Machined steel trailer wheel lug nut, fine threads, 60-degree cone. Fits 1/2" wheel bolts. Call 800-298-8924 to order Redline accessories and parts part number X1023R or order online at Free expert support on all Redline products. Guaranteed Lowest Price and Fastest Shipping for Trailer Wheel Lug Nut - 1/2"(Each). Accessories and Parts reviews from real customers.
Select Vehicle:change vehicle
summer hauling headquarters

Price: $1.02

Trailer Wheel Lug Nut - 1/2"(Each)

Item # X1023R

lowest price pledge

Our Price: $1.02

Orders above $99 qualify for free shipping


In Stock.
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

Redline Accessories and Part
Redline Accessories and Part
Redline Accessories and Part
Redline Accessories and Part


  • Tires and Wheels
  • Boat Trailer Wheels
  • Golf Cart Tires and Wheels
  • Hex Nut
  • Lug Nut
  • Redline
  • 60-Degree Cone
  • Zinc-Plated Steel
  • 13/16 Inch Outer Diameter
  • 1/2 Inch Wheel Bolt

Redline Accessories and Parts - X1023R

Machined steel trailer wheel lug nut, fine threads, 60-degree cone. Fits 1/2" wheel bolts.


  • Machined steel construction resists rust and corrosion
  • Fits 1/2" wheel bolts
  • 60 degree coned (standard)
  • 1/2" x 13/16" Hex
  • Fine threaded

X1023R Machined Steel Trailer Wheel Lug Nut - 1/2"(Each)

Related Products

Customers compare X1023R to these similar products

Customers Who Purchased This Accessories and Parts Also Bought...

Video of Trailer Wheel Lug Nut - 1/2"(Each)

Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.

Video Transcript for Redline Accessories and Parts X1023R Review

Today we're going to review part number X1023R. This is the 1/2 inch by 20 acorn style trailer wheel lug nut. This is designed to fit on the 1/2 inch by 20 bolt size, and if you notice it does have the 60 degree cone to it. To fit the 60 degree taper on the wheel. Overall length on this, very bottom to the very top, is 5/8 inches. The hex head size or the socket size you would use is 13/16. I happen to have a socket here that's size 13/16, and if you notice, fits right onto the lug nut. Then I have an example of a trailer wheel here.

You can see on the lug holes they have the 60 degree taper. So, basically a lug nut would fit right on there and you just torque it down to the specs and it will hold it into place. That should do it for the review on part number X1023R. This is the 1/2 inch by 20 acorn style trailer wheel lug nut. .

Customer Reviews

Trailer Wheel Lug Nut - 1/2"(Each) - X1023R

Average Customer Rating:  4.8 out of 5 stars   (128 Customer Reviews)

Machined steel trailer wheel lug nut, fine threads, 60-degree cone. Fits 1/2" wheel bolts.

- X1023R

by: Boyd01/17/2013

After some research I decided to order my tires/wheels from etrailer. The selection was outstanding and I couldn't beat the prices. The order was processed and shipped quickly and the product is even better than expected. Thank you trailer. 63421


I was happy then and I am happy still. It was and would still be the right thing to do!

Boyd - 07/18/2014


- X1023R

by: Jim C03/31/2014

These are just good basic lug nuts. Nothing fancy, just needed new lug nuts when installing new wheels and tires. Good price and good quality. 123069


No problems!

Jim C - 03/31/2015


- X1023R

by: jaynegj12/24/2015

quicker than expected. Thanks 234201


Excellent fit easy instillation

jaynegj - 12/23/2016


- X1023R

by: Robert D.12/08/2013

The whole order was perfect. I'm rebuilding the running gear on a1976 3 horse slant then remodeling the whole trailer by converting the trailer into a communications trailer for HF radio for disaster response. Front area will be living quarters. I am in our State Guard as a radio operator and also in county emergency management. This trailer will be my shelter and operating station when deployed to hurricanes and such. Since I'm spending my own funds on this, the good prices on etrailer are greatly appreciated. 109555

