Accessories and Parts

/

Reese

/

Weight Distribution

/

Shanks

/

Fits 2-1/2 Inch Hitch

/

Trunnion - 5-3/4 In Drop

Reese Titan Weight Dist Shank - Trunnion Only - 5-3/4" Drop, 8-1/4" Rise - 1,700 lbs TW

Reese Titan Weight Dist Shank - Trunnion Only - 5-3/4" Drop, 8-1/4" Rise - 1,700 lbs TW

Item # RP54977

lowest price pledge

Retail:$246.08

Our Price: $115.78

You Save: $130.30
Accessories and Parts

This item qualifies for Free Shipping

Shipping Weight: 27 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
RP54977 - 1700 lbs TW Reese Weight Distribution
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

15" Long shank offers an 8-1/4" rise and 5-3/4" drop and fits 2-1/2" trailer hitch receivers. Call 800-298-8924 to order Reese accessories and parts part number RP54977 or order online at etrailer.com. Free expert support on all Reese products. Guaranteed Lowest Price and Fastest Shipping for Reese Titan Weight Dist Shank - Trunnion Only - 5-3/4" Drop, 8-1/4" Rise - 1,700 lbs TW. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (27)
  • Q & A (164)
  • Videos (2)
  • Photos
  • Why etrailer?

Reese Accessories and Parts - RP54977

  • Weight Distribution
  • Shanks
  • Reese
  • Fits 2-1/2 Inch Hitch
  • Trunnion - 5-3/4 In Drop
  • 1700 lbs TW
  • 17000 lbs GTW
  • Trunnion - 8-1/4 In Rise

15" Long shank offers an 8-1/4" rise and 5-3/4" drop and fits 2-1/2" trailer hitch receivers.


Features:

  • Designed for use with trunnion-bar weight-distribution systems
  • Provides both drop and rise
  • Finished with black powder coat

Note: This shank will not work with weight distribution systems that use washers for angle adjustment of weight distribution head.



Specs:

  • Fits: 2-1/2" x 2-1/2" trailer hitch receivers
  • Tongue weight: 1,700 lbs
  • Distance from center of ball hole to hitch pin hole: 15-1/4"
  • Rise: 8-1/4" from top of hitch receiver tube opening
  • Drop: 5-3/4" from top of hitch receiver tube opening
  • Overall length: 17-1/2"
  • Limited lifetime warranty


NOTE: This shank will not work with the Curt hitches - the pin hole is set too far back on the receiver opening and it does not seat in properly.




54977 Reese Titan Adjustable Weight Distribution Hitch Bar






California residents: click here


Video of Reese Titan Weight Dist Shank - Trunnion Only - 5-3/4" Drop, 8-1/4" Rise - 1,700 lbs TW


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Reese Weight Distribution RP54977 Review

Today we are going to take a look at the Reese Tightened Weight Distribution Shank; part number RP54977. This item is designed for use with the trunnion bar weight distribution system. It provides both a rise and a drop. This is pretty hefty weighing in at 27 pounds. It has a black powder coat finish, and it's made right here in the U.S. Quick note, this shank will not work with weight distribution systems that use washers for angle adjustment of the weight distribution head.

It fits a 2 1/2 inch trailer hitch receiver. It has a tongue weight capacity of 1700 pounds. The distance from the hitch pin hole right here to the ball hole is 15 1/4inches. The ball hole will be out here in this area after it's attached to the weight distribution system. You'll attach your weight distribution system through here and then the ball platform will be out here.

The rise is 8 1/4 inches from the top of the shank to the highest that the ball platform can reach. The drop is 5 1/4 inches from the top to the lowest that the ball platform can reach. The overall length from here to here is 17 1/2inches and this item does come with a limited lifetime warranty. That should do it for our Reese Tightened Weight Distribution Shank; part number RP54977.


Customer Reviews

Reese Titan Weight Dist Shank - Trunnion Only - 5-3/4" Drop, 8-1/4" Rise - 1,700 lbs TW - RP54977

Average Customer Rating:  4.8 out of 5 stars   (27 Customer Reviews)

15" Long shank offers an 8-1/4" rise and 5-3/4" drop and fits 2-1/2" trailer hitch receivers.

