1. Accessories and Parts
  2. Rear View Safety Inc
  3. Backup Camera
  4. Multiplexer Box
Rear View Safety Multiplexer Box - 3 Channel

Rear View Safety Multiplexer Box - 3 Channel

Item # RVS-501N
lowest price pledge
Our Price: $50.64
Accessories and Parts
This item qualifies for Free Shipping
Shipping Weight: 0.95 lbs
Quantity: 
In Stock
RVS-501N - Multiplexer Box Rear View Safety Inc Backup Camera
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Call 800-298-8924 to order Rear View Safety Inc accessories and parts part number RVS-501N or order online at etrailer.com. Free expert support on all Rear View Safety Inc products. Guaranteed Lowest Price and Fastest Shipping for Rear View Safety Multiplexer Box - 3 Channel. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (1)
  • Q & A (10)
  • Videos (1)
  • Photos
  • Why etrailer?

Rear View Safety Inc Accessories and Parts - RVS-501N

  • Backup Camera
  • Multiplexer Box
  • Rear View Safety Inc


  • Rear View Safety multiplexer box
  • Allows for connection of up to 3 Rear View Safety cameras
    • To use with other systems, use RVS-501N-3
  • Screw-on connectors
  • 1-Year warranty


RVS-501N Rear View Safety Multiplexer Box - 3 Channel

Installation Details RVS-501N Installation instructions



Video of Rear View Safety Multiplexer Box - 3 Channel

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Rear View Safety Inc Backup Cameras and Alarms RVS-501N Review

Today we're going to take a look at the rear view safety three channel multiplexer control box. Now this multiplexer will connect to the fuse box in your vehicle, allows you to connect up to three cameras to your system. Has a video out connection, an RCA connection, the three camera inputs, and then back here it has three separate triggers for each camera. Does include everything shown here on the table, the multiplexer, the RCA connector and the power wiring harness with the inline fuse holder. But that should do it for the review on the rear view safety three channel multiplexer control box.


Customer Reviews

Rear View Safety Multiplexer Box - 3 Channel - RVS-501N

Average Customer Rating:  3.0 out of 5 stars   (1 Customer Reviews)


- RVS-501N
by:

CAUTION There are two models of this unit. This unit listed that ETRAILER carries does not trigger the monitor to switch on if you are using this in an RV and the display screen is your media center. You need the RVS-501N-3. The “-3” after the part # is needed for the correct unit that has a trigger wire that will activate the display screen when placing unit in reverse or using the turn signals with side cameras that is mostly used in RV’s. It has 6 wires not 5. 550316


Comments
Part # RVS-501N multiplexer box only works with reaview safety system screens. If you are using a RCA screen you would need part # RVS-501N-3.
-- Heather A - 08/17/2018

42517
Comments
Excellent
Matt - 08/05/2019

58646
2
2

Ask the Experts about this Rear View Safety Inc Accessories and Parts

  • Difference Between RVS Switchers RVS-501N and RVS-501N-3
    The Rear View Safety Switcher part # RVS-501N is for connecting to any standard cameras that use RCA connections whereas the part # RVS-501N-3 is for connecting to RVS brand cameras.
    view full answer...
  • 3 Camera Multiplexer Recommendation for RV with 3 Cameras
    The Rear View Safety Multiplexer Box - 3 Channel # RVS-501N that you referenced has a single output and trigger for the video like you need and three inputs for cameras and a trigger for each to know which to switch to. I attached a diagram that shows how it installs. This would be exactly what you setup would require assuming your problem is the multiplexer box. Which based on what you are experiencing sounds like is the case.
    view full answer...
  • Can Rear View Safety Switcher Box be Used to Add Additional Camera to Sony XAV-AX1000
    The Rear View Safety Switcher Box # RVS-501N-3 can be used to switch between three cameras and even has an input designated for a reverse camera like you already have. It selects the camera to view based on the trigger wires that you run to the wiring of the cameras.
    view full answer...
  • Older Backup Camera with Mutliplexer Box Shows Yellow or White-Out on Monitor
    What I recommend is to start by replacing the camera with something such as # VCMS17B. Basically one component at a time. So you could hardwire in a new camera to the wiring that is already installed. If the problem continues then you could move on to other components. The camera, since it is exposed to the elements, is most likely the part that needs to be replaced. Should the multiplexer box need replacing it can get a little trickier if the existing wiring you have isn't really a...
    view full answer...
  • Adding Multiplexer to RVS-619N-S System And How To Wire Multiple Cameras Constantly On
    I have the perfect solution for you! To add a multiplexer to your Rear View Safety # RVS-619N-S system you can use the Rear View Safety Multiplexer Box # RVS-501N , which is the part that is normally included in the upgraded # RVS-770619N-S system. During installation you can wire the system power into the battery to keep the cameras constantly on, so that you get a camera feed while moving forward. However, which camera is turned on is dictated by passive triggers that change depending...
    view full answer...
  • Recommended Trailer Connector for 3 Camera Trailer Connection and Ford Monitor with RCA Inputs
    For your desired connection, I recommend the Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up # RVS-2133 then use the Rear View Safety Multiplexer Box - 3 Channel # RVS-501N. This will give you the video output and the female RCA connections. If you need the RCA male you can use # RVS-RCA5-AM. You will need the Rear View Safety Splice Kit # RVS-SPK01 to convert from 4 pin to 5.
    view full answer...
  • Parts Needed To Use a Rear View Safety Backup Camera Part RVS-770
    In order to use the Rear View Safety Backup Camera part # RVS-770 you would need to obtain the following: Rear View Safety Backup Monitor part # RVS-6137N Rear View Safety Multiplexer Box part # RVS-501N Rear View Safety Trailer Tow Quick Connect Kit part # RVS-213-613 Unfortunately, there would be no way use to use the above camera with the factory monitor in your 2018 Ram 2500. I am also not aware of another camera system that will mount on the trailer and allow you to use the...
    view full answer...
  • Observation Camera Connection to Ford Onboard Digital Navigation Display
    The Furrion RV Observation Camera System # FOS43TASF will not allow you to use your Ford Onboard Navigation Display. The Furrion monitor has a transmission receiver that pairs with the camera and there is not an output from the monitor, so the system will require use of the monitor. To ensure a connection to your dash monitor, you may need to hardwire a system like the Rear View Safety Backup Camera - Heated - Night Vision - RCA Connectors # RVS-812N and Rear View Safety Multiplexer...
    view full answer...
  • Recommended Camera For 2017 Ram 1500 Factory Reverse Camera System
    It sounds like you are looking to add a second camera, so in order to do so you will need to add a Rear View Safety Multiplexer Box - 3 Channel # RVS-501N to switch between your cameras as I don't believe your system has multiple camera options. For a camera, I recommend the Rear View Safety Backup Camera for Pickup Trucks # RVS-TAILGATE. You will also need the Rear View Safety Camera Cable - 21' Long - Double Sided Female Connections # RVS-882. I am not familiar with the inputs so you...
    view full answer...
  • Can Second Camera be Added to the 7 Rear View Safety Backup Monitor
    You can add up to 3 cameras to the 7" Rear View Safety Backup Monitor # RVS-6137N if you use the Rear View Safety Multiplexer Box # RVS-501N. The Rear View Safety Backup Camera # RVS-771 comes with all of the wiring and mounting brackets that you need to connect an additional camera to this monitor.
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Sarah W
Updated by:
Hannah L
Written by:
Daron K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.