- X1023R

by: Jeff R.08/29/2013

I needed new lug nuts to go with the new wheel studs I couldn't find anywhere until I stumbled upon I never realized just how many products they carry. Their web site is very easy to navigate, the ordering process was extremely simple, and the shipment arrived within just a couple of business days! Much better than most of the other websites I have used in the past. I will recommend this web site to all my friends looking for any trailer or towing part in the future. Thanks! 97473

- X1023R

by: Rich01/01/2017

I ordered wheel studs, shackle straps, and nuts to replace rusty components on my trailer. These are additional parts after ordering new trailer springs from etrailer earlier. Everything fit up great, and now both my axles support the trailer. Yay! Thanks to Etrailer for having all this stuff for quick delivery, and it saves a ton over the local shop. 331157

- X1023R

by: Dan C07/23/2017

Excellent product makes the job so much easier with everything all put together for you. Can't get this product anywhere else for this amazing price. Been telling my buddies about this website, also fast shipping I received my order in about 4 days right to my door. Will buy from again in a heartbeat. 411068

- X1023R

by: Thomas04/04/2013

I bought these to replace the lug nuts on my 1962 Thunderbird. I had a very difficult time locating 1/2-20 with 13/16 nut size. I just happened to find these searching with Google. They are an exact match to the originals that were on the car. I am very pleased. 74157

- X1023R

by: Paul Smith04/17/2017

I have used several parts from etrailer over the years, and have never had any problem. they handle only the best quality and I can get hard to find products sent quickly and easily right to my house. I could not recommend a company more highly than etrailer. 369932

- X1023R

by: Gary R.07/20/2016

What can better make your old rusted wheel lugs look new again than just simply buy a new set all way around.At this price an easy choice.More people should know about if you want to get the best deals that actually save you dollars. 274255

- X1023R

by: Norm C.05/01/2012

I'm glad I ordered 8 new lug nuts to go with my new tires and rims. My old lug nuts were undersized (3/4") and the new ones are the correct size for the rims (13/16"). Good price and since I included them in my tire order, free shipping. 38922

- X1023R

by: CJ04/08/2015

Product arrived promptly and the nuts are good quality. My fault, though, that I ordered 1/2" (standard) and didn't measure my existing nuts (7/16")...oops. Oh, well, at these great prices, I'll keep them and find another use. 184129

- X1023R

by: Kirk f03/18/2015

Had to call for tech help , very knowledgable with products. Didn't get transferred to someone else like most other places. took my order promptly over phone. Delivered on time as told. Great to do business with. 179465

- X1023R

by: Jeff L06/05/2015

These are great quality lug nuts. My old nuts were rusty and I could barely get them off (had to use a 3/4" drive impact wrench). I applied never seize to the studs before installing the new nuts. 201017

- X1023R

by: Dave03/05/2015

Lug nuts were great looking and functioning for my new trailer tires and rims. Great service and were included in one of the boxes with tire and rim. Would order from etrailer again in the future! 177106

- X1023R

by: Steve E.03/18/2011

I bought a new trailer and wanted to replace the rusting lugs as well as get a few spares and these fit the bill quite nicely. These are strong, heavy-duty and do the job. 9778

- X1023R

by: Paul12/13/2016

Every item I ordered worked and fit exactly as I had hoped it would. Prices and shipping was top notch and will definitely buy from e-trailer again. 326305

- X1023R

by: Mark S07/13/2017

Lugs and nuts fit perfectly. Could not get them locally but etrailer web site gave measurement instruction to insure ordering the right parts. 406219

- X1023R

by: Terry l.07/09/2017

I ordered 4 tires,caps and lug nuts . very impressed with product going on 5th wheel rv very helpfull when ordering, recived withen a week . 404183

- X1023R

by: LARRY K04/07/2017

What can you say about a Lug Nut? They either work or they don't! These have a good plating on them. Shouldn't rust for a very long time. 364333

- X1023R

by: Almost forgot09/04/2015

I swapped the entire original brake and hub assembly out. The old and new way to mount was different. Glad I purchased. 223987

- X1023R

by: Ozzie09/23/2012

These fit on perfectly. Time will tell if they stay clean and not rust. They were so cheap I bought a bunch of them. 55567

