Replacement Drums for M-3 Dual Ramp Springs - Left and Right Hand

Video Transcript for Replacement Drums for M-3 Dual Ramp Springs Review

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at these M3 Replacement Drums. Now, this is going to replace the left hand and right hand drums for your M3 Enclosed Trailer Ramp Springs. And on your screen, I am including the model numbers of those springs that these drums are going to fit. And just to give you the further confidence that this is going to work for you, let me give you some measurements here.

Looking at the overall width, we're sitting right at two and a half inches. And the width of the threaded portion is one and seven 16ths inches. And then the width of the groove portion is one and seven eighths inches. The overall diameter, we're sitting right at about four and three quarters inches. And that inner diameter, line that up, we're sitting right at about an inch there.

Kind of hard to line that up there for you, so you can see with the camera. There you go. Now, I do wanna point out that it is recommended that only individuals who have experienced winding torsion springs install these drums. If you have not worked with the torsion spring system before, we do recommend contacting a local garage door company to install this system. These drums are the direct replacement from M3, so what that means for you is you can proceed with confidence, knowing that these are going to replace the ones that you are looking to replace, whether they became damaged, or what have you.

This is going to be exactly what you need. You're not gonna have any compatibility issues, fitment issues, or anything like that. So if you are needing to replace the left hand and right hand drums for your M3 Enclosed Trailer Ramp Springs, this is gonna be exactly what you need. That's gonna wrap up our brief look today. I do hope that it was helpful for you.

Again, my name is Andy. Thank you for joining me.