- RP54977
by:

Works great. Shaft fits nicely in my hole. Just wish that it hung a l ittle lower. 41810


Comments

Mine sometimes drags the ground. 2012 Ram 3500 Limited

-- comment by: Eric L - 06/06/2013

1609

- RP54977
by:

The pin clip would not slide in place with the shank in the hitch. Your customer service represent suggested grinding off part of the power coating to make the holes line up. The suggestion worked but also had to grind some metal. Not a very good product. 277390



- RP54977
by:

This was exactly the drop-in replacement shank I needed when I found out that my new truck came with a 2.5" hitch receiver. My Reese trunnion bar WD head fit with no issues and with the size and weight of this thing, it's hard to imagine it could ever be the weak point of my hitch setup. 320235



- RP54977
by:

The shank is excellent - it does exactly what I would have expected it to. It is actually better than the original. The original shank on my 2004 Super Duty caused my 22' enclosed trailer to ride at an angle and the rear of the trailer scrape the ground. With this shank, the trailer is dead even, no more scraping - perfect. The Reducer Sleeve from 2-1/2" to 2" leaves a bit to be desired. As has been reported this is not a "snug" fit. Because it's not a "snug fit" after a year the pinhole is showing signs of wear. I am glad I went with the new shank vs. relying solely on the reducer sleeve to tow my trailer. 344586



- RP54977
by:

Arrived reasonable time and in good con dition. 711684



- RP54977
by:

Solid piece and works well with our anti-sway system. Only complaint is the gap in the holes. If the hole went up to be level with the insert point, it would allow full adjustability. Now it has about a 6 to 7 inch gap in the middle of the piece and we needed the ball to be in that gap. Otherwise, solid piece that is secure. 695622



- RP54977
by:

I placed my order directly on the phone. Person who I spoke to was both knowledgeable and courteous. Product arrived packed well & on time. Shipping was free and price was right. 641492



- RP54977
by:

This is a beast. Solid metal, heavy and heavy duty. Fits like it should and send very strong. Pulls a camper without problems 639998



- RP54977
by:

Definitely a product up to the task of pulling heavy. Fits perfectly to the truck and the hitch. 598826



- RP54977
by:

Product came 2 days early. Exactly what I ordered. Thanks 592238



- RP54977
by:

I purchased this product to work with my new Reese Steady Flex hitch,( part# 66561) as my truck has a 2.5" receiver. It worked extremely well and made for a perfect fit to my truck. 542541


Comments

I have been using this product for a year and it is still working great. I purchased this as an add on the the steady flex hitch and it works perfectly.

Ray - 07/17/2019

57921

- RP54977
by:

Outstanding Company. 503431



- RP54977
by:

Extremely heavy duty product that was exactly what I need for my 2016 RAM 2500. I tow a 32 ft 1955 Spartan Mansion travel trailer with a Reese weight distribution hitch. The trailer is by design low to the ground so I needed the extra drop this shank is made for. Product arrived 4 days after I placed my order. Packaging was great and this was the lowest price I could find anywhere. Couldn't be happier with my purchase! 394746



- RP54977
by:

Product arrived on time and in good condition. Easy place to shop 387140



- RP54977
by:

In moving from a 2003 F250 to a 2017 Ram 2500, the height of the receiver hitch increased by 4 inches creating a problem with my WD hitch. My WD head was already mounted in the lowest holes of the old shank and when moved to the new truck, the ball was (surprise!) 4 inches too high to tow the travel trailer level. I needed a different weight distributing shank to address this problem as well as to address the problem created by the larger receiver (2 1/2 inches) on the new truck to avoid use of a reducing sleeve. So this shank solved both problems! As others have noted, I did have to grind a bit of the coating in a couple of places to get the shank to completely fit into the receiver - not a big deal to me. It does get the WD head down where it needs to be to tow level and it is a heavy, well made piece. Be advised the WD head mounting hole spacing on this shank is 1 1/4 inches and some of the older WD heads (like mine) were 1 inch - so you may need a new WD head as well. 374387



