SeaSucker Cable Anchor for Cable Lock - Window Mounted

See what our Experts say about this SeaSucker Accessories and Parts

• Can Sea Sucker Vacuum Cup Paddleboard Carrier 298-BX1806 Hold 31-Inch-Wide Paddleboard
  Yes, the maximum width of a paddleboard used with the Sea Sucker Vacuum Cup Paddleboard carrier # 298-BX1806 is 31-inches, according to my contact at Sea Sucker. If you wish to add a cable lock like # CAB-10 you can use either their trunk anchor # 298-BA0020 or their window anchor # 298-BA0010.
  view full answer...
• Are the SeaSucker Cable Anchors Compatible With All Vehicles?
  Yes. The SeaSucker Cable Anchor for Cable Locks # 298-BA0020 is compatible with all vehicles with a rear cargo hatch or trunk- so it will work perfectly on your 2017 Mini Cooper S F56. To install this, simply insert the anchor into your trunk seam, shut the trunk, then run your cable lock through the hole in the anchor. If you would rather mount the anchor to your window channel, you can use the SeaSucker Cable Anchor # 298-BA0010. If you need a cable lock to go with your anchors and...
  view full answer...
• Mountain Bike Fork Mount Rack for a Thule X-Sporter
  I have a solution for you, but because of the size of the X-Sporter bars, your options on bike racks are limited that are not channel mounts. The best option for you is to use the SeaSucker Talon rack, part # 298-BT1004. This rack mounts to any solid, nonporous roof surface with strong vacuum cups, letting you mount the rack easily to whatever position you want. In your case, this can be the cab of the truck or on the top of the RTT. I've included a few videos of this series of racks...
  view full answer...
  
• What Roof Rack Fits My 2022 Mercedes Sprinter 2500 that Does Not Require Removing the Headliner?
  I have a great solution for you. Even though all of our traditional roof racks for your 2022 Mercedes Sprinter do require you to remove the headliner for installation, I know a create way to solve the issue. For that route, I recommend the SeaSucker Monkey Bars # 298-SX6000B. The Monkey Bars come with an impressive 150 pounds of weight capacity and involve the quickest and easiest installation and removal process out of all of our roof racks. For the security of the rack, I recommend the...
  view full answer...
• Can SeaSucker Mini Bomber Bike Rack Rear Strap Fit 3 Inch Tires
  You will not need any type of adapter; your 3 inch tires are 100 percent compatible with the SeaSucker bike rack you referenced: - SeaSucker Mini Bomber Roof 2 Bike Rack - Fork Mount # 298-BM2006 The strap for the rear wheel vacuum cup of the the Mini Bomber will easily secure that size tire so you can use it to transport your bike. The only other thing I recommend is using a cable lock and anchors to secure the rack to your car, which you can do with the Cable Lock # e98891 and SeaSucker...
  view full answer...
• Trunk Mount Bike Carrier for a 2019 Toyota RAV4 That Wont Damage Rear Spoiler
  We do have a solution for you, but at this time none of our "traditional" bike rack manufacturers have a trunk mount fit for your 2019 Toyota RAV4. Out of the available selection I recommend going with the SeaSucker Hornet Rear Window Bike Rack # 298-BH1302. This mounts via vacuum cups which have a 120 lb per cup weight rating. It can hold 1 bike with a max weight of 35 lbs and is made right here in the USA. It includes a cam-buckle strap that loops around the your handlebar stem and...
  view full answer...
• Is the SeaSucker Komodo Trunk Bike Rack Compatible with a 2016 Mercedes-Benz SLC AMG
  Yes, the SeaSucker Komodo Trunk Bike Rack # 298-BK1910-BK is confirmed to fit your 2016 Mercedes-Benz SLC AMG as the vacuum cups are compatible with a roof, trunk, or window glass. Just be sure the surface is clean before installing it. To add some security to this trunk mount bike rack you can add a cable anchor like part # 298-BA0020 or # 298-BA0010 along with a cable lock like part # SA981. We also have the SeaSucker Hogg # 298-BA1580 you can use to carry your front tire. I have attached...
  view full answer...
  
