3" Tall x 45" long ramp extensions work in conjunction with 56" Race Ramps to create a lower incline for your low-ground-clearance vehicle. Ramps decrease the angle of approach from 10.8 to 6.6 degrees. Fit tires up to 10" wide.
Features:
Specs:
Race Ramps XTenders work in conjunction with 56" Race Ramps to create a lower incline for your low-ground-clearance vehicle. The ramp extensions reduce the 10.8 degree angle of approach of 56" Race Ramps to 6.6 degrees, which allows you to lift your vehicle without worrying about scraping its front end. Once your vehicle is in place, the XTenders can be removed for more access to your vehicle's undercarriage.
These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each ramp supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs. They are lightweight, weighing no more than 10 pounds per ramp, so you can transport and store them with ease.
The ramps are covered with a textured coating. This keeps them from skidding when you drive up on them. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today we're gonna take a real quick look at these extenders for race ramps. These ramp extensions are going to work in conjunction with your 56 inch long race ramps to create a lower incline for your low ground clearance vehicle. Now, these are compatible with 56 inch long race ramp car service ramps identified by the model numbers that you see there on your screen. So these extensions are going to lay on the ramps inclines as you see there in that photo to reduce the angle of approach from 10.8 degrees all the way to 6.6 degrees.
And these are going to fit tires up to 10 inches wide. So these are going to be perfect for very low ground clearance vehicles. These are made here in the USA of an ultra strong high density EPS foam construction which will ensure durability and stability. The solid core foam is not going to bounce or crack and they have a total weight capacity of 3,000 pounds. So each ramp has a capacity of 1,500 pounds.
They're lightweight, they're easy to use, easy to transport and store. And let me give you a closeup here, right here near the center to just show you the textured coating that these have. That coating is going to prevent these ramps from slipping or sliding. It's gonna resist water and automotive fluids so they're not gonna scratch, they're not gonna mark or scrape up your floor. Now, let me go over some measurements with you.
Looking at the overall length of these extensions, looks like we're sitting right at about 45-1/2 inches long. Looking at the width, sitting right at about 12 inches wide. And again, as I mentioned, these are going to work with your 10 inch wide tires. And then looking at the overall height, let me go for another close up there, see if I can line that up for you, at the tallest point, we're sitting pretty close to three inches tall. It looks like at the tallest point.
Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.8 out of 5 stars (17 Customer Reviews)
3" Tall x 45" long ramp extensions work in conjunction with 56" Race Ramps to create a lower incline for your low-ground-clearance vehicle. Ramps decrease the angle of approach from 10.8 to 6.6 degrees. Fit tires up to 10" wide.
I like the weight of the ramps and they are perfect for what I need them for.
Fast delivery
Very fast shipping, great updates throughout the entire order. Will definitely purchase from etrailer.com
again!!
These extensions are required to roll a GT350 onto the 67" race ramps.
High quality ramps at a solid price. Happy customer here, thank you
Works great and is very light weight.
I’ve owned these for a year and used them for my C7 Vette. They work perfect!!
I also used the Race Ramps for my wife’s Honda CRV, my daughters Honda Accord - awesome! So much easier and safer than jacks!!
I already own a set of race ramps. I lowered my car and wanted the extenders too. etrailer had the best price I could find.
Love my Race ramp Xtenders. Have been using them for over one year as extensions for the ramps on my four-post car lift in my garage. No worries now when driving very low profile vehicles onto my lift. They are amazingly strong and their light weight makes them very easy to store. I highly reccommend them!
These ramps work nicely with my low clearance car getting it on/off my trailer. They reduce the angle and allow the nose of the car to be high enough not too hit the ramp and help it not high center.
My second order with etrailer and both transactions were outstanding. Fast delivery, friendly communications. Highly recommend to anyone!!
Product works as designed.
I am testing it now for each of my cars.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.