Chrome Accent Ring for STL78 and BUL78 LED Series Trailer Lights
(52 reviews)
Price: $4.99
In Stock
Chrome Accent Ring for STL78 and BUL78 LED Series Trailer Lights
Item # A78CB
Our Price: $4.99
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (52)
- Q & A (14)
- Videos (1)
- Photos
- Why etrailer?
Optronics Accessories and Parts - A78CB
- Trailer Lights
- Mount Parts
- Optronics
- Mounting Brackets
- Chrome
Chrome Accent Ring for STL78 and BUL78 LED Series Trailer Lights
A chrome accent ring for STL78 and BUL78 Series lights. This chrome cover measures 7-7/8" long x 3-5/8" wide x 1/2" deep. The polished, chrome-plated finish of this cover greatly improves the looks of these LED lights. The snap-on feature of this cover makes it easy to install and keeps it firmly in place.
Manufacturer Specifications
Snap on ring enhances appearance of STL78 or BUL78 series LED lights.
A78CB1 Chrome Accent Ring for STL78 and BUL78 LED Series Trailer Lights
A-78CB Chrome Ring by Optronics, Inc.
California residents: click here
Video of Chrome Accent Ring for STL78 and BUL78 LED Series Trailer Lights
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Trailer Lights A78CB Review
Today we're going to take a look at the chrome accent ring for the Optronics STL78 and BUL78 LED series trailer lights. This is a snap-on chrome accent ring for the STL78 and BUL78 series LED lights. It's a nice polished, chrome plated finish on this ring. Greatly improves the looks of the LED series lights, and it is a snap-on feature of this cover. Makes it real easy to install, keeps it firmly in place. Give you a few dimensions on this. We're going to do the overall length from this edge to this edge. You can see, it's going to be right at 7 7/8 inches long.
The width on it from the very bottom to the very top is right at 3 5/8 inches wide. It's about a 1/2 inch in depth. Now what I want to do is I happened to pull here's the STL78 LED series trailer light, and here's the BUL78 series light. I just wanted to show you when you install these you can see here's your four mounting points. Right where those are, there's a little indentation. All you have to do is take your snap-on ring, set it right over there, push it right into place.
There you can see, it gives a nice clean finish. Covers up the mounting holes. You can do the same on the BUL78 series. Same way it has the mounting holes with the little indentations. Just go ahead and take your chrome ring, and it pops right over there. Gives you a nice finished look to your trailer. That should do it for the review on the chrome accent ring for the Optronics STL78 and BUL78 LED series trailer lights..
Customer Reviews
Chrome Accent Ring for STL78 and BUL78 LED Series Trailer Lights - A78CB
Average Customer Rating: 4.8 out of 5 stars (52 Customer Reviews)
- A78CB
by: Rich05/26/2021
Obviously, the new ones look great. However, they don't fit as snugly around the replacement lights as the old ones fit on the old lights.
- A78CB
by: J. Rich01/28/2014
One of my Chrome Taillight trim covers fell off on the freeway. Found it online at Etrailer and order it. To my amazement it was delivered in a few days. Etrailer sent notifications of the entire process keeping me confident and informed that my part was on its way. Etrailer will get all my business due to Price and Service! Outstanding Job Guys Thank you!
- A78CB
by: RAM12/12/2017
Worked great as a replacement for OEM that was no longer available for RV. I also replaced the back side marker lights so the front and back matched. Pat C did a great job in completing my order with substitution for out of stock resistor.
- A78CB
by: EdO09/16/2016
It literally was a "snap" to install. Love dealing with Etrailer.com.
- A78CB
by: Kevin08/02/2020
Perfect fit. Item was as described. No problems with shipping.
- A78CB
by: Michael06/06/2021
Fits perfectly. Thanks
- A78CB
by: Stephen06/07/2021
- A78CB
by: Stephen06/07/2021
- A78CB
by: Robert.S10/06/2020
Looks like the day I got them after one year on my trailer. Thanks etrailer
- A78CB
by: Johnathon03/29/2021
Part was as expected and fit as it shou ld.