- X1023R

by: John S.12/15/2011

A lug nut is a lug nut I guess. Bought based upon price and free shipping. Prompt service was well above the norm! 28180

- X1023R

by: Robert B.05/05/2013

All forty-four of them perfect. As a reminder, you should always re-torque lug nuts after the first 50 miles :-) 79087

- X1023R

by: Wayne07/11/2012

etrailer service was fast. A nut is a nut. Appears to be good steel and is milled and tapped correctly. 47474

- X1023R

by: Ted Day08/28/2013

all of my recent orders have been of high quality and delivered in a timely manner Thanks Ted 97316

- X1023R

by: John03/17/2017

Part of complete purchases wheels & nuts. Right count size and new condition. Came together go(ET)!! 353787

- X1023R

by: Timothy F04/26/2011

They are pretty good. I guess I'll know for sure after I dip my trailer a few times in saltwater. 12379

- X1023R

by: Don07/12/2016

Ordered these since I had a couple on my trailer that were not in good shape. Fit was perfect. 270880

- X1023R

by: Roy Y.10/22/2011

A good replacement for old or damaged lug nuts,good idea to have a few spares just in case. 25966

- X1023R

by: steven carreiro03/01/2012

The product was exactly what I wanted and it was delivered quicker than I expected. Steve 32882

- X1023R

by: Crzy406/20/2017

All fit as expected shipping was a day earlier than expected so all in all it worked out 396785

- X1023R

by: Charlie G10/02/2014

These were 1/4 the price of the same size nut at a local auto store. They are perfect. 154097

- X1023R

by: Jeoff H.06/01/2016 takes any guesswork out of installing easy or complex parts and systems. 255270

- X1023R

by: Rich A.01/27/2017

Shipped quickly and packaged very well. Made it easy to handle the tires and wheels. 335935

- X1023R

by: michael a03/19/2014

etrailer had the product at the best price . Shipping was extremely fast, great job. 121262

- X1023R

by: Randy06/12/2016

These fit the lugs on my 16 ft. flatbed trailer with 15 inch tires and 5 hole rims. 260468

- X1023R

by: Leo C04/10/2012

Quality products at a great price. Fast and free shipping was also a great surprise. 36765

- X1023R

by: Bill D06/26/2012

Good quality product, price was excellent and shipping fast, couldn't ask for more. 45674

- X1023R

by: Monty Elmore02/20/2017

Received product in great shape. Fast shipping & great service. Would use again. 343573

- X1023R

by: Monty Elmore02/20/2017

Received product in great shape. Fast shipping & great service. Would use again. 343572

- X1023R

by: CJ10/25/2016

Very helpful - Sam walked me through the parts needed and they arrived promptly. 312548

- X1023R

by: Chuck08/22/2012

The tire stud and lug nuts were the perfect size. thanks and promptly delivered. 52585

- X1023R

by: Stanley G12/17/2016

This is one stop shopping, they have it all. Great prices and fast delivery. 326739

- X1023R

by: RAD08/21/2015

Looks nice, delivered very quickly. Not much more I can say about a nut:-) 220884

- X1023R

by: Michael03/01/2017

Great product and price-I received in two business days with free freight 350854

- X1023R

by: Alan G.07/16/2016

new lug nuts with new wheel tire assembly look great.worked like a charm. 272635


still working great after 1 year of use

Alan G - 07/16/2017


- X1023R

by: Greg H.03/02/2017

Great product. I got exactly what I expected when I placed the order. 350897

- X1023R

by: Pharmdoc07/02/2017

Nothing special, but they get the job done nicely. No complaints. 401089

- X1023R

by: Randy M.04/28/2014

Great lug nuts. I used them to replace some on my cargo trailer. 127689

Show More Reviews

Ask the Experts about this Redline Accessories and Parts
Do you have a question about this Accessories and Part?

  • Availability of a Replacement Trailer Wheel with 4 on 4 Bolt Patten for a 13 Inch Tire
  • I believe I can help you. The rim size you have does not seem odd. We have numerous rims with the 4 on 4 bolt pattern for 13 inch tires. The center hole or pilot diameter is smaller than the ones on the wheels we carry. The only reason this would be a factor is if the wheels center on the hub using the pilot hole OR if the axle diameter is larger than the pilot hole. If the wheel is centered on the hub using the lug nuts, then having a larger pilot diameter is not a problem. In order...
    view full answer...