- RP54977
by:

Looks well built and is exactly what I needed. 368164



- RP54977
by:

This shank is an excellent heavy duty Reese unit. Too heavy for the shipping box! I need this for my 2.5 inch hitch on my F-250. 361755



- RP54977
by:

Excellent product. Very good quality. Couldn't be more satisfied. 306910



- RP54977
by:

Stout. Definitely a good upgrade if your truck sits a bit higher, I drive a 16 Ram 2500. 276919



- RP54977
by:

i had a little problem with the pin . would not go all the way through the receiver so that i could put on spring clip. had to re bend curved end but i did get it to work . also the spring clip is very tight howard warren 273002



- RP54977
by:

I haul RV trailers comericially. The Reese Titan weight distributing hitch shank is an excellent product. I use either this shank with the dist. head attached or my Reese fifth wheel hitch with every single trailer that I deliver. I never have to worry about my hitches, I know that they are secure. I purchased all my hitches including my fifth wheel wiring harness and my backup cam, from etrailer. I,ve always received good service and prompt delivery. 249611



- RP54977
by:

As advertised, was needed for my 2014 ram 2500 to get the proper drop on my weight distribution hitch. Got the job done!! 213442



- RP54977
by:

I did quite a bit of research on and off etrailer.com prior to sending some questions to etrailer.com before my purchase. I received a speedy and helpful response which sealed the deal. My order arrived quickly, and the product is as described. Perfect. Time to go camping again! Thank you, etrailer.com! 205673



- RP54977
by:

Ricky at trailer was very helpful in finding the right product for our job. Fast shipping and great service 143816



- RP54977
by:

The product was just as advertised. What was exceptional was the personal service Outstanding!!!!! 125675



- RP54977
by:

Very good guality product. Fast delivery and good prices. 86025



- RP54977
by:

Exactly what I needed. Very well made and it works with my Blue Ox WD Hitch to give me the extra height needed for our trailer. 83735


28
28

Ask the Experts about this Reese Accessories and Parts

Do you have a question about this Accessories and Part?


  • Which 2-1/2 Inch Weight Distribution Shank Has the Longest Length
  • I have attached a list of all the weight distribution shanks we have that will fit into the 2-1/2" receiver tube opening on your 2015 Chevrolet Silverado 2500 for you. Out of these options, the Reese Titan Weight Dist Shank part # RP54977 has the longest distance from the center of the hitch pin hole to the center of the bolt hole which is 11-1/2". The next longest distance we have from the center of the hitch pin hole to the center of the bolt hole is 9" using part # BXW4018. The rest...
    view full answer...

  • Replacement Weight Distribution Shank for 2-1/2-Inch Hitch on 2017 Ram Pickup
  • We can help you with a solution to let you use your Husky Centerline 2-inch weight distribution hitch in your Ram's 2-1/2-inch receiver. There are two ways you can go. One solution is to install a hitch reducer sleeve in your Ram's 2-1/2-inch hitch, an item such as Reese # 58102, Curt # C45405 or Gen-Y # 325-GH-007. This will take up the slack inside the 2-1/2-inch receiver so that your 2-inch Husky shank fits properly. The other and better way to go is to replace the shank component...
    view full answer...

  • 2-1/2 inch Shank to Use With the Reese Steadi-Flex Weight Distribution System w/ Sway Control
  • Yes, we have the Reese Titan Weight Distribution Shank, part # RP54977, which is what you are looking for. This is a 15 inch long shank that has a Tongue Weight rating of 1,700 lbs, and has a max Rise of 8-1/4 inches and a max Drop of 5-3/4 inches.
    view full answer...

  • Recommended Weight Distribution Shank for 1,700 lb Tongue Weight Reese Trunnion Bar System
  • There is not a pole tongue adapter compatible with a system rated for 1,700 lbs. The largest option is the Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW # RP58393, which will work only if your total tongue weight (loaded trailer tongue weight and any cargo behind rear axle of tow vehicle) is under that 1,400 lbs. If you want a compatible weight distribution shank as systems this size often don't include, I recommend the Reese Titan Weight Distribution...
    view full answer...

