Rack'em Load Stop for Ladder Rack

Ask the Experts about this Rackem Accessories and Parts

Do you have a question about this Accessories and Part?

• How Many RackEm Fitz-All Enclosed Trailer Ladder Racks Are Needed For 6 X 12 Aluminum Trailer
  
• I called my contact at RackEm and asked about the Fitz-All Enclosed Trailer Ladder Rack, part # RA-28 and your all aluminum trailer. They told me that two sets would be ideal for your trailer since it is 12-ft long and the load capacity would be increased but how much more it can carry depends on the trailer construction. Many trailers have aluminum shells but have steel beams on the inside. They told me that per the instructions if you are installing this through aluminum only it is...
  view full answer...


• Recommended Load Stops for the Rackem Fitz-All Enclosed Trailer Ladder Rack Part # RA-28
  
• I am not sure what you mean by a cargo bracket but we do have the Rack'em Load Stop for Ladder Rack part # RA-28-S which is made specifically for the Rack'em Fitz-All Enclosed Trailer Ladder Rack part # RA-28. The CargoBuckle Ladder Rack Tie-Down Straps part # IMF18816 would also work well for you. We have not had any customers report back to us on using this particle tie-down with your ladder rack but we have had them use them on very similar ladder racks and due to its universal designed,...
  view full answer...


• Rooftop Ladder Rack and Ladder Recommendations for 16-Foot Enclosed Trailer
  
• As long as your 16-foot enclosed trailer has rain gutters on its roofline then the Rack'Em Fitz-All Enclosed Trailer Ladder Rack # RA-28 is an excellent choice. This heavy-duty adjustable aluminum rack telescopes to fit trailers up to 8-1/2-feet wide and offers a 400-lb weight capacity. The required stainless steel installation hardware is included and at right you'll find a link to an installation video that may be helpful to you. Load stops, part # RA-28-S, are offered for this rack as...
  view full answer...


• Are 2 Load Stops Included with Rack'em Load Stop for Ladder Rack Item # RA-28-S
  
• Yes, Rack'em Load Stop for Ladder Rack Item # RA-28-S comes in a set of 2.
  view full answer...


• What Is Weight Capacity For Rack'em Fitz-All Enclosed Trailer Ladder Rack
  
• The weight capacity for the Rackem Trailer Cargo Control, part # RA-28 is listed at 400 lbs. This is the weight capacity for the complete rack, and not just one bar. When installing you need to make sure you have a solid place to secure the mounting tabs. The tab dimensions are 8-1/4 inches long x 1-1/2 inches high x 1/4 inch thick. I have attached a link to an installation video for this rack system you can check out. If you need load stops for the ladder rack I recommend the Rack'em...
  view full answer...


• Will the Ladder Rack for Enclosed Trailers Fit My 6 foot by 12 foot Haulmark Trailer
  
• Yes, the Rackem Fitz-All Enclosed Trailer Ladder Rack, part number RA-28 will fit your 6 foot wide trailer. The rack installs easily to the trailers rain gutters and fits all trailer brands. These racks are sold as a set which includes 2 load bars and installation hardware. You may also want to consider the Rackem Load Stop for Ladder Rack, item # RA-28-S, to help secure loads on the ladder rack system.
  view full answer...


• Is a Third Bar Necessary with the Rack'em Fitz Enclosed Trailer Ladder Rack part # RA-28
  
• As long as your stay under the 400 lb capacity of the Rack'em Fitz Enclosed Trailer Ladder Rack part # RA-28 you would not need to install any additional crossbars. Check out the installation video I attached. For load stops you may also be interested in the Rack'em Load Stop part # RA-28-S.
  view full answer...


• What Kind of Metal is the Rack em Fitz-All Enclosed Trailer Ladder Rack # RA-28 Made Of
  
• Yes, this Rack em Fitz-All Enclosed Trailer Ladder Rack, part # RA-28, is made of aluminum and uses stainless steel screws. You may also be interested in purchasing Rack em Load Stop for Ladder Rack, part # RA-28-S. I attached installation instructions for the # RA-28 below for you to check out also.
  view full answer...


• Load Capacity for Rackem Fitz-All Enclosed Trailer Ladder Rack
  
• The weight capacity for Rackem Fitz-All Enclosed Trailer Ladder Rack part # RA-28 at a 7 ft width is 400 pounds. These racks are designed for fiberglass ladders, if you need more capacity another set can be added to spread the weight out more.
  view full answer...


• Recommended Trailer Ladder Rack for Transporting 100-lb Canoe
  
• We can help you with a solution for carrying your 15-foot canoe on the roof of your trailer. Rack 'Em offers their Fitz-All heavy-duty extruded aluminum ladder rack # RA-28 which offers a 400-lb weight capacity but which itself weighs only about 20-lbs. Stainless steel mounting hardware is included. This rack fits trailers that have a rain gutter. With it you can use two of their Load Stop kit # RA-28-S to secure the canoe from moving. A lower-cost option is the Swagman Roamer LT...
  view full answer...


• Will The Rackem Fitz-All Enclosed Trailer Ladder Rack Be Able To Carry 2 Loading Ramps
  
• The weight capacity of the Rackem Fitz-All Enclosed Trailer Ladder Rack, part # RA-28 has a weight capacity of 400 pounds. You would need to weigh the loading ramps to determine if they weigh less than the 400 pound capacity of part # RA-28. In addition to part # RA-28, I would also recommend Rackem Load Stop for Ladder Rack, part # RA-28-S, which is designed to keep the cargo on the Rackem Trailer Ladder Rack stabilized.
  view full answer...


• What Material is the Rackem Fitz-All Enclosed Trailer Ladder Rack # RA-28 Made Of
  
• I spoke with my contact at Rackem and he stated that the Fitz-All Enclosed Trailer Ladder Rack, # RA-28, is all aluminum and the screws are stainless steel. The color of the rack is as it appears in the pictures on the product page; a brushed aluminum silver is how I would describe it. I have included a link to the installation details for reference. The ladder stops, # RA-28-S, are sold separately.
  view full answer...

Do you have a question about this Accessories and Part?