Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver - 2" Ball

Video Transcript for Review of Stealth Hitches Towing Kit Ball Mount Trailer Wiring Hidden Rack Receiver - 391CONVOC5

Hi everybody. Andy here with Etrailer.com and today we're gonna take a look, at this towing kit with ball mount and trailer wiring, for your Stealth Hitches hidden rack receiver. Now this kit is custom fit and designed, for your 2018 to 2019 Subaru Crosstrek, and then your 2020 to 2022 Subaru Crosstrek Hybrid, and excluding hybrid. To confirm that this is going to work for you, take advantage of our vehicle fit guide, here at Etrailer.com. Insert the year, make and model, of your vehicle and our fit guide. We'll let you know if this will work for you, or if we have something comparable that will work for you.

This complete towing kit is going to let you use your Stealth Hitches wrap receiver to tow a small vehicle and on your screen I am including our item number, for that hidden wrap receiver, that this kit is going to work with. And this detachable ball mount is going to lock, into your hitch in place, of your receiver attachment securely attaching, to your hitches cross tube to eliminate rattle and play. The included two inch hitch ball is going to, of course, give you a connection point for your trailer's ball coupler and the maximum gross trailer weight is up to 3,500 pounds. However, this is not rated for weight distribution systems, and the black powder coat finish on this ball mount, and on the included safety chain loops that you see here, are going to give you superior rust protection. Now the rise from the ground to the top of the ball when this is used with that rack receiver, that we looked at just a minute or so ago, the rise is going to be 18 inches.

And again, that's going to be from the ground, all the way up to the top of the ball. And let me go ahead and retrieve my ruler, and go over some other measurements with you. Looking at the overall length. As you can see we are sitting right at about, 13 inches long overall. And then measuring from the center of our peg to the center, of our hitch ball, we are sitting right at 10 inches.

The thickness of our base is about three quarters of an inch and the ball hole diameter is one inch. And as you can see, I do have this hitch ball just kind of loosely mounted in this ball mount. Of course this will be tightened up when you install this, and receive, when you receive this you do wanna just install that ball, but I just kind of have it loosely connected there, just to show you what this is going to look like, with that ball inserted. Now the four-way flat trailer connector, is going to mount to the back of your vehicle, to power your trailer signal lights, by connecting directly to your battery, to avoid overloading your vehicle system. So as you can see, this does come with a included wiring harness, and so this is going to connect directly to your battery, so there's not gonna be any strain, on the electrical system of your vehicle.

So really everything that you're going to need, to get you ready to tow a small trailer. It does include cable ties as well, to kind of cinch up that excess wiring. This does have a limited lifetime warranty, so if you are looking to use your Stealth Hitches, rack receiver to tow a small trailer, this is going to be exactly what you need. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.