• Recommended Bike Carrier for 2017 BMW 640d Gran Coupe
  We currently only carry one bike rack that is a confirmed fit for your 2017 BMW 640d Gran Coupe. It is the SeaSucker Komodo Trunk Bike Rack - Fork Mount - Vacuum Cup Mounted - Black # 298-BK1910-BK and is also available in other colors. The vacuum cups on this rack hold 210 lbs each and the carrier weighs just 13 lbs. I've linked the page to all your options as this rack comes in silver, aqua blue, and gold in addition to black. You may also be interested in the SeaSucker Hogg - Bike...
  view full answer...
• Low Profile Rooftop Ski Box for a 2017 Honda Pilot
  The lowest rails available for your 2017 Honda Pilot EX-L are the Rhino Rack ROC25, part # RR73XR, an all in one kit that sits around 4 inches tall. Combined with the Yakima SkyBox Lo, you'll be at around 15-1/2 inches tall. This can vary a little depending on the exact curve of your roof and how low the roof rack kit sits below the top plane of your roof.
  view full answer...
• Will the SeaSucker Mini Bomber Carry Tandem Bikes?
  I checked with SeaSucker and they confirmed that you will be able to use the Mini Bomber # 298-BM2006 to carry tandem bikes provided that they are under 45-lbs each/90-lbs total -which yours are. You won't want to put the suction cups on the sunroof portion of your vehicle because the 2 bikes will likely exceed the safe limit that the glass can hold, but you will be able to mount the cups in front of, or behind the sunroof depending on how much space you need. To keep your bikes secure...
  view full answer...
• Can SeaSucker Board Carrier Be Mounted to Side of Sprinter Van?
  The Seasucker brand which includes the SeaSucker Board Carrier # 298-BX1806 is awesome because they're designed for extreme versatility and mounting equipment without a roof rack or hitch. My friends at SeaSucker confirm that it can absolutely be mounted to the side of your Sprinter van. I have some extra tips when using this carrier. First to make sure you're within the weight capacity. While the SeaSucker Board Carrier # 298-BX1806 can hold up to 100 lb on the roof of your vehicle where...
  view full answer...
• Carrying a 12 Foot Stand Up Paddleboard with a 2018 Ford F-150 Raptor
  I have a possible solution for you, but unfortunately at this time there aren't any roof rack fits available for the 2018 Ford F-150 Raptor. I would normally recommend a ladder rack, however there are no good fits for your planned tonneau cover addition. Since you're looking for 100% quick removal, your hands down best option is the SeaSucker Surfboard Carrier, part # 298-BX1806. This innovative rack mounts using extremely strong vacuum cups to the roof of your vehicle, completely bypassing...
  view full answer...
• How to Carry 2-Bikes on Flat Towed 2015 Fiat 500
  I do have a solution for you, but it will involve a roof mount option as opposed to hitch mount since there aren't any hitch mount bike racks that are compatible with a flat-towed vehicle with a Class I hitch receiver. For your application I recommend the SeaSucker Mini Bomber # 298-BM2006 because it eliminates the need to purchase both a roof rack setup and a roof mount bike rack; this is essentially a 2-in-1 deal. This does require you to remove the front wheels of your bikes so you'll...
  view full answer...
• Can I Carry a Moken 12.5 Angler Kayak using SeaSucker MonkeyBars on 2018 Chevy Equinox?
  Yes, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B will work on your 2018 Chevy Equinox to carry your FeelFree Moken 12.5 kayak. You may want to add the crossbar pads # 298-SA1022 for some added protection and cushioning for your kayak, as well as the Cam Buckle Straps # 298-SA0010 to tie down the kayak to the bars. If you're at all worried about security and intend on leaving your kayak unattended when attached to your vehicle I recommend a cable lock like the Fulton 15 ft # FCLK150100...
  view full answer...
• Fit of the SeaSucker Talon on a 2018 Audi A5 Sportback
  The SeaSucker Talon, part # 298-BT1004 will be a compatible fit with the 2018 Audi A5 SportBack, though you may need to mount the rear tire on the rear glass of the vehicle depending on the bike's wheelbase. I recommend adding a few things for use with the SeaSucker Talon for ease of use and added security. For your wheel, you'll want to purchase either the Hogg, part # 298-BA1580 or Flight Deck, part # 298-BV1022. These will let you store a quick release front wheel outside of the vehicle...
  view full answer...
• What Low-Profile Roof Rack System will Work with My 2016 Ford Explorer with a Bare Roof?