  • Recommended Electric Over Hydraulic Brake Set Up for 2016 Montana 3710FL 5th Wheel
  • I was able to confirm that your Montana 3710FL uses tandem 7000 lb axles. A 7K axle would typically have an 8 on 6-1/2 wheel bolt pattern and the spindles would be compatible with a 25580 inner and an 14125A outer bearing. You'll want to identify the inner and outer wheel bearings used by your current hub/drums. Let me know if your hubs uses a different outer bearing. If your drums use the 25580 inner and 14125A outer bearing, I'd recommend the Kodiak 13 Inch Hub/Rotor Kit, part # K2HR712E....
    view full answer...

  • Vintage Trailer Wheel Needed for a 1972 Prowler Travel Trailer with Hub Centric Wheel
  • It sounds like the wheel on your 1972 Prowler travel trailer is a hub centric wheel that is secured to the hub with a wheel bolt like the flat head wheel bolt, # 090753. A hub centric wheel centers on the raised portion of the hub that you mentioned and not on a coned wheel bolt or lug nut. If this is the case, we do not stock a replacement wheel for your hub at this time. If your wheel uses coned wheel bolts like the 60 degree wheel bolts, # RG02-020, or coned lug nuts like the Trailer...
    view full answer...

  • Recommended Replacement Wheel Stud Bolts for Boat Trailer with Wheel Bolts Stamped 6109 SJ
  • Thanks for your measurements, these were a big help! A great replacement wheel stud bolt for the bolt dimensions you provided is the # 7-122. A compatible nut for this bolt is the # X1023R, for a zinc coated nut for better protection again corrosion, I recommend the # CE11051 The above parts are sold in a quantities of 1, so for a quantity of 4 you will want to update the quantity box on the page that I've linked below for you.
    view full answer...

  • How to Determine if a Trailer Wheel is Hub-Centric or Lug-Centric
  • First, I would say if there is any question on the road worthiness of the trailer, take the steps to correct it. Better safe than sorry. Some trailers have wheels that are hub-centric, the wheel is centered on the hub using the center pilot holes. Other trailers have wheels that are lug-centric, the wheel is centered on when you tighten down the lug nuts. To determine which one you have on your trailer, take a look at how the wheel attaches to the hub. If it uses wheel bolts, like...
    view full answer...

  • Disc Brake Kit Recommendation for Lippert 7k Axles
  • The disc brake kit # K2HR712SCS that you referenced should work well for you. You would need a quantity of 2 of these for each of your axles. These have the same bolt pattern as your current setup and are rated a 7k. You can verify that these will fit your spindle by removing a current hub and checking the numbers on the bearings. If they are 25580 for the inner and 14125A for the outer this kit would fit the spindle and work well. This kit will fit a spindle that has a diameter of...
    view full answer...

  • Bearing Kit, Nev-R-Adjust Brakes, and Lug Nuts For an AxleTek Axle
  • To get you the correct bearing kit for your AxleTek axle with an inner bearing number of # 25580, I will need the size (or part number) of the outer bearing and the size (or part number) of the grease seal. There are three different choices of outer bearings that will work, along with two different grease seals. Since you do not have the part number on the outer bearing, you will want to use dial calipers to measure the dimension on the spindle where the outer bearing sits once installed....
    view full answer...

  • Bolts Needed for Mounting a Spare Wheel and Tire to the CURT Hitch Mounted Spare Tire Carrier
  • You would need to find grade 5 or harder bolts, nuts and washers that match the wheel stud diameter of your wheels to mount a spare wheel and tire to the CURT Trailer Hitch Mounted Spare Tire Carrier, # c31006. It would also help to use a nut that matches the lug nuts for your wheel so you do not need an additional wrench to remove the spare from the carrier. Most trailer wheels use a 1/2 inch diameter wheel stud, so 1/2 inch hardware would work well, check to be sure of the wheel stud...
    view full answer...