  • Weight Distribution Hitch for 2018 Grand Design Reflection 315 RLTS Travel Trailer
  • Sometimes just use of new spring bars can update a weight distribution hitch to match the tongue weight (TW) of a new trailer, but in the case of your Equal-I-zer system, part # EQ37140ET, the highest-rated bars are the 1400-lb set # EQ90-01-1499 that you now have. I noticed the various trailer specs you provided seemed not to match up; the dry tongue weight of 1400-lbs that you quoted seemed high for a trailer with a GVWR of 10995-lbs. I checked the specs for the 315 RLTS on the Grand...
    view full answer...

  • Recommended Weight Distribution System for a 15,000 lb Box Trailer
  • I do have a solution for you but unfortunately you do have to use a TorkLift XL Shank like part # TLM9011 along with the SuperHitch on your tow vehicle to be able to use the Everest Weight Distribution System # TLWD1000. If 15,000 lbs is the GVWR (gross vehicle weight rating) of your trailer or that is the most it will weigh when you are towing it then you can potentially use the Strait-Line # RP66075 instead. This is rated to tow up to a 17,000 lb trailer and it has a tongue weight...
    view full answer...

  • Can Reese Weight Distribution System for 2 inch Hitch be Used in a 2-1/2 inch Hitch
  • If you have a Reese weight distribution system that fit a 2 inch hitch you can easily swap out just the shank of it and it will be able to install in your new 2-1/2 inch hitch. For that we have the part # RP54976 which can do up to a 1-1/4 inch drop or the part # RP54977 which can do up to a 5-3/4 inch drop.
    view full answer...

  • Weight Distribution and Sway Control Recommendation for 2016 Ford F-250 Towing 11.5k Trailer
  • The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. For a trailer that weighs 11,500...
    view full answer...

  • Will Reese 2-1/2" Weight Distribution Shank RP54977 Work with a Reese SC Weight Distribution System
  • Yes, you can use Reese Titan Weight Distribution Shank # RP54977 with your Reese SC weight distribution system. I have linked a video review of this shank for you on a similar truck.
    view full answer...

  • Weight Distribution Recommendation for Travel Trailer that has Tongue Weight 1,365 lb
  • Looks like the higher towing capacity number your truck has of 19,000 lbs of trailer weight is if you use the hitch as a 2.5 inch hitch and a weight distribution system. Since your trailer has a loaded tongue weight of 1,365 lbs the Strait Line system part # RP66075 that you referenced would be exactly what you'd want as it has a tongue weight range of 1,000 to 1,700 lbs. You'll also need a shank for this system to fit the hitch and WD head. For that you'd want the Reese shank part # RP54977...
    view full answer...

  • Weight Distribution for Dump Trailer with 8 Inch Tall I-Beam Frame
  • I do have a great option for you but a Reese system is not going to be the best choice in this case. You will need to box the trailer frame where the weight distribution brackets will go by having steel plates welded on. What you can use is an Equal-I-zer system, # EQ37120ET as an example, and then add 2 outer link plates, # EQ90-02-5378, sold in quantities of 1, and 2 inner link plates, # EQ90-02-5208, also sold in quantities of 1. That would allow you to use the system on an 8 inch...
    view full answer...

  • Recommended Weight Distribution System For 1200 To 1500 LBs Tongue Weight Capacity
  • The best thing for you to do is to use a system like the Reese Strait-Line Weight Distribution, part # RP66075. This system handles tongue weight from 1000 lbs to 1700 lbs. This would work for you because you would not need to worry about upgrading at a later date and making sure the system matches. Any system 1,500 lbs and higher will require a 2-1/2 inch receiver. To make sure everything is level i recommend the Reese Titan Weight Dist Shank, part # RP54977. This shank is designed...
    view full answer...

