1. Accessories and Parts
  2. Packem
  3. Trailer Cargo Organizers
  4. Enclosed Trailer Parts
  5. Ladder Rack Parts
  6. Brackets
Ladder Rack Bracket Kit for Pack'em Enclosed and Utility Trailer Towers - Qty 2

Ladder Rack Bracket Kit for Pack'em Enclosed and Utility Trailer Towers - Qty 2

Item # PK-28WL
lowest price pledge
Retail:$204.98
Our Price: $107.01
You Save: $97.97
Accessories and Parts
This item qualifies for Free Shipping
Shipping Weight: 10 lbs
Quantity: 
In Stock, Ships Today
PK-28WL - Ladder Rack Parts Packem Accessories and Parts
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

These brackets work with Pack'em towers (sold separately) to create a ladder rack for the side of your trailer. Brackets can also be added to rack so you can carry a second ladder. Includes 2 brackets and 4 bungee cords. Call 800-298-8924 to order Packem accessories and parts part number PK-28WL or order online at etrailer.com. Free expert support on all Packem products. Guaranteed Lowest Price and Fastest Shipping for Ladder Rack Bracket Kit for Pack'em Enclosed and Utility Trailer Towers - Qty 2. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (4)
  • Q & A (1)
  • Videos (2)
  • Photos
  • Why etrailer?

Packem Accessories and Parts - PK-28WL

  • Trailer Cargo Organizers
  • Enclosed Trailer Parts
  • Ladder Rack Parts
  • Packem
  • Brackets

These brackets work with Pack'em towers (sold separately) to create a ladder rack for the side of your trailer. Brackets can also be added to rack so you can carry a second ladder. Includes 2 brackets and 4 bungee cords.


Features:

  • Bracket kit works with Pack'em towers to create a ladder rack for the side of your trailer
    • Can be used to transport pipe, conduit, or similarly sized gear
    • Requires tower kit (PK-BM - sold separately) for installation on enclosed trailers
    • Requires tower kit (PK-BMH - sold separately) for installation on open air trailers
  • Add to an existing ladder rack (PK-28WL-BM or PK-28WL-BMH - sold separately) to carry a second ladder
  • Welded gusset provides anchor point for a lock and chain (not included) to secure your ladder
  • Sturdy steel construction with gray powder coat finish resists rust
    • Unique hammered pattern adds a touch of style
  • 2 Brackets, 4 bungee cords, and mounting hardware for enclosed trailers included
    • Additional mounting hardware may be required for installation on open air trailers


Specs:

  • Application: ladders up to 6-1/4" wide
  • Weight capacity: 75 lbs
  • Mounting bolt dimensions: 5-1/16" long x 1/4" diameter
  • 1-Year limited warranty


PK-28WL Pack'Em Ladder Rack Brackets for Enclosed and Utility Trailers





Video of Ladder Rack Bracket Kit for Pack'em Enclosed and Utility Trailer Towers - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Pack Em Ladder Rack Installation

Today in our trailer we'll be having a look at the Pack'Em Ladder Rack for Exterior Side Wall of Enclosed Trailers, part number PK-28WL2-BM. All right, here's what our ladder rack looks like when we have two ladders installed on it. As you see, we're using step ladders and we alternated them, so we could actually clear both our ladders over our fender properly. Now, the main reason you want a ladder rack like this, is on an enclosed trailer, sometimes you don't have the necessary room inside for your long ladder, especially if you have an extension ladder. This will allow you easy access to your ladder and still have all the room inside your trailer to have your construction equipment and your construction supplies. Now this kit's designed to store up to two ladders on the outside of your trailer. Right now we just have the one installed with the one set of arms. Now, you can adjust how your ladders are stored on the rails at various heights depending on the size of your ladder or the shape.

You can go up higher if you need to, or down lower if you need to. Now for convenience, our ladder rack comes with eight bungee cords in order to secure the ladders to the rack. We have four 12" ones, and four 18" ones. Now, for added security and to help prevent theft of your ladders when installed on the rack, you can use a cable lock with a padlock to secure them on down. We have several of those options available on our website. Now one of the great features about this is our ladder is easily removable.