- A78CB
by: Lance05/06/2021
- A78CB
by: Don05/18/2021
- A78CB
by: Kendall04/03/2020
Product looks great attached to the lights, small diameter and low profile screws need to used to avoid clearance issues when snapping to light, one latch clip on two of the four trim rings I ordered were bent back, fixed with some super glue. Two more clips broke while trying to remove the trim ring from the light also fixed by superglue, not very durable clips, the trim plastic is light and shinny remains to be seen how durable they will be in the elements
- A78CB
by: Yvonne03/30/2021
- A78CB
by: Jayme09/06/2020
Perfect match to what I had on my truck, shipping was fast, easy to install
- A78CB
by: Robert03/16/2021
- A78CB
by: Ted02/13/2021
- A78CB
by: John11/16/2020
GREAT
- A78CB
by: TerryL07/14/2015
Product was exactly what I was looking for and a perfect with my trailer tail lights. Package arrived sooner than reported. Super fast at filling my order.
- A78CB
James - 05/10/2019
by: James05/10/2018
perfect cover for the marker lights, dresses them up so they stand out
Comments
All the products are performing great...........very happy
James - 05/10/2019
- A78CB
by: T06/11/2012
As described, excellent customer service and all my parts arrived in 2 days. Etrailer.com will get all my future business.
- A78CB
by: Mike S.04/15/2013
I was very pleased with prompt delivery and service from you. The products were exactly as pictured on your website and fit my cargo trailer just right. Thank you.
- A78CB
by: Terry04/07/2018
I wanted to replace my rings due to salt discoloration, and these are perfect and they shipped them to me very quickly. Great product and super duper customer service!!!!
- A78CB
by: Kris04/21/2020
Great product works exactly as describe d.
- A78CB
by: Phil05/18/2011
These trim rings are perfect. they will really dress up the lights for the trunk. (purchased lights and trim ring as auxillary lights on an aftermarket hard trunk for my Harley Davidson.)
25
52
Show More Reviews
Ask the Experts about this Optronics Accessories and Parts
- Will Chrome Accent Ring A78CB Fit Oval LED Trailer Stop, Turn, Tail Light # STL88RCBYes, you can use Chrome Accent Ring, # A78CB, with Oval LED Trailer Stop, Turn, Tail Light # STL88RCB.The accent ring is listed as a related part on the light product page.
view full answer... - Chrome Ring for the Optronics Part # STL88RCBWe have what you want but the part # A78CB will not fit instead use the Chrome Base for MCL78/88 Series part # A79CB. Check out the video on it I have linked for you.
view full answer... - Do Optrionics LED Trailer Light # STL78RB Come as a Set or Sold Individually?The Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diode - Oval - Red Lens # STL78RB is a single light. If you want a set, you will need to change the quantity box on the product page when ordering. I've attached a photo of the dimensions of the light as well as the mounting hole locations to assist. You may also be interested in the accent ring # A78CB or reflector # A78RXB which snap on to cover the mounting screws.
view full answer...![Image 1 for]()
- GloLight LED Tail Light Compatibility with 2018 Coachmen Clipper ST108The GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Red Lens # STL178RFPB is most likely a fit for your 2018 Coachmen Clipper ST108. The best way to confirm fit is to check the mounting hole locations. The mounting holes are 7 inches on center and 2-11/16 inches on center. I've attached a photo to assist. Then you can use the Snap-on Reflector Ring for STL78RB Series LED Lights - Red # A78RXB, the chrome ring # A78CB, or the stainless steel trim...
view full answer...![Image 1 for]()
![Image 2 for]()
- Correct Chrome Trim Ring for Optronics LED Trailer Tail LightYes, the Chrome Accent Ring part # A78CB will work with the Optronics LED Trailer Tail Light part # STL78RLPB.
