Seaflo Thru-Hull Fitting for Livewells and Bilge Pumps - 5/8" Inner Diameter

Video Transcript for Comprehensive Review: Seaflo Thru-Hull Fitting for Livewells and Bilge Pumps

Michael: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the Seaflo Thru-Hull fitting for your live wells and bilges. This is a nice little plastic piece that's going to create a nice looking finish to any of your Thru-Hull outlets for your livewell overflows or exhaust ports for your bilge pumps. This is going to resist damage from chemicals and salt water exposure. So it's going to hold up well for you, do a good job over time.

It is going to install right through your transom, and you can see it is a nice white color. So it should blend in well with your boat. This does have an included nut there that will allow you to tighten that up against your transom. The end here, where you're going to be putting your line in, that's going to be right at five eighths of an inch thick in outer diameter.And then our inner diameter here on the port that's going to be coming out is right at five eighths inner diameter as well. Our outer diameter, it's about one and five eighths of an inch, and this is right at two and seven eighths of an inch long.

So that should do a good job for you to help clean that up. Make it look really nice, give you a solid way of getting all that water out of your boat, whether it's because of rain or waves, whatever you're dealing with, this is going to be a great option to make sure that the inside of your boat is not holding any water. So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..