  • Recommended Weight Distribution System for a 15,600 GTW Car Hauler
  • To determine the correct Weight Distribution (WD) system for your application you will first need to find what your Total Tongue Weight (TTW) is. Your TTW can be found by adding the Tongue Weight (TW) of your fully loaded and ready-to-tow trailer along with the weight of any cargo behind the rear axle of your tow vehicle. You will then want to pick a system that has a TW range that your TTW falls in the middle of. Keep in mind that your trailer TW should be 10-15% of your loaded trailer...
    view full answer...

  • Shank Recommendation for Use with Reese Strait Line in 2-1/2 inch Hitch
  • Yes, the shank part # RP54977 that you referenced would work perfectly for you. It will allow you to swap out the shank you have in your # RP66084 to give you the drop you need and then also fit the 2-1/2 inch hitch you have.
    view full answer...

  • How to Upgrade the Reese 12K Strait-Line to Reese 17K Strait-Line Weight Distribution System
  • Yes, you can upgrade the Reese Strait-Line 12K Weight Distribution System part # RP66084 to the Reese Strait-Line 17K Weight Distribution System part # RP66075 by replacing the spring bars with the Reese Replacement Trunnion Spring Bar, 1,700 lbs part # 66010 (2) and shank with either the Reese Weight Distribution Shank part # RP54976 or part # RP54977.
    view full answer...

  • Reese Weight Distribution Shank Recommendation for 2-1/2 inch Hitch
  • Reese makes shanks that will fit a 2-1/2 inch hitch like you have and will work with their weight distribution systems. So all you'd have to do is swap out your current shank for a shank like the # RP54977 and you'd be set.
    view full answer...

  • Will Pro Series Weight Distribution Work with Reese Titan Shank for 2-1/2 Inch Hitches
  • I spoke with my contact over at Pro Series and Reese and you can use Titan shank # RP54977 with your Pro Series weight distribution system. I have included a link to a video review of this shank to the right. Please note this shank will not work with the Curt hitches - the pin hole is set too far back on the receiver opening and it does not seat in properly. Will also not work with newer 2012 - 2013 Ford OEM 2-1/2 inch hitches.
    view full answer...

  • Can 1,700 Pound Trunnion Spring Bars Replace 800 Pound Spring Bars for Trailer Weight Distribution
  • I spoke with my contact at Reese and he stated that if your 800 pound system is newer, within the last 3-1/2 to 4 years, then the higher capacity 1,700 pound bars, like # 66010, will fit. However, what you need to also look at is the shank. The shank that came with the 800 pound system is good for a maximum of 1,500 pounds, like # RP54970. The shank used for the complete Reese 1,700 pound system is # RP54977, and it only fits in a 2-1/2 inch receiver. If you can use the 1,500 pound shank...
    view full answer...

  • Weight Distribution Recommendation for 1,000 lbs Tongue Weight and 2-1/2 inch Hitch
  • The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. For an economical option that...
    view full answer...

  • Will a High Coupler Height On a Boat Trailer Affect Stability
  • I would assume as well that boat trailer manufacturers have some inclination as to how the trailer will perform with a boat attached as that is its purpose after all but I don't have specifics on this. The coupler height however does not necessarily have a direct affect on the center of gravity for the trailer because some are mounted on top of the tounge which appears to be the case for you. Therefore, I would not fret too much unless you start to run into issues with stability. If...
    view full answer...

  • Replacement W/D Head and Dual Cam for Reese # RP66074 Strait-Line Weight Distribution System
  • The shank you referenced, part # RP54977 would be a good choice for you, as long as it provides sufficient drop. We have an FAQ article that shows how to determine the rise or drop needed in a ball mount. The procedure is the same for a weight distribution shank. The # RP58167 would be the correct replacement weight distribution head for the # RP66074 Strait-Line Weight Distribution system you have. Be sure to lubricate the head/trunnions as mentioned in the instructions that I've linked...
    view full answer...

  • Recommended Weight Distribution for Motor Home Towing 13,000 lb Trailer
  • If your motorhome does indeed have a hitch with a 10000 lb capacity, it means that the hitch is capable of towing a trailer weighing up to 10000 lbs. To confirm this, the hitch should have a sticker or plate on it listing the capacities. The tongue weight capacity should also be listed. Tongue weight is the amount of weight that can safely be suspended from the receiver (or the maximum downward force exerted). The hitch might also list a capacity for use with a weight distribution (W/D)...
    view full answer...