view full answer... - What is the Power Draw For Sealed, 6-1/2 Inch Oval LED Trailer Utility Light, # BUL78CBThe Sealed, 6-1/2 Inch Oval LED Trailer Utility Light, # BUL78CB, as a whole, draws 0.080 amps at 12.8 volts. To determine watts, you would take amps and multiply by volts to get 1.024 watts consumed. You may also be interested in Chrome Accent Ring, # A78CB, to provide a little dress up and some extra protection.
view full answer... - Chrome Accent Ring For Optronics Trailer LightWe do carry a snap-on accent ring for the Optronics LED Stop/Turn/Tail Light, part # STL78RB. I pulled both the tail light and a snap-on accent ring, part # A78CB. This accent ring is a perfect fit for the tail light. It measures 7-7/8 inches long and 3-5/8 inches wide. If you prefer the reflector ring then use Snap-on Reflector Ring for STL78RB Series LED Lights - Red # A78RXB.
view full answer...![]()
- Light Output in Lumens of Optronics Oval LED Utility Light # BUL78CBThe output of the Optronics Oval LED Trailer Utility Light # BUL78CB is 125 Candela, according to my contact at Optronics. At a 1 foot distance, the candela output is equal to the output in lumens. There is a chrome accent ring available for this lamp, it is part # A78CB.
view full answer... - Chrome Ring Cover for Optronics LED Trailer Tail Light STL88RCBWe do have the chrome ring cover you need for the Optronics LED Trailer Tail Light # STL88RCB. The correct part is the Chrome Accent Ring # A78CB.
view full answer... - Compatibility of Optronics Glo Light LED and Chrome Accent Trim RingI reached out to my contact at Optronics and was able to confirm that the GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - Oval - Red Lens - Hardwire # STL178RB is compatible with Chrome Accent Ring for STL78 and BUL78 LED Series Trailer Lights # A78CB. They will fit together perfectly.
view full answer... - Is a Rubber Grommet Needed to Install Optronics Oval 10-LED Trailer Utility Light # BUL78CBThe Optronics Oval 10-LED Trailer Utility Light, part # BUL78CB, is made with a built-in mounting flange for surface-mount installation where there is no cut-out for the fixture. This item includes both ground and positive wire leads that exit from the rear of the housing. This product does not require a rubber mounting grommet as do some similar products from Optronics, although we do offer a snap-on chrome-finish accent ring for it, part # A78CB. For example, their # BUL72CB is a similar...
view full answer...![]()
- Optronics Oval LED Trailer Light Recommendation for a 53 ft Enclosed TrailerThe Sealed, 6-1/2 inch Oval LED Trailer Utility Light # BUL78CB that you referenced would be an excellent choice to provide lighting on a trailer to help with night time loading. Since it is an LED light it would not put an excessive load on your trailer wiring either. Check out the review video I attached for this light also. If you wanted to dress up the appearance of the light you could get a Chrome Accent Ring # A78CB also.
view full answer... - Is Optronics Oval LED Trailer Turn/Signal/Parking Light # STL78AB Surface MountedYes, the Sealed, 6-1/2 Inch Oval LED Trailer Turn Signal and Parking Light, Flange Mount, 10 Super Diode, # STL78AB, is a surface mount light. The only holes will be for the hardware to mount the light on the motorhome. You may also be interested in the Chrome Accent Ring, # A78CB, to add a little quick and easy dress up to the lights and motorhome.
view full answer... - LED Side Marker Lights to Replace Truck-Lite Model 60s on a Pumper TruckThe LED side marker/turn signal light that is comparable to your Truck Lite model 60 is our Optronics LED lights part # STL78AB. It's 7-9/16 L x 3-5/16 W x 3/4 D. It's a flange mount as well as it is sealed, waterproof and corrosion resistant. Your current marker light, such as part # BU70CB, is 6-1/2 L x 2-1/4 W x 2-3/8 D. You may also be interested in the Optronics chrome accent ring, part # A78CB, to add a little quick and easy dress up to the lights and your Pumper. I included...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Michael H
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.