We just undo our bungee cords. Here our ladder rack is 46-1/2" tall, and will accommodate ladders that are up to 6-1/4" wide. Now our ladder rack is also available as a single kit to hold a single ladder. So basically it'll be like what we have on the trailer already right now. Only difference being, you won't get your second pair of legs to rest your ladder onto. Your bungee cords, instead of having four of the 12" and four of the 18", you'll have two of each. Now that we've gone over some features of our ladder rack, we'll show you how to get it installed on our trailer.

First thing we want to do is find out where the studs are on our trailer wall. If you look down here on the side, we have multiple rows of screws that attach to the side of our trailer. These go straight into the studs on the interior wall. This is where we're going to want to attach our rails. Now we need to find a good location for them to space them properly for our ladder use.

We're going to have our back one here, right behind our fender. For our front one here, we will install it right behind where this vent is. That way our ladders won't interfere with the vent. Now we need to mark where we're going to draw our holes at. We'll just get it right in line, up against the roof line here, and we'll make a mark right here in the middle. We'll do the same for our bottom bolt location. We'll do the same for our front rail. Now we'll draw out a pilot hole where we marked. Okay, we'll go ahead and draw the other pilot holes for the front and the rear rails. With our pilot holes all made, we'll now drill them out using an 11/32 drill bit. Now we'll take our long threaded bolt and one of our flat washers and we'll put it on. We'll take one of our wide washer plates, place it on the bolt, and then we'll raise it in position and go through the hole. Now on the inside of our trailer, we'll place on our smaller plate washer, a round washer, and then our nylon lock nut. We'll do the same here for our bottom. We have an extra set of hands on the outside of the trailer holding the bolt in place with a wrench while we tighten down the nut. We'll do the same on the bottom one now. We'll double check our top one now and make sure its snug. With that done, we'll repeat the same process for the front row. Now we'll take our lateral arm, our reinforcement plate, one of our shorter bolts, slide it in position, run the bolt on through, place another bolt in, and we'll thread on our nylon lock nuts, and then we'll snug our hardware on down. We'll go to the front rail and do the same at the same position. All right, now if you have an excessive amount of bolt sticking through on your inside wall of your trailer here, you can actually cut this off with a grinder, so you can maximize the amount of room inside your trailer for storing stuff against the wall. You don't have to worry about running into it either. I'll repeat the same process for our front rail. That completes our look at the Pack'Em Ladder Rack for Exterior Side Walls of Enclosed Trailers, part number PK-28WL2-BM.


Customer Reviews

Ladder Rack Bracket Kit for Pack'em Enclosed and Utility Trailer Towers - Qty 2 - PK-28WL

Average Customer Rating:  5.0 out of 5 stars   (4 Customer Reviews)

These brackets work with Pack'em towers (sold separately) to create a ladder rack for the side of your trailer. Brackets can also be added to rack so you can carry a second ladder. Includes 2 brackets and 4 bungee cords.

- PK-28WL
by:

Great look and very well made 605217



- PK-28WL
by:

matter o fact i'm going to order more right this second! 543341



- PK-28WL
by:

Very heavy duty right product 459691



- PK-28WL
by:

I'm sure most of us could get by with making our own trailer organizing system...but what the hell for?! These guys perfected the designs. Stop screwing around and do things right the first time. Reasonable prices and fast shipping. Hope it helps you as much as it has helped me. 446075


4
4

Ask the Experts about this Packem Accessories and Parts

  • Ladder Rack With Higher Transport Height than Pack'Em Ladder Rack or Extensions
    The Pack'Em Ladder Rack for Side Rail of Open Air Trailer - 2 Ladder # PK-28WL2-BMH is 46-1/2" tall x 2" wide x 1" deep, so anything taller would require customization as there isn't an extension designed for this system. If you want just the holders so you can customize the height, I recommend the Ladder Holder for Pack'Em Towers - Enclosed Trailers and Open Air Trailers # PK-28WL. For additional tower length you can add the Heavy-Duty Towers for Pack'Em Ladder Rack or Rack'Em Blower...
    view full answer...



  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Installed by:
Jeff D
Written by:
Daron K
Updated by:
Erin H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.