Replacement Passenger Side Arm Assembly for Roadmaster Blackhawk 2 All-Terrain Tow Bar

Video Transcript for Review of Roadmaster Tow Bar Parts - Replacement BlackHawk Arm Assembly - RM-910021-97

Ellen: Hey everyone. I'm Ellen here etrailer.com. Today we're taking a look at the replacement passenger side arm assembly for the RoadMaster Blackhawk 2 All Terrain tow bar. This is a direct replacement from RoadMaster for the one side of your Blackhawk tow bar. So instead of having to invest in a whole new tow bar, you can just replace that one side if it got damaged or bent somewhere along the way. It's going to be a lot more economical version to get everything back to factory.

So it has the welded on channels so we can run our safety cables and our wiring through there. We'll have the latch to release any pressure whenever we go to unhook so we don't have to worry about it getting bound up. The inner arm should slide easily in and out so we can make that adjustment. And we'll also have the half inch pin to attach to the attachment point for our base plate.So you might have to reuse some of the hardware from your original Blackhawk, including that pivot pin and your attachment to the base plate. There are a couple of different options here so I think that's why they probably don't give you that piece, since it might be different depending on what kind of base plate you have.

Now, this is going to be for the passenger side inner and outer arm assembly. And that Blackhawk 2 All Terrain tow bar part number is RM-422. You can find that here at etrailer.com along with a lot of other replacement parts for the Blackhawk and other RoadMaster accessories. This is made in the USA. Features all the same things, will have the same powder coat on the outside so you don't have to worry about this rusting or corroding, but just gets you back out to flat towing your vehicle with ease.

That's going to do it for our look at the replacement passenger side arm assembly for the RoadMaster Blackhawk 2 All Terrain tow bar.