1. Accessories and Parts
  2. Redline
  3. Trailer Bearings Races Seals Caps
  4. Dust Cap Driver Tool
Dust Cap Driver Tool - Large - for 2.72" OD Hubs

Dust Cap Driver Tool - Large - for 2.72" OD Hubs

Item # 290-993
lowest price pledge
Our Price: $24.13
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.96 lbs
Quantity: 
In Stock
Dust Cap Driver Tool - Large - for 2.72" OD Hubs Dust Cap Driver Tool 290-993
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Call 800-298-8924 to order Redline accessories and parts part number 290-993 or order online at etrailer.com. Free expert support on all Redline products. Guaranteed Lowest Price and Fastest Shipping for Dust Cap Driver Tool - Large - for 2.72" OD Hubs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (23)
  • Q & A (6)
  • Videos (1)
  • Photos
  • Why etrailer?

Redline Accessories and Parts - 290-993

  • Trailer Bearings Races Seals Caps
  • Dust Cap Driver Tool
  • Redline


  • Large dust cap driver tool
  • Designed 2.72" diameter grease caps
    • fits #s 21-39 & 21-43-1

Custom-sized specifically for trailer axle dust caps, this dust cap driver can be used for installation, removal and servicing trailer hubs without denting the dust caps.


152425 (290-993) Redline Dust Cap Driver Tool





Video of Dust Cap Driver Tool - Large - for 2.72" OD Hubs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Dust Cap Driver Tool Review

Today we are going to review the Dust Cap Driver Tool. This tool comes in three different sizes. The one we are going to use today is for dust caps that are 1.986 inches and this is going to be part number 290-991. This is the one we are going to use on the demonstration today but notice the other two part numbers are pretty much identical accept for the diameters. Then we have got the dust cap and we are going to uses the 1.986 diameter and basically all it does is sit in place like that and use a mallet and drive it into the hub. 00:30

Lets use it in actual practice. There are a couple of ways you can do this. You can set it on there maybe give it a couple of taps just to help get it started or you can start the whole way and drive it in. It makes installing the dust cap that easy and you do not have any dents on the outside of the cap as well. With that, that will finish the review of the Dust Cap Driver Tool.


Customer Reviews

Dust Cap Driver Tool - Large - for 2.72" OD Hubs - 290-993

Average Customer Rating:  4.9 out of 5 stars   (23 Customer Reviews)


- 290-993
by:

I think it is functional, sturdy, and a necessity! Fits perfect! 865478



- 290-993
by:

Works great 787011



- 290-993
by:

Excellent tool and customer service! 782100



- 290-993
by:

Excellent quality, superior customer service. ETrailer sued makes my life easy! 713214



- 290-993
by:

Worked great !! AAAAA++++++ 698567



- 290-993
by:

it is excellent, would like to know if there is one larger available, meaning that fits larger dust cowers. 547187



- 290-993
by:

Worked good and seems made to last. 430069



- 290-993
by:

these grease cap tools work great! used on my old Plymouth without distorting the grease cap...put it over grease cap and give it a couple of whacks!..a nice tight fit..the bigger ones will work with most other truck, .suv, van grease caps!..a must tool!! Love um!! 413628



- 290-993
by:

Sure makes it easy to install the hub caps without distortion. Must have tool. 347235



- 290-993
by:

I own these in all the sizes. They're excellent quality and will keep your caps looking new, as well as making them easier to install. A great tool. 345314


Comments
I still recommend these whenever I can. I have all three sizes plus a duplicate for my boat trailer so I can keep one in the truck.
Mike F - 02/24/2018

35091

- 290-993
by:

GREAT COMUNICATION AND FAST SHIPPING! 339864



- 290-993
by:

Never seen this type of tool before. Sure keeps the dents off the dust caps 338151



- 290-993
by:

great tool! simple idea, but very effective to avoid damage to the hub cover 334913



- 290-993
by:

Great Company To Work With. 309180



- 290-993
by:

This product was exactly what I needed to install the bearing cap on my trailer wheel. I had to replace the damaged one with a new one and this did the trick. Nothing else i tried worked, so the purchase of this tool was well worth the price. 275784



- 290-993
by:

Excellent tool for cap removal and installation. I have been ruining caps for years with hammers and screwdrivers. This tool eliminates the damage and speeds hub maintenance. Worth every penny. 270302



- 290-993
by:

Product was received promptly and is exactly as advertised. I have used it for the designed purpose, and it worked well. 241089



- 290-993
by:

sturdy and reasonably priced. timely de livery 230634



- 290-993
by:

If you've ever banged up a dust cap trying to get it back on this is the tool you need! Easy and quick and DOES NOT dent the cover. I bought all 3 sizes since I work on trailers. Time saving tool and time is $$$$ 202824