  • Recommended Lug Nut Torque on Loadstar ST175/80D13 Bias Trailer Tire with 13 inch Wheel # AM3S140
  • For a 1/2 inch x 20 lug nut size, which is what is used on the Loadstar ST175/80D13 Bias Trailer Tire with 13 inch wheel, # AM3S140, you will torque them down to 75-85 foot pounds. You should re-torque them at 10 miles, 25 miles, and 50 miles, and then periodically after that. You might also be interested in some 1/2 inch lug nuts # X1023R or # CE11051.
    view full answer...

  • Availability of 1/2-Inch x 20 Screw-In Replacement Wheel Stud Like # 25-13-2
  • We do offer screw-in replacement wheel studs similar to the 3/4-inch diameter part you referenced, item # 25-13-2 from Redline. In the 1/2-inch diameter size you need we offer # 25-53 which is 2-inches overall, with a 1-1/16th fine thread lug nut end and a 13/16th long hub end. We also have # 25-51 which also has a 1/2-inch thread diameter, 2-inch overall length, 7/8-inch-long fine thread lug nut end and a 5/8-inch long coarse thread hub end. Matching lug nuts are also on offer, part...
    view full answer...

  • Which Lock Washer Do I Need For My Dexter 5,200 lb. Trailer Axle
  • For a lock washer for your Dexter 5200 lb axle, you will need Washer, part # 5-23. If you need a tang style washer, you will need part # 5-101 The tang style washer is used on E-Z Lube spindles and functions the same as a cotter pin, but designed for the E-Z Lube Spindles. If you need a replacement spindle nut, you will need Trailer Spindle Nut, part # 165686. The lug nut you will need Trailer Wheel Lug Nut, part # X1023R, which is sold in a quantity of 1. The item you selected,...
    view full answer...

  • What Is The Thread Pitch On The Replacement Trailer Hub Wheel Stud, Drive-In # RG03-020
  • The hole size that the Replacement Trailer Hub Wheel Stud, Drive-In, part # RG03-020, will use is a 1/2 inch hole. The spline diameter on the wheel stud is 0.62 inches which is a little larger and that allows the wheel stud to have a press fit when driven into a 1/2 inch hole. The thread pitch on the wheel stud is 1/2 x 20. It will accept the Chrome Trailer Wheel Lug Nut - 1/2 Inch, part # 12CLN, and the Trailer Wheel Lug Nut - 1/2 Inch, part # X1023R.
    view full answer...

  • Troubleshooting Lug Nuts or Wheel Bolts Not Threading On To Hub With Kenda Tire and Wheel # AM31206
  • The Kenda KR25 Tire and Wheel, # AM31206, is designed to work with bulge style lug nuts 1/2 inch - 20 threads per inch like part # AM90054. The bolt holes on the wheel will have a 60 degree angle that this lug nut will fit into to tighten onto the wheel stud. If you are using a lug nut similar to part # X1023R, we have experienced problems with this style of nut not fully threading onto the stud because there is not a bulge seat at the 60 degree angle and the hex portion begins to strip...
    view full answer...

  • Replacement Drive-In Studs For Dexter Trailer Hub And Drum Assembly # 8-388-80UC3
  • The wheel stud used on part # 8-388-80UC3 is part # 7-262. These are drive-in 1/2 inch studs that measure 2.7 inches long, and will work well for your hubs. If you need lug nuts I recommend part # X1023R.
    view full answer...

  • Does Valve Stem on Taskmaster 15 x 6 Inch Trailer Wheel 560550WS1 have a PSI Rating
  • The valve stem specs are specifically listed but the highest load capacity tire that fits these wheels is a 225/75-15 load range D rated for 65 psi so based on that 65 psi is what I would stick with. The wheel # 560550WS1 takes regular 60 degree cone lug nuts such as # X1023R.
    view full answer...

  • Offset of Wheel/Tire Combo # AM34964 Does it Include Center Cap and Lug Nuts
  • The offset of a wheel refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel. A negative offset will move the tire away from the trailer, while a positive offset will move the tire closer to the trailer. The AM34964 you referenced has an offset of negative 8 mm, which means the mounting surface is closer to the trailer. This means the center line of the wheel will be further from the trailer. You can see this more clearly...
    view full answer...

