Replacement X-Connect Battery Clamps w/ M10 Eyelets for NOCO Genius Battery Chargers

Video Transcript for Review of NOCO Replacement X-Connect Battery Clamps - NOC96ZR

Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this NOCO replacement X-Connect battery clamp. This is going to replace lost or damaged battery clamps for your NOCO Genius battery charger. It will work as a direct replacement for the model numbers that you see on the screen there. So if you have any of those NOCO battery chargers this is going to be the direct replacement from NOCO, so you can trust it's gonna fit right in place of the original.

You're not gonna need to worry about compatibility issues or anything like that. It is going to have your X-Connect female input here. And then your output is either these battery clamps or you can use the Allen key here to take the clamps off and you'll have the M10 eyelets that will hard mount to your battery terminals. But the clamps are the overmolded clamp with the spark-proof technology that's gonna grip tightly onto any battery terminal. They do have rugged connectors that are going to be impact water, dirt, and UV resistant.

The needle nose profile offers a clamping range up to one and a half inches. Our wire is a 16 gauge wire. We do have the 20 amp micro blade fuse built in. That's gonna help protect the electronics from surges and dangerous overloads. Kind of difficult to get in there to show that fuse but you can see the fuse holder there.

This does have an overall cord length of about 24 inches to those eyelets. If we include the clamps, it's gonna be overall about 27 inches. Our post span here, right out of the box we're gonna be about 24 inches from nose to nose of overall reach, so if our posts are a little farther apart, we can do that. Or we can pull these wires apart here all the way down to the X-Connect plug, and that will give us approximately 50 inches of post span there. So if they're really far apart, you can still accommodate that.

So a couple different ways to get this mounted with either the eyelets or with the clamps there. But it is going to be an exact replacement for your NOCO Genius battery chargers that we mentioned earlier. So, if you are needing to replace that original set of battery clamps, then this is gonna be exactly what you need. And that completes our look for today. Again, I'm Michael with etrader.com. Thanks for watching..