Custom outboard brackets dramatically reduce the amount of drilling and time required to install your fifth-wheel trailer hitch. Hardware included. Extended-length base rails (RP30153) sold separately.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to take a look at the Reese quick install custom outboard brackets for fifth wheel trailer hitches. Now, this is a custom fit part. It is designed to fit a 2014 and newer Dodge Ram and Ram 2500 short bed and long bed trucks without the factory rail kit, and on a custom fit part, I always like to recommend for you to go to our website, use our fit guide, put in your year, model, vehicle, and it will show if this will work for your application.Now, these installation brackets will mount beneath your truck bed. They provide you attachment points for your fifth wheel rails. Now, these do use the extended length base rails, part number RP30153, that we do sell separately on our website. The rails are designed to sit in the truck bed, and they allow the installation of your fifth wheel trailer hitch to your truck.Now, these are custom outboard brackets so they mount to existing holes in your vehicle's frame.
This will minimize drilling and measuring, and it cuts down your installation time by more than half compared with the universal bracket systems.The hardware for installing these brackets to the frame is all included with a nice set of detailed instructions, and these are a sturdy, black powder coated steel to help resist corrosion. That should do it for the review on the Reese quick install custom outboard brackets for fifth wheel trailer hitches.
Average Customer Rating: 4.8 out of 5 stars (481 Customer Reviews)
Custom outboard brackets dramatically reduce the amount of drilling and time required to install your fifth-wheel trailer hitch. Hardware included. Extended-length base rails (RP30153) sold separately.Seems quite robust and able to handle the weight of a 5th wheel. Fits my long bed, crew cab, 2017 Ram 2500 and the 48" hitch rails as promised. Installation was straight forward, although working around the trucks fuel tank and wiring for the front left bracket was a bit of a pain. Was able to access all nuts for the carriage bolts through the wheel well by removing the two screws that attach the wheel well liner to the frame.
I would recommend grinding a notch in the starting threads of the bolts that go into the truck frame to clean out any dirt, debris, or undercoating to make installing them easier.
Only complaint is that the included extra long bolts are hex head rather than carriage bolts that would match the others that are visible from inside the bed.
Great product & easy install!
I love E-trailer. Always have what I need and fast service.
Review from a similar Quick-Install in Accessories and Parts
Upgraded my truck to a 2019 F250 Superduty. Received my new rail kit and mounting brackets. Fits perfect!
Review from a similar Quick-Install in Accessories and Parts
Five hours to install; which included a half hour searching for the key to the padlock on my spare. E-Trailer linked me to an installation video which really helped. I took my time and measured three times before I drilled the bed. Installation is a lot easier with someone to hold the bolts from the top. I fabricated mounting brackets on my last truck, but these were worth the money and I didn't have to drill the frame! Good design and straight-forward installation. My only issue was the video didn't show one bolt install that secured the driver's side rear bracket to the bottom of the frame. I was going off the video only and wasn't using the written instructions. Make sure you go step by step using both. Also, some parts are clearly for a different application so there will be a few parts left over. My experience with e-trailer was awesome.
Review from a similar Quick-Install in Accessories and Parts
Very happy how soon the product I ordered was at my door step. 3 days after I ordered it. Put the base to my 5th wheel on my 2017 250 diesel sd took me around 5 hrs, would have been faster with 2 people. The base fit my husky 16k prefect when I done torquing all the bolts. Going to use this hitch to pull my 29.5 Durango EZ 1500.
Review from a similar Quick-Install in Accessories and Parts
Hi, George. Thanks for your email. I bought the frame rails to marry up with my Reese hitch and I wasn't disappointed. It installed on my 2003 f250 perfectly and hooked up to the 5th wheel without a problem.
Review from a similar Quick-Install in Accessories and Parts
They fit truck just like they were supposed too. Couple hr install with having to remove spare tire and heat shields to get access to bolt locations. Been supporting fifth wheel through thousands of miles. Thanks for helping me find right product for my truck!
Review from a similar Quick-Install in Accessories and Parts
etrailer makes shopping for my towing needs easy. Thank you.
Review from a similar Quick-Install in Accessories and Parts
We ordered a bracket kit for our new 2017 F350. It was needed to install our Reese fifth wheel. which we use to pull our RV. Product was on back order by manufacturer, however Delisa at Etrailer diligently kept us very informed with updates & shipping status. My husband & son were able to install in a couple of hours. Looks great, outstanding craftsmanship & over exceeded our expectations! We would highly recommend!!!!!
