Roadmaster High Low Adapter for Tow Bars - 2-1/2" Hitches - 4" Rise/Drop - 10K GTW

See what our Experts say about this Roadmaster Hitch Adapters

• What Size Hitch Opening Does Roadmaster High Low Adapter for Tow Bars # RM-058-4 Provide
  The Roadmaster High Low Adapter for Tow Bars # RM-058-4 that you referenced is what you are looking for as it fits into a 2-1/2 inch hitch, provides a 2 inch hitch for your bike rack, and can drop 4 inches.
  view full answer...
• Recommended Tow Bar Adapter with 6" Rise for 2-1/2" Hitch and Tow Bar with 2" Shank
  I may have a solution for you, but we do not have a 2-1/2" Rise/Drop adapter for flat towing with a 6" rise/drop. Since you've got about 3" up or down to work with when it comes to how level to the ground your tow bar must be, you can likely use the Roadmaster High Low Adapter for Tow Bars - 2-1/2" Hitches - 4" Rise/Drop - 10K GTW # RM-058-4. This adapter has a 4" rise/drop and would still likely keep you within the recommended 3" flexibility you have from completely level when it comes...
  view full answer...
• Hitch Extension Recommendation for Clearing Spare Tire of 2012 Jeep Wrangler with Bike Rack
  Since your 2012 Jeep Wrangler would have a 2 inch hitch the adapter you'd want is the Roadmaster part # RM-070 instead as the one you mentioned is for a 2-1/2 inch trailer hitch. Then for a locking anti-rattle device we have the Anti-Rattle Device part # 63232 which would work well. It's a lock that holds the shank of the adapter tight to the hitch tube to prevent movement.
  view full answer...
• Availability of Dual Hitch Receiver Adapter for 2-1/2" Trailer Hitch Receiver
  I believe you are looking for a dual hitch receiver adapter like the Roadmaster # RM-077-6 that's directly compatible with the 2-1/2" receiver on your Ford F-250. While there isn't an adapter like this available that's designed for 2-1/2" receivers, you can still use a 2" model like this one by simply adding a reducer sleeve like # C45405 to your truck's receiver. This will reduce the 2-1/2" receiver to a 2" opening so that this and other 2" accessories can be used. I have attached a...
  view full answer...
• 8 inch High Low Adapter Solution that Can Fit 2-1/2 inch Hitch Size
  We used to carry that adapter but Roadmaster stopped offering it to us. Best solution would be the version that fits a 2 inch hitch part # RM-048-8 with a 2 inch to 2-1/2 inch adapter part # C45405.
  view full answer...
• Recommended Ball Mount with 4" Drop for a 2-1/2 Inch Trailer Hitch Receiver
  The Roadmaster High-Low Adapter part # RM-058-4 is designed for flat towing applications and is not rated for the tongue weight associated with straight pull towing. If you need a ball mount with a 4" drop then I recommending using the Curt Forged Ball Mount part # C45458. As long as you have a 2-1/2" trailer hitch receiver on your 2015 Chevrolet Silverado 2500 then this ball mount will work well for you. If you have a standard 2" trailer hitch receiver then you will want to use the Curt...
  view full answer...
• Adapter Needed With A BulletProof Hitches Ball Mount To Level The Trailer
  The Roadmaster High Low Adapter for Tow Bars # RM-058-4 is designed specifically for flat towing so it wouldn't be compatible with what you're trying to do. You would instead either need to get a ball mount with a larger drop or use a stacked receiver like the Gen-Y # 325-GH-313. This specific stacked receiver offers up to 5" of rise or drop and has a 10k capacity.
  view full answer...
• Can I Pull A Travel Trailer With The Roadmaster High Low Adapter RM-058-4?
  The Roadmaster High Low Adapter for Tow Bars - 2-1/2" Hitches # RM-058-4 is only made for flat towing because flat towing does not put much stress or tongue weight on the hitch. Whereas with trailer towing, there is always some stress and tongue weight put on the hitch and adapter. While they may work, as you have seen people do this, I still do not recommend using it in that manner. Instead, I would just use a drop hitch to accomplish this. Since your vehicle has a 2-1/2" receiver opening,...
  view full answer...
• Drop Shank Adapter For Carrying A Black Widow Motorcycle Carrier Lower On Vehicle For Easier Loading
  I have a recommendation as the Roadmaster High Low Adapter # RM-058-4 is only designed to be used with tow bars and not a motorcycle carrier. The Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-303 gives you 3 stacked receivers. This will give you different options on how much you want to lower your carrier. You can place it level with your receiver, 2-1/2" or 5" of drop. This adapter allows for 1,500lbs of tongue weight and will be able to handle your Black Widow motorcycle...
  view full answer...
  