  • Replacement Wheel Studs and Lug Nuts for a 2011 Crossroads Cruiser 5th Wheel Trailer
  • The first thing to check is if the hubs have studs that are driven in or that are threaded in. Stud # K12WB2 is a drive-in type so if you have ones that thread in it would not work. If they are drive-in then you will want to check the picture I have included that shows all the measurements to determine if they will fit properly in the hub. This stud takes a 1/2"-20 lug nut such as # X1023R. This is an open-ended lug nut so the additional length of the studs would not be a problem....
    view full answer...

  • 1/2 Inch Lug Nut Recommendation for a Boat Trailer
  • Trailer wheel lug nut # X1023R is your average everyday steel lug nut. Nut the best option for a marine environment on your boat trailer. I recommend the zinc plated lug nut # CE11051. The zinc plating is going to be much more corrosion resistant than steel.
    view full answer...

  • What do I Need to Complete an Electric over Hydraulic Brake System for my Trailer With 3,500 axles
  • The Kodiak Disc Brake Kit 5 on 4-1/2 Bolt Pattern # K2HR35DS is an excellent choice for an electric over hydraulic brake system. This kit doesn't come with lug nuts or bearings. The lug nuts are part # X1023R, and the bearings are part # L68149 and part # L44649. The first thing you are going to want to install on your trailer is brake lines. We have the Kodiak Hydraulic Brake Line Kit # 18SI-BLKIT if you are just putting the brakes on one axle. Since you have 2 axles that means you...
    view full answer...

  • Lug Nut Recommendation for a Americana Aluminum HWT Series S5 Trailer Wheel
  • Your 6k Dexter axles will have hubs on them that accept a 1/2 inch lug like # X1023R. For the Americana Aluminum HWT Series S5 Trailer Wheel, # AM22658HWTB, I recommend Americana Trailer Wheel Lug Nut, # AM90049. A standard nut would be too shallow for the wheel and you would not be able to get it torqued down correctly. The studs in the hub should be plenty long enough for the wheel.
    view full answer...

  • Will The 205/75D14 Tire Size Fit On The Dexstar 14 x 6 Steel Spoke Trailer Wheel # AM20354
  • Yes, the 205/75D14 tire size will fit on the Dexstar Steel Spoke Trailer Wheel - 14 x 6 Rim - 5 on 4-1/2 - Galvanized Finish, part # AM20354. The 205/75D14 tire size will fit on a wheel width of 5 inches, 5-1/2 inches, 6 inches, and 6-1/2 inches. The best wheel width to use is the middle of the width range, like the 5-1/2 inch width or 6 inch width. Also, remember that trailer tires should always be inflated to their maximum psi rating for best performance and longest life. Other...
    view full answer...

  • Recommended Replacement Wheel Stud For a 2016 Kaufman 3 Car Wedge Trailer With 7,000 lb Axle
  • We do have the replacement part you need. I reached out to Kaufman to get the specific dimension of your wheel stud for your 2016 3 car wedge with 7,000 lb axle. They told me that it is a 1/2 inch x 1.99 with 20 threads per inch. The replacement part I recommend is the Kodiak Wheel Bolt # K12WB2. If you lost the Lug when the stud broke, you will want, # X1023R, or for an enclosed chrome lug # 12CLN.
    view full answer...

  • Proper Centering of New Trailer Wheel Whose Pilot Hole is Larger Than Original Wheels
  • You were given some correct information. The new trailer wheels you purchased that have a larger pilot hole will still be compatible with your hubs in terms of being properly centered. The key is indeed the coned lug bolts, such as # RG02-020. These will automatically center the wheel on the hub as they are tightened, as will coned lug nuts such as # X1023R. The larger pilot hole does not matter for alignment. However, since your wheel has a larger pilot hole diameter this means that...
    view full answer...

  • Which Lug Nut Fits a Drive In Wheel Stud # RG03-080
  • The wheel stud, # RG03-080, accepts a 1/2 inch lug nut. A standard lug nut has a 60 degree cone like # X1023R. When choosing a replacement wheel stud, you will have to go by the measurements of the stud. You can compare the measurements provided on the product pages for wheel studs, like # RG03-080, to your existing studs to determine if there is a correct match. You will need to drive out a stud to measure it accurately. I have included a link to all the drive in wheel studs we carry....
    view full answer...

