Conveniently control your automatic bilge pump with this switch panel. Choose between 3 settings for automatic, off, or manual functions. Failsafe circuit breaker protects switch from intermittent high current.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at the Seaflo three-position bilge pump panel switch. This switch panel will control any bilge pump equipped with an automatic float switch. This switch gives you an off in the middle here, auto at the top, and then, a manual function. You can see, right now, it's in the off position.
You push the top down, it's automatic. And then, if you go to the bottom and push the manual, you can see on the manual, it won't stay completely on. It has a fail safe spring that'll return the toggle from the manual position to the off position. And that's to protect the switch from intermittent high current. And also, if you notice these two lines right here, those actually light up when it's connected, so when you push the auto, that'll light up to let you know it's on.And then, when you push down, that light will come on, and when you release it, it'll go off.
Over here, it has this built-in 15-amp circuit breaker. To reset it, you just push it to reset it. It does include all the mounting hardware and the wire connectors for installation. A few specs on this. Voltage is 12 and 24 volts DC.
Dimension on this panel, the width of it is right at up to an fifteen sixteenths of an inch. The height on it is right at two and a half inches tall. The total depth from the switch right back here is going to be right at about two and seven sixteenths inches deep. But again, you push that for resetting your circuit breaker, and then, over here on your switch, it's off. Pushed in like that would be on automatic.
The bottom would be on. If you release it, it's off. But that should do it for the review on the Seaflo three-position bilge pump panel switch.
Average Customer Rating: 4.7 out of 5 stars (7 Customer Reviews)
Conveniently control your automatic bilge pump with this switch panel. Choose between 3 settings for automatic, off, or manual functions. Failsafe circuit breaker protects switch from intermittent high current.
It's a nice switch. Has a small LED indicator to confirm the power is on.
Good follow up to send the requested part. Nice equipment.
Good quality materials. Easy to install and adjust to set the best configuration for your boat and trailer.
Thank you for your speedy transaction.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.