• Parts Needed to Use Equal-i-zer Weight Distribution System on 2-1/2" Receiver of 2021 Silverado 2500
  I have a solution for you, but you can't use the Roadmaster # RM-058-4 to tow a trailer; this high/low adapter is only suited for flat towing where there is not any tongue weight. Instead you can use a hitch reducer like the Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long # 325-GH-007 to make your 2-1/2" receiver on your 2021 Chevy Silverado 2500 into a 2" receiver that will work with your existing weight distribution hitch. You could also get a completely different shank that...
  view full answer...
• Complete Flat Towing Setup For A 2020 Chevrolet Silverado 1500
  For your 2020 Chevrolet Silverado 1500, I recommend the Deka Lead Quick-Disconnect Battery Terminal # DW05312. This will allow you to quickly disconnect the battery leads through use of a hand knob. If you're interested in what you need for a complete flat towing setup, you'll also need: -A base plate # RM-523199-5. -A tow bar # RM-676. -A braking system # DM26VR. -Tow bar wiring # RM-154. and a high low adapter # RM-058-4. You'll want to double check what kind of high-low adapter...
  view full answer...
• Recommendations for Flat Towing a 2018 GMC Sierra 1500
  Your 2018 GMC Sierra 1500 SLT is capable of being flat towed. It will require a few things to be added. The first is the Base Plate # RM-3177-3. This will replace the tow hooks that are on the front of the Sierra currently. I recommend this as its a direct connect base plate that doesn't require use of a cross bar. That means less parts to connect and a simpler hookup every time. You will want to measure the height of your current tow hooks and compare that with the motorhome's trailer...
  view full answer...
• Dingy Towing for 2017/2018 Toyota Corolla iM
  The 2017 and 2018 Toyota Corolla IM are both capable of being flat towed if equipped with a manual transmission. If they have an automatic it will have to be dolly or trailer towed. For a Tow dolly I recommend the Roadmaster Tow Dolly with Electric Brakes # RM-2050-1. For Flat towing it will require a few things to be added. The first is the Base Plate # RM-521195-5. I recommend this as its a direct connect base plate that doesn't require use of a cross bar. That means less parts to connect...
  view full answer...
• Flat Towing a 2021 Chevrolet Colorado With a Tiffan Wayfarer Parts Recomendations
  The Roadmaster Direct-Connect Base Plate Kit # RM37VR will reuse the manufacturer hardware on your 2021 Chevrolet Colorado 4WD with neutral Transfer case. It does not require you to cut or grind on the frame like the Demco and etrailer options. This is why I recommend the Roadmaster over the others. You will want to measure the height of your current tow hooks and compare that with the motorhome's trailer hitch receiver height. I always recommend doing this ahead of time so that when you're...
  view full answer...
• Recommended Blue Ox Base Plate Kit for a 2023 Ford Bronco
  For a Blue Ox compatible base plate kit that works with your 2023 Ford Bronco, you will need the Blue Ox Base Plate Kit item # BLU23XR. This kit is custom fit and comes with everything needed to install it on your Bronco. These attach in the same place where your recovery hooks are located. The base plate replaces the recovery points which are not rated to be used for flat towing. I have attached a picture below so you can see what they look like installed. The tow bar needs to be within...
  view full answer...
  
• Recommended Hitch Reducer from 2-1/2 Inch Hitch to 2 Inch with 5 or 6 Inch Drop for 2016 Ram 2500
  A high-low adapter like the Roadmaster High Low Adapter for Tow Bars - 2-1/2" Hitches - 4" Rise/Drop - 10K GTW # RM-058-4 is designed for use when flat towing which is pulling a vehicle behind a motorhome. The reason an adapter is needed is because tow bars that connect the vehicles need to be within 3 inches of level for safety. I've attached an article to assist. It sounds like you are looking for something for the back of your truck that allows for a drop for towing or accessories....
  view full answer...

Do you have a question about this Hitch Adapter?