  • Comparing the 1,400 lb Steadi-Flex # RP66561 and the 1,200 lb Steadi-Flex # RP66560 WD Systems
  • That is an excellent question. When you are trying to determine what Weight Distribution (WD) system to use, you need to add the Tongue Weight (TW) of your loaded and ready-to-go trailer, and any weight that is behind the rear axle of your tow vehicle. The best way to figure this out is to load everything up as if you were getting ready to go on a trip and then choose a WD system based off of that. Another thing to keep in mind is that you want the TW of your loaded trailer plus the...
    view full answer...

  • Can a Weight Distribution System be Used on an I Beam Trailer
  • You will need to use a standard weight distribution kit like the Heavy Duty Trunnion Weight Distribution System # RP66131 for your I-beam trailer. This system would be rated perfectly for your 10k trailer if it was going to be loaded near it's capacity. This system has a tongue weight range of 800 lbs - 1,500 lbs which would be most likely what you would have. For a shank you would then want the part # RP54977. To use the Heavy Duty Trunnion Weight Distribution System, # RP66131, or...
    view full answer...

  • Extra-Long Weight Distribution Shank for 2-1/2-inch Hitch on 2015 Ram 1500
  • We do offer weight distribution shanks for 2-1/2-inch hitches that are 15-inches long. Using a 2-1/2-inch shank will avoid the need for your reducer sleeve. These items include the Reese # RP54977 for trunnion bar systems that do not use washers for head angle adjustment. If you have a Curt weight distribution system and/or prefer a 2-inch shank you can use # C17122 which is 16-inches long.
    view full answer...

  • Availability of Hitch Head and Trunnion Bar Heads For 17K Reese WD System on 2012 Ford F-250
  • The Reese Replacement Head, part # RP58167, is the correct head for Reese trunnion bars in the Reese 17K Titan Weight Distribution System, part # RP66006. It will attach to the Reese Titan Weight Distribution Shank, part # RP54976, which fits a 2-1/2 inch hitch. This shank is 15 inches long and has a 5-1/4 inch rise and a 1-1/4 inch drop. It will also fit the Reese Titan Weight Distribution Shank, part # RP54977, which fits a 2-1/2 inch hitch and is 15 inches long with a 8-1/4 inch...
    view full answer...

  • Availability of 2-1/2 Inch Shank for Reese Weight Distribution System
  • We do have weight distribution shanks available that are designed to fit 2-1/2 inch hitch receivers like what is on your Silverado 2500. For the Reese Steadi-Flex Weight Distribution System # RP66561 that you were looking at, you will just need to add a shank like the Reese Titan # RP54977. This shank is compatible with 2-1/2 inch receivers and will provide up to a 8-1/4 inch rise or 5-3/4 inch drop. You will also want to make sure the weight distribution system you choose is properly...
    view full answer...

  • Availability of Weight Distribution and Sway Control for a 2-1/2 Inch Class V Trailer Hitch
  • If your Class V trailer hitch has a 2-1/2 inch receiver, then you can use the Strait-Line Weight Distribution w Sway Control, # RP66075. I have included a link to the installation details below. You will also need shank # RP54977, and a properly sized ball like # 63840. According to one of our installers. You could use # RP66074 that you have referenced in a 2-1/2 inch receiver, you would just need the 2-1/2 inch shank, # RP54977. I have included a link to an FAQ article on weight distribution...
    view full answer...

  • Recommended Sway Control for Trailer Over 12,000-lbs
  • Independent friction-style trailer sway control systems like the Reese # 83660 can help with trailer sway in lighter trailers, and two of them can be used with trailers up to about 10K and 26-feet or more in length. For a trailer over 10,000-lbs you will need a dependent (or built-in) type sway control that works with a weight distribution system. Friction units simply cannot deal with sway in trailers over that weight. The key to selecting a weight distribution/sway control system (WD/SC)...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Test Fit:
Matthew K
Installed by:
Brandon M
Installed by:
Cole B
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Amanda M
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.