  • What Type of Lug Nuts Needed to Mount Taskmaster ST205/75D14 Bias Trailer Tire # TTWA14B45SM
  • The Taskmaster ST205/75D14 Bias Trailer Tire with 14-Inch Silver Mod Wheel # TTWA14B45SM requires standard 60-degree-coned fine thread lug nuts for installation, such as # X1023R that fits 1/2-inch wheel studs.
    view full answer...

  • Replacement Wheel Bolts For Folding Utility Trailer
  • One of the wheel bolts we offer are Redline Wheel Bolts, part # RG02-020. These are 1/2-20 bolts which are the standard for many hubs, drums, and wheels. They also have the industry standard 60 degree cone and are fine threaded. The 1/2 inch lug nut we offer is part # X1023R. These fit 1/2 inch wheel bolts. If you can possibly loosen at least one of the lug bolts you currently have we would have a better chance of trying to find the replacement you need. I recommend calling your...
    view full answer...

  • Compatibility of HWT15 x 6 Split Spoke Aluminum Wheels With ST205/75-15 Tires
  • The HWT # TTWAL06156545B wheels you referenced are indeed compatible with your existing Carlisle tires. The wheels have a 5 on 4-1/2 bolt pattern and are compatible with a 1/2 inch wheel stud. I have linked you with an FAQ article that shows how to determine your wheel bolt pattern. As long as your existing wheel studs are 1/2 inch, and your existing lug nuts have the cone that centers the wheel and the bulge that centers the lug nut in the bolt hole, you can use your existing lug nuts....
    view full answer...

  • Do Trailer Tire and Wheel Combos Come Mounted and Balanced
  • Taskmaster tire and wheel combo # TTWAS12B4WMHP does come mounted already. Trailer tire and wheel manufacturers do a type of balancing where they match the heavy sot in the tire with the light spot in the wheel. Trailer tires don't really need to be balanced beyond that but you could have them balanced further at a local tire shop. The tire and wheel combos are ready to bolt onto a hub using lug nuts (not included). For a lug nut that you can use with tire and wheel combo # TTWAS12B4WMHP...
    view full answer...

  • Recommended Hub Stud Bolts for a Hub Using L64819 and L44649 Bearings
  • If your hub uses the # L68149 and # L44649 bearings included in the # BK2-100 kit, it is most likely very similar to the # 84546UC3 hub drum assembly we offer, which has a 5 on 4-1/2 bolt pattern and works with 3500 pound axles. The # 84546UC3 hub drum would accept 1/2 inch drive-in stud kit # RG03-040, which is 1-13/16 inches long. If you find that your current studs do not match the # RG03-040 kit, I recommend looking at the rest of the drive-in studs we offer, as they come...
    view full answer...

  • Are Lug Nuts # X1023R and Quick Trim Chrome Finish Trailer Hub Cover # QT655C Compatible
  • I went out to the warehouse and pulled a Trailer Wheel Lug Nut, # X1023R, and a Quick Trim Chrome Finish Trailer Hub Cover, # QT655C, and tested them together. The lug nut fits in the space but there is about 1 millimeter of a gap between the nut and where it sits in the cover. But the cover would not be able to come off as there is a lip that is more narrow where the cover first meets the nut and you have to snap it on.
    view full answer...

Do you have a question about this Accessories and Part?

  • Why

    At we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? Read our Returns Policy. Please note that we cannot exchange items. You can also cancel unshipped items. Contact our Customer Service team at 800-298-8924 to find out more about how to cancel your order.

Info for this part was:

Photos by:
Theodore B

Expert Research:
Michael L

Expert Research:
Sarah L

Expert Research:
Michael H

Installed by:
Jeff D

Expert Research:
John H

Updated by:
Adele M

Expert Research:
Adam R

Video by:
Dustin K

Installed by:
Cole B

Expert Research:
Jeffrey L

Updated by:
Sarah W

Photos by:
Stacy F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.