Mount-n-Lock Heavy-Haul'r Adapter Brackets for 6" RV Bumpers - Qty 2

Video Transcript for Breaking Down the Mount-n-Lock Heavy-Haul'r Adapter Brackets for 6" Replacement RV Bumpers

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the mount and lock heavy hauler RV bumper adapter brackets for the six inch RV bumpers. Now these brackets here will bolt to your six inch RV bumper and allows you to mount your four inch square RV bumper accessories to your large bumper. This will give you the flexibility to pick from many of the four inch square two bumper accessories on the market today and then easily adapt them from use with your larger six inch RV bumper. These are a very simple installation. Does not require any drilling.

It's just a bolt on installation. As you can see, it includes all the mounting hardwood to install them. They are a powder-coated steel construction, very strong, resists corrosion and they are made in the USA. This is for a quality of two brackets. Now the maximum capacity per bracket is 200 pound foot and a pound foot is equal to one pound, supported one foot away from the support point.

So the bracket here will support 200 pounds, one foot away from the support point. These do weigh about three pounds total. And the last thing I'm gonna do, is just give you dimensions on the bracket, on one of them. The length, one end to the other, eight and a half inches long. The height, six and a quarter inches tall and the width is right at one and a half inches wide.

But that should do it for the review on the mount and lock Heavy Hauler RV bumper adaptor brackets for the six inch RV bumpers.