Replacement Mounting Brackets for Rola Roof Mounted Cargo Basket
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today we're going to take a look at this replacement Rola roof mount bracket assembly for the Rola roof mounted cargo carrier. It's for a quantity of one assembly. Now, this bracket assembly is used to hold the Rola roof mounted cargo carrier to the roof rack crossbars on your vehicle. And, again, this is for just one bracket assembly.
It will require four of these bracket assemblies to hold the complete cargo carrier to your roof rack. This is designed to work with the Rola rooftop mounted cargo carrier part number 59504 and part number 59504-EXT. It will include all the parts laid out here on the table. The mounting bracket itself, the spacer block, the U-bolt, the two plastic knobs, and a nice set of instructions.Basically, when you go to install this, you'll take this plastic spacer block right here and put that on top of the roof rack crossbar. And the block will sit between the crossbars of the roof rack.
And basically the bars of the roof rack will go right into these two end of the spacer box right here. So this goes between the crossbars of the roof rack. Once that's through there, you take your mounting bracket, put it over the spacer block, and you'll see on top here the square holes on the mounting bracket engage the squares on the spacer block. And then you'll take your U-bolt, and the U-bolt you notice does have this nice plastic coating on it. And this U-bolt will go around your crossbar and then come up into these end slots just like that.
And then once they come through there, you just take your plastic knobs, go ahead and start them on those threaded ends of the-U bolt, one on each side. Oops.And once they get started, you just go ahead and tighten those down. You want to tighten them firmly and evenly. Make sure you do them equally on both sides. And then once you get it tightened down, the cargo carrier should not move on the crossbars when these knobs are tightened down properly.
So basically what will be happening is it'll be like this around your crossbar, holding your bars right here of your roof rack in position. And, again, it comes with a nice set of instructions.But that should do it for the review on the replacement Rola roof Mount bracket assembly for the Rola roof mounted cargo carrier.
Average Customer Rating: 4.9 out of 5 stars (89 Customer Reviews)
Great replacement bracket for my Curt roof rack basket. Curt does not sell replacement parts for their baskets and these fit perfect. I also like the fact these are recessed down a little so the bolts don’t protrude above the basket bars like the old Curt brackets did. 665763
Perfect! These ROLA brackets are better than the originals of the Bison 64", Arksen 64", and Cabela's trailgear 2 Roof Racks, which are all the same type but different names. I added two extensions and two roof rails to my GMC Yukon Xl. Extension from Cabelas. Pictures on SUV soon! THANKS E-TRAILER 415109
Well made, larger thread size, thumb wheels have treaded insert instead of just a nut inside, design angles increase ease of use 918343
excellent product and timely delivery -- just what i needed 908006
Perfect fit 898699
Solid product. I used it to Secure my MOAB to a GMC Yukon XL. I made some spacers to account for a cross bar vs Rola height difference. Everything was a tight fit and seems to work very well. Disclaimer: Not a manufacturer approved setup. This is something I did to meet my needs. Please be aware that this is not a recommendation or endorsement. Do at your own risk. Thanks for reading about my project. 876555
I know the product is great the shipping was awesome the way u all show each step of the delivery was something to enjoy keep up the great work..... 830548
I took a gamble on these because they don't have the measurements for them online. I wish they did but my gamble paid off them came in a day earlier then I paid for and they were each individually packaged! Great service and great product! 785283
Product is attachments I misplaced. Shame on me. I couldn’t find what I needed. Called in and received excellent service. I haven’t opened the box but have little I received necessary items. 783186
First time doing business with etrailer.com but would not hesitate to use them again. Effective communicators and product arrived on time as promised. 776764
worked great. Didn’t buy all 4 and wish I had. Cost increased by $4 each. 770223
These are exactly what I was looking for to replace the older, broken and lost clamps for my Rola roof rack. Even the economy shipping option was super fast and the parts were packed well. As always thank you, you guys are great! 765052
Nicely packaged and delivered as promis ed 764194
This is such a nice quality bracket then the one that came with my cargo basket. Quick shipping also. Very happy with the product 736366
Worked great. I added a second set of cross beams to my factory rack for more strength. I ordered a set of these to distribute the weight. Arrived on time and worked just fine. 730518
Worked great for the roof rack that I lost a few parts from. 725267
Have not used roof rack clamp yet but it looks to be of good quality. Product arrived promptly and I'm very satisfied with customer service and the follow up inquiry. I will be a repeat customer. Thanks. 705362
Super fast delivery of the correct part at a good price for the product and shipping. 698595
Super Fast Shipping... Great Communication... RECOMMEND to Anyone..... 698449
Purchased Rolla Roof rack mounting bracket replacements for another brand of roof rack that they happen to work with. Well-made brackets and a better design than the ones I'm replacing. 683642
Fit well 681548
This was a tough to find part. Great customer service. 655105
Lost the original of these from my roof rack and I read somewhere that these would fit. Took some measurements and a chance on them and they fit better than the OEM ones and were much better quality. 647873
I had my original set for about 6 years. Great product had to buy a new set last year cause I took the rack off and misplaced one. These have been on for a year now and still holding up as good as the original set. 639500
showed up on time and as described. Would use again for sure. 616876
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.