Review from a similar Quick-Install in Accessories and Parts
The brackets arrived in a timely manner. etrailer had a short video which assured potential customers that the brackets would bolt on to my year Toyota but because I have an 8-ft bed and was reusing my existing hitch and rails, I still needed assurance the brackets would work for me. I corresponded by e-mail with etrailer on this question. The etrailer representative I was in contact with requested additional information about my specific hitch and rails which I provided and etrailer confirmed the brackets would work for me. This all happened in a matter of hours. etrailer gave very prompt, accurate service. I attached the brackets, both front and back, and followed the instructions on where to drill through the bed for the rearward brackets and the drill holes in the bed were aligned perfectly with my old rails. The same held true for the front brackets...although I had not cinched them down as they are somewhat (1/2 inch perhaps) moveable. I installed both rails with the hitch in place and torqued the rails down. then torqued the front brackets down. Clearances due to the frame members prevent getting a torque wrench on the front bracket bolts so I just tightened them as much as possible. One person can install the brackets to the frame. It takes two persons to install and tighten the rail bolts. All in all, service was good and the product was good.
Review from a similar Quick-Install in Accessories and Parts
Bought this kit for my 2022 Ram 3500 long bed. This is kit fit perfect. Driver side you had to move wiring harness out of the way. Just take your time and it will go exactly as advertised. Great product. Want to thank Rodney for finding the right fit for my vehicle.
Review from a similar Quick-Install in Accessories and Parts
This was an excellent product. I have put one in about 15 years ago that I bought from etrailer. The only difference this time was I had to cut out the heat shield on the passenger side above the exhaust. There was just no other way to do it. There was no way to bend it enough to get a wrench on the nuts. It took about 4.5 hours working by myself.
Review from a similar Quick-Install in Accessories and Parts
Worked great and easy install for fifth wheel.
Review from a similar Quick-Install in Accessories and Parts
The kit arrived within a few days-very happy about that. very easy to install. the directions were clear and pictures good. I went to the trouble of using a sharpie to mark the part numbers on everything before I started just to keep to all straight.
I would note that on the 2017 F350 diesel the only problem bolt was on the driver side inline with the DEF tank. long skinny arms with flexible wrist is ideal (not what I have). I would also suggest taping the shims onto the outboard frame brackets to save yourself some frustrations. otherwise they are difficult to get and keep in place, especially on the driver side.
the two nuts that go inside the frame tube come on/with a nice handle although a bit light on the wield. here again save yourself and tape the shims on before you try to insert two things into that hole, align and fasten the bolt-by yourself. I used an extension with wobble head and socket to turn the bolt while holding the nut "assembly" in place.
I did remove the rear wheels and fender well liner-a must.
Lastly, great customer service on the phone. Pleasant and patient answering questions.
Wayde C - Montana
Review from a similar Quick-Install in Accessories and Parts
Very easy to install. Measure twice, drill once. I used every piece of galvanic corrosion tape to protect the aluminum bed in the kit, probably could have used a little more. Even though I painted the edge of the holes after drilling, maybe some sort of insulator could be used there also.
Review from a similar Quick-Install in Accessories and Parts
Easy but time consuming installation.
Review from a similar Quick-Install in Accessories and Parts
Great service, the items ordered were exactly what we need to install the B&W 16K Patriot 5th wheel. B&W did not have a mounting kit to fit the 2021 Tundra.
Review from a similar Quick-Install in Accessories and Parts
Shiane was amazing to deal with. Very professional and kind. I highly recommend etrailer, they are one of the last customer service oriented companies.
Review from a similar Quick-Install in Accessories and Parts
Installing 2017 5th wheel brackets and rails . Thankyou for your service in sending me the right parts for my F250 . Took about 4 hrs to install and all holes were perfect in the side brackets . Just had to drill for the rail. I’d recommend your service...
Review from a similar Quick-Install in Accessories and Parts
It came in short the spacers for the truck bed
Review from a similar Quick-Install in Accessories and Parts
Used it 3 times so far, does what it’s supposed to, the brackets fit the frame very good. Very happy with the setup.
Review from a similar Quick-Install in Accessories and Parts
I installed the hitch and brackets myself and am very satisfied with the bracket kit. I’ve towed my fifth wheel about 6 k during the past year and am very satisfied. The instructions were clear and easy to follow.
Review from a similar Quick-Install in Accessories and Parts
It worked very well. I used it on a 1990 Chevy K2500, I believe it was for a later application but I drilled holes in the truck frame to match the brackets and it worked great. Thank you, Joe.
Review from a similar Quick-Install in Accessories and Parts
Perfect, video was a game saver!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.