Foot Pump for Presta and Schrader Valves - High Capacity - 100 psi - 24" Long Hose

Video Transcript for Review of Performance Tool Tools - High Capacity Foot Pump - PT28ZR

Jeff : Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this high-capacity foot pump with the adapter, for the Presta and Schrader valves. And this foot pump has 120 PSI max pressure. Now this foot pump will let you inflate tires, pools, air mattresses, sports equipment, water toys, and many more items. This pump here, if I unlatch it, it will release the foot pump you can see.

It'll use an oversized 350 milliliter capacity barrel. And that'll deliver twice the amount of air per pump than your standard foot pumps. And again, when you're not using it to store it, all you have to do is push it all the way down. Take this loop, put it up on there and it'll hold it in the closed position. And then just like that, you can release it.

That does come with this 24 inch long hose with the locking valve on the end.And the adapter we mentioned that will fit the Presta and Schrader valve stems. This adapter is always located. It's stored right here in the lever handle and it'll screw on to a Presta valve and allow you to inflate it like a normal Schrader valve. Just want to zoom in to show you there's the adapter. And when you get it, it'll be stored right in that lever, just like that, a locking lever.

Now this will also include these three air pump inflation adapters. The normal needle valve, a small nozzle adapter, and a larger nozzle adapter. As we mentioned, this has a maximum pressure of 120 PSI. A normal working pressure of zero to 100 PSI. Also what's nice, if you look at the dial.

Has the nice large numbers on the face that make reading the pressure easier when you're standing above it and pushing down on the pump, you'd be able to see what the pressure is.Also on the very bottom right here, it has these nice rubber feet that provide stability during operation. And as we showed you earlier, this metal loop right here, blocks the pump in the storage position. Just like that. But that should do it for the review on the high capacity foot pump with the adapter, for the Presta and Schrader valves. And it has 120 PSI max pressure.