Video Transcript for Seaflo Thru-Hull Fitting for Livewells and Bilge Pumps Feature Review

Michael: Hi there. I'm Michael with etrailer.com.Today, we're going to take a quick look at the sea flow through hole drain fitting. This is going to provide an outlet for your LiveWell overflow or an exhaust port for your bilge pump. This will go right through your transom and you can see it's got a nut here so that you can tighten it down against your transom so you get a nice secure fitting there.This is a plastic piece so it's going to resist any damage from chemicals or salt water exposure so it should hold up well for you for a nice long time. You can see it is a nice white color so it should blend in well with your boat.Our inner diameter here is right about one inch as you can see. On the backside, our diameter is right about one inch as well.

So that's the end that's going to go into the tube for your bilge pump or LiveWell overflow. The overall length, I'm going to say it's right at three and a half inches, maybe just slightly over that, but real close to three and a half inches.And overall, I think this is going to be a great option to help clean up any of those ports that you are using to expel water out from the inside of your boat, to make sure that your boat isn't filling up with water. I think this is going to do a good job and last you a nice long time and give you a nice clean look on the outside of your boat as well.So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..