your railing, all you do is lift up on that brass roller, put the open-end underneath it, pull it through and let go of the brass railing and you can see when that brass railing falls down, it'll lock that rope into place and it'll hold the fender at the position you need.
If you need to adjust it again, just pull up on the brass roller. If you want to go higher, pull more rope through there. Let it go, and again, it locks it. If you want to go lower, just pull up on it and let it fall down some. Now, I would recommend when you run your rope through here that you tie a knot on the end here to keep it from fully coming through, but that should do it for the review on the tailor-made white tidy ups boat fender adjuster for the large size rails..
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Adjust your 5/8" fender ropes to the height you want. Also helps keep dock lines out of the way so your boat's deck is clean, safe, and clutter-free. Strap wraps around your rail and secures with the turn buckle.fast service and on time.
quick delivery, great prices!!
Needed to replacce several tidy ups that were broken. They are great. Quick shipment. Thanks
First class— excellent quality
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.