- 290-993
by:

I bought all three sizes. I service a fleet of pickup trailers in the oilfields and after so many hubcaps, you'll look for something to do the job better. Reinstalling an old cap isnt too bad most of the time, new ones are where these tools shine. The majority of new hubcaps will not install easy, without some good heavy persuasion. And its just a sad sight, a bent, bruisied and beat up brand new hubcap. But this tool will make you proud. I've noticed hammering on hubcaps can lead to them actually falling off down the road (pun). And the other issue is with the cotter pin inside. If the cap is dented badly, it will rub on the cotter pin or grease zerk, if it didn't already break off. Its not easy to cause this but it is possible. Breakdown of why I bought these: 50% getting so incredibly annoyed that the cap just won't go on and being tempted to use a BFH. 30% because a newly overhauled trailer looked like h-edouble hockey sticks when I got done with it. 20% noticing hammered caps seem to fall off easier, later. These are extremely well made thus far. I was surprised how nice and heavy they were, no quality skimping here. The cup end is made of a perfect thickness, you could toss this thing around no worries. The shaft is solid or at least thickwalled judging by the weight. And the end is a separate rounded off piece just waiting for the hammer time. Note, the length I'm not sure on yet. The end sticks out just above the hand when grasping tool. Maybe nice to be an inch longer? Not sure yet. Other thing I noticed is how close fitting this is. Not a con, but just keep in mind its not gonna be good for installing old beat up caps. For removing hub caps look into SnapOns GCP10 pliers. Together, these tools are the perfect pair. 190156



- 290-993
by:

Polite helpful, quick delivery. Great service! Thank you. 173097



- 290-993
by:

It worked just like it is supposed to. There are no moving parts except for the hammer. Just be sure and keep your fingers out of the way. 121358



- 290-993
by:

GOOD product very heavy duty 110425


23
23

Ask the Experts about this Redline Accessories and Parts

  • Where to Measure a Dust Cap for a Driver Tool # 290-993
    You would need to measure the outer diameter of the end of the grease cap that fits into the hub. Driver tool # 290-993 is designed for caps with a 2.72 inch outer diameter. If there isn't one that matches the size you have a small block of wood works just as well.
    view full answer...
  • How to Remove a Trailer EZ Lube Grease Cap or Dust Cap
    EZ Lube Dust Caps, like # DC200L-DCRP, have a rubber plug that can be removed to access the zerk fitting. The rubber plug can be removed by gently prying it up with a flathead screwdriver. If your dust cap is in good condition and you want to avoid getting dents in the cover, you can use the Dust Cap Driver Tool to remove the cap. Simply slide it over the dust cap and then use the leverage created by the handle to gently pry on the cap in different directions until it begins to wiggle....
    view full answer...
  • Grease Cap Fit for M1101 Trailer with Hub Bore 2.694 Bore
    The closest size we have is 2.72 inches and is the part # RG04-120. It's going to be pretty tight but since the caps are tapered as well as most hub bores it would be your best option that will fit based on a previous customer coming back and saying this fit your exact trailer. For a drive tool you would want the part # 290-993 to make driving on the cap easier.
    view full answer...
  • Will Dust Cap Tool Work for Recessed Cap
    The Dust Cap Driver Tool # 290-992 could work despite the recess you have. It measures just about 5" long so just be sure you have a bit more length than that or there is enough room for you to be able to maneuver the tool. Also keep in mind that this tool works for grease caps that have a 2.44" outer diameter. There is also a Dust Cap Driver Tool for 2.72" Grease Caps # 290-993.
    view full answer...
  • Available Sizes of Drive-In Grease Caps and Bearing Protectors
    All of our grease caps, including standard caps, E-Z Lube caps and Bearing Buddy bearing protectors are shown on the linked page. The available size nearest to your 1.986-inch dimension are those in size 1.98-inch. The next smallest is 1.968-inch like # F001610 and the next largest is 2.047-inch like Bearing Buddy set # BB2047. We also have grease cap driver tools like # 290-992 and # 290-993. It is best to use a precision caliper like # PTW80157 to measure the hub bore.
    view full answer...
  • Dust Cap On Trailer Hub Keeps Falling Off
    If your hub ever made hard contact with a curb or something similar then it is possible that the center bore isn't true anymore. It is also possible that the cap was not driven in evenly. That coupled with centrifugal force will cause it to fall off. To drive in a dust cap evenly you can use a dust cap driver tool. We have a couple options: # 290-992 works with 2.440 inch grease caps # 290-993 works with 2.72 inch grease caps Using a driver tool will ensure that the cap is driven...
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Zack K
Expert Research:
Michael H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.