  I have a solution for you. The only roof rack system we have available that will work with your 2016 Ford Explorer's bare roof is the Seasucker Monkey Bars - 48" # 298-SX6000B. The height of the Seasucker Monkey Bars is just under 4-1/2 inches from the top of the roof to the top of the crossbars. One great feature is the mounting vacuum cups. The vacuum cups secure tightly to the roof's vehicle and gives your vehicle 150 pounds of maximum carrying capacity. The Monkey Bars has the easiest...
  view full answer...
• SeaSucker Vacuum Cup Strength Rating and Compatibility
  I don't have any information on the VacuRack, but the Seasucker is a great product. The SeaSucker Surfboard Carrier - Vacuum Cup Mounted - 1 Surfboard or Paddleboard # 298-BX1806 will fit on your 2014 VW Beetle and has 6 vacuum cups. Each cup on any of their carriers is rated for 210 lbs and has been tested for speeds up to 140 mph. This particular product weighs just 12 lbs and will absolutely hold your board safely to your vehicle. For added security you can add the SeaSucker Cable...
  view full answer...
• Bike Rack for a 2017 Ford Escape Titanium and a 2012 Ford Explorer
  You have a lot of great options for a 2017 Ford Escape Titanium, but I have two specific recommendations that also work with your 2012 Ford Explorer. The first is a Yakima FullBack 3 Bike Rack, part # Y02633 . This is a fully featured rack with integrated anti-sway bike holders and integrated bike and rack locks for added security. This rack can hold 3 bikes total safely away from the vehicle so that you don't have to worry about potential damage from swaying bikes. This is a confirmed...
  view full answer...
• SeaSucker Vacuum Cup Mounting Capacity, Function, and Fit
  The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - Folding - 48" Long # 298-SX6000B does simply use the vacuum cups as the sole securing factor. Each vacuum cup is rated for 210 lbs pull strength, so this system is claiming 1,200 lbs of pull strength and they have been tested with cargo at highway speeds without issue. The strength is really incredible...I've attached a video to assist. For increased security and theft deterring, they recommend the window mounted cable anchor...
  view full answer...
• Compatibility of SeaSucker Roof Rack for Surf Board at 70 MPH
  The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B you asked about are definitely rated for speeds of 70 mph in good driving conditions. Each of the 6 vacuum cups is rated for a pull strength of 210 lbs. This rack on your vehicle is rated for up to 150 lbs at those highway speeds, so you will not have any issue as long as your board is secured to the rack well. I recommend using the SUP and Surfboard Pads for SeaSucker Monkey Bars - 19-1/2" Long - Qty 2...
  view full answer...
• What Do You Recommend for Transporting a Surfboard on My 2022 Nissan Frontier?
  I have a great solution for you to transport your surfboard. On your bare-roof 2022 Nissan Frontier, I confirmed with all of our roof rack manufacturers that they currently have not manufactured a traditional roof rack that is confirmed to fit your cab. With that being said, a great alternative is the SeaSucker Surfboard Carrier - 2 Surfboards or SUPs # 298-BX1806. The SeaSucker surfboard carrier and involves the fastest/easiest installation/removal process we carry here at etrailer....
  view full answer...
• Roof Rack Needed for a 2013 Kia Forte Koup
  We actually do have a fit for your 2013 Kia Forte Koup from SeaSucker. This roof rack option consists of the 48" long round bars and vacuum cups as part # 298-SX6000B. This rack has a weight capacity of 150 lbs and can be adjusted to different length crossbar spreads. You do want to verify that your Kia Forte Koup can accommodate the 150 lb capacity though. To add locks to this roof rack you can use the Cable Anchor # 298-BA0010 and a cable lock like part # e98891. I have attached a...
  view full answer...
• Does SeaSucker Roof Rack # 298-SX6000B Fit Both 2012 Toyota Prius C and 2019 Honda Ridgeline
  The really great thing about the SeaSucker roof rack part # 298-SX6000B is how universal it is since it uses the vacuum cups for attachment. What that means is that yes it does fit both your 2012 Toyota Prius c and your 2019 Honda Ridgeline. To add security to this setup for theft-deterrence, the best way is to use the etrailer cable lock # e98891 along with the SeaSucker window anchor # 298-BA0010.
  view full answer...
• Recommended Roof Rack for 2019 Smart fortwo
  The only roof rack confirmed to fit your 2019 Smart fortwo that we carry is the SeaSucker roof rack # 298-SX6000B that uses vacuum cups for the hold. These cups are very strong with a 210 lb pull strength for each cup. I've attached some videos to assist. You may be interested in the cable anchor # 298-BA0010 for increased security when using this system. It will allow you to use any cable lock like # e98891 to deter theft.
  view full answer...

Do you have a